Interfacial energy states of moisture-exposed cracks in mica

Results of crack growth observations on mica in water-containing environments are described. The study focuses on equilibrium crack states for reversed loading cycles, i.e., for initial propagation through virgin solid and subsequent retraction-repropagation through healed or misoriented-healed interfaces. Departures from these equilibrium states are manifest as steady-state forward or backward crack velocities at specific applied loads. The equilibria are thereby interpreted as quiescent, threshold configurations G = W_E, with G the Griffith mechanical-energy-release rate and W_E the Dupré work of adhesion, on crack velocity (v-G) diagrams. Generally, W_E is found to decrease with concentration of water, in accordance with a Gibbs formalism. Hysteresis is observed in the forward-backward-forward crack propagation cycle, signifying a reduction in the adhesion energy on exposure of the open interface to environmental species prior to healing. This hysteresis is especially marked for those interfaces that are misoriented before healing, indicating that the structure of the underlying solid substrate as well as of the intervening fluid is an important consideration in the interface energetics. The equilibrium states for different environments can be represented on a simple energy-level diagram, as differences between thermodynamic end-point states: initial, closed-interface states refer to crystallographic bonding configurations ahead of the crack-tip adhesion zone; final, open interface states refer to configurations behind the crack-tip zone. The significance of this diagram in relation to the fundamental atomic structure of interfaces in fracture and other adhesion geometries, including implications concerning kinetics, is discussed.

An efficient MAC protocol with adaptive energy harvesting for machine-to-machine networks

In a machine-to-machine network, the throughput performance plays a very important role. Recently, an attractive energy harvesting technology has shown great potential to the improvement of the network throughput, as it can provide consistent energy for wireless devices to transmit data. Motivated by that, an efficient energy harvesting-based medium access control (MAC) protocol is designed in this paper. In this protocol, different devices first harvest energy adaptively and then contend the transmission opportunities with energy level related priorities. Then, a new model is proposed to obtain the optimal throughput of the network, together with the corresponding hybrid differential evolution algorithm, where the involved variables are energy-harvesting time, contending time, and contending probability. Analytical and simulation results show that the network based on the proposed MAC protocol has greater throughput than that of the traditional methods. In addition, as expected, our scheme has less transmission delay, further enhancing its superiority.

Luminescence and microstructure of Sr2Mg(BO3)2 doped with Eu

Sr₂Mg(B0₃)₂ doped with Eu was synthesized respectively in air and weak reducing atmosphere (combustion of carbon particle), whose photoluminescence characteristics and structure were also studied at room-temperature. In air, the fluorescent body's color was white for different synthesized temperatures. At room temperature, the sample was excited and showed red typical emission spectrum of Eu³⁺ whose emission apex were sharp near 612 nm and emission spect~m was made up of the charge transformation band (CTB) of Eu^{3 +} and excitation spectrum of 4f→4f high energy level transition, then reached the area of VUV. However, under reducing atmosphere (combustion of carbon particles), the color of the sample yielded was yellow, whose color became deeper with increasing temperature and showed phase transition. Using UV excitation, the luminescence of yellow sample was very weak. In a complicated broad spectrum at visible light area, the red emission spectrum of Eu²⁺ was not observed. Crystal structure and luminescence of the sample were completely different from the results of Diaz and Keszler. Two samples were prepared under oxidation and reducing atmosphere at high temperature, which were different on crystal structure and microstructure. By studying Sr₂Mg(B0₃)₂:Eu³⁺ a series of directional faults or educts were found, because Eu^{3 +} ions substituted for Sr^{2 +} ions. However, microstructure of Sr₂Mg(B0₃ )₂: Eu^{2 +} is more complicated, whose excitation spectrum might be excited by Eu^{2 +}. By XRD patten of the samples, phase transitibn could be found. Twins and clusters that were formed from point defect such as interstitial atom and big angle crystal boundary could be found by TEM.

Donor-п-acceptor conjugated copolymers for photovoltaic applications : tuning the open-circuit voltage by adjusting the donor/acceptor ratio

A class of new conjugated copolymers containing a donor (thiophene)−acceptor (2-pyran-4-ylidene-malononitrile) was synthesized via Stille coupling polymerization. The resulting copolymers were characterized by 1H NMR, elemental analysis, GPC, TGA, and DSC. UV−vis spectra indicated that the increase in the content of the thiophene units increased the interaction between the polymer main chains to cause a red-shift in the optical absorbance. Cyclic voltammetry was used to estimate the energy levels of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO) and the band gap (Eg) of the copolymers. The basic electronic structures of the copolymers were also studied by DFT calculations with the GGA/B3LYP function. Both the experimental and the calculated results indicated an increase in the HOMO energy level with increasing the content of thiophene units, whereas the corresponding change in the LUMO energy level was much smaller. Polymer photovoltaic cells of a bulk heterojunction were fabricated with the structure of ITO/PEDOT/PSS (30 nm)/copolymer−PCBM blend (70 nm)/Ca (8 nm)/Al (140 nm). It was found that the open-circuit voltage (Voc) increased (up to 0.93 V) with a decrease in the content of thiophene units. Although the observed power convention efficiency is still relatively low (up to 0.9%), the corresponding low fill factor (0.29) indicates considerable room for further improvement in the device performance. These results provided a novel concept for developing high Voc photovoltaic cells based on donor-π-acceptor conjugated copolymers by adjusting the donor/acceptor ratio.

Inspection of drop-weight impact damage in woven CFRP laminates fabricated by different processes

The influence of manufacturing process on the drop-weight impact damage in woven carbon/epoxy laminates was inspected by visual observation, dyepenetrant X-ray technique, and optical microscopy observation. The MTM56/ CF0300 woven quasi-isotropic laminates were fabricated by two processes: the autoclave and the Quickstep processes. Quickstep^TM is a novel composite manufacturing process, which was designed for the out-of-autoclave production of high-quality composite parts at lower cost. It utilizes higher heat conduction of fluid other than gas to transfer heat to components, which results in much shorter cure cycles. The laminates cured by this fast heating process showed different impact failure modes from those cured by the conventional autoclave process. The residual indentation in the top side of the Quickstep-cured laminates had a bigger diameter, but a smaller depth at the same impact energy level. Dye-penetrant X-ray revealed more intense and connected impact damage regions in the autoclave-cured laminates. Optical micrography as a supplementary method showed less severe matrix damage in the quickstep-cured laminates indicating a more ductile property of the resin matrix cured at a faster heating rate.

Adaptation of LEACH routing protocol to cognitive radio sensor networks

One of the drawbacks of LEACH protocol is the uncontrolled selection of cluster heads which, in some rounds, leads to the concentration of them in a limited area due to the randomness of the selection procedure. LEACH-C is a variant of LEACH that uses a centralized clustering algorithm and forms good clusters through sink control. According to experimental results, the IEEE 802.15.4 packets are damaged by WLAN interferences in ISM band. It seems that, sensor nodes equipped with cognitive radio capabilities can overcome this problem. In cognitive radio sensor networks (CRSN), routing must be accompanied by channel allocation. This requires spectrum management which can be devolved to cluster heads. For this networks, new duty cycle mechanisms must be designed that jointly consider neighbor discovery, and spectrum sensing/allocation. Cluster-based network architecture is a good choice for effective dynamic spectrum management. In such architecture, cluster heads have a proper spatial distribution and are optimally located all over the network. In this paper, using the physical layer information and preserving the feature of random cluster head selection in LEACH, it has been tried to both move the position of cluster heads to appropriate locations and make their quantity optimal. The simulation results show that the transferal of cluster heads to appropriate locations increases the network lifetime significantly though this comes at the price of early instability appearance. By considering the energy level in cluster head election algorithm, one can overcome the network stability issues too. However, this will move the cluster heads away from their appropriate locations. © 2012 IEEE.

Aggregation of a dibenzo[b,def]chrysene based organic photovoltaic material in solution

Detailed electrochemical studies have been undertaken on molecular aggregation of the organic semiconductor 7,14-bis((triisopropylsilyl)-ethynyl) dibenzo[b,def]chrysene (TIPS-DBC), which is used as an electron donor material in organic solar cells. Intermolecular association of neutral TIPS-DBC molecules was established by using 1H NMR spectroscopy as well as by the pronounced dependence of the color of TIPS-DBC solutions on concentration. Diffusion limited current data provided by near steady-state voltammetry also reveal aggregation. Furthermore, variation of concentration produces large changes in shapes of transient DC and Fourier transformed AC (FTAC) voltammograms for oxidation of TIPS-DBC in dichloromethane. Subtle effects of molecular aggregation on the reduction of TIPS-DBC are also revealed by the highly sensitive FTAC voltammetric method. Simulations of FTAC voltammetric data provide estimates of the kinetic and thermodynamic parameters associated with oxidation and reduction of TIPS-DBC. Significantly, aggregation of TIPS-DBC facilitates both one-electron oxidation and reduction by shifting the reversible potentials to less and more positive values, respectively. EPR spectroscopy is used to establish the identity of one-electron oxidized and reduced forms of TIPS-DBC. Implications of molecular aggregation on the HOMO energy level in solution are considered with respect to efficiency of organic photovoltaic devices utilizing TIPS-DBC as an electron donor material. © 2014 American Chemical Society.

Energy consumption at the state level: the unit root null hypothesis from Australia

In this paper, our goal is to examine the unit root null hypothesis in energy consumption for Australian states and territory. We consider sectoral energy consumption for Australia and its six states and one territory using time series data for the period 1973-2007. This is the first study that does this. Generally, except for some cases in South Australia, we find strong support that shocks to energy consumption have a temporary effect on energy consumption in Australia. © 2009 Elsevier Ltd. All rights reserved.

Performance of juvenile Murray cod, Maccullochella peelii peelii (Mitchell), fed with diets of different protein to energy ratio

The results of a 56-day experiment on juvenile Murray cod, Maccullochella peelii peelii, an Australian native fish with a high aquaculture potential, of mean weight 14.9 ± 0.04 g, fed with five experimental diets, one a series of 40% protein content and lipid levels of 10, 17 and 24% (P40L10, P40L17 and P40L24), and another of 50% protein and 17 and 24% (P50L17 and P50L24) lipid are presented. The specific growth rate (SGR) (% day−1) of fish maintained on different diets ranged from 1.18 to 1.41, and was not significantly different between dietary treatments, except P40L10 and the rest. However, there was a general tendency for SGR to increase with increasing dietary lipid content at both protein levels. The food conversion ratio (FCR) for the 40% protein series diets were poorer compared with those of the 50% protein diets, and the best FCR of 1.14 was observed with the P50L17 diet. The protein efficiency ratio (PER), however, was better in fish reared on low protein diets. The net protein utilization (NPU) also did not differ significantly (P > 0.05) in relation to dietary treatment. As in the case of PER the highest NPU was observed in Murray cod reared on diet P40L24 and the lowest in fish fed with diet P50L24. The carcass lipid content reflected that of the diets, when significant increases in the lipid content was observed in relation to dietary lipid content at both protein levels. However, body muscle lipid content did not increase with increasing dietary lipid content, and was significantly lower than in the whole body. The fatty acids found in highest concentration amongst the saturates, monoenes and polyunsaturates (PUFAs) were 16 : 0, 18 : 1n-9 and 22 : 6n-3, respectively, and each of these accounted for more than 60% of each of the group's total. The muscle fatty acid content was affected by the dietary lipid content; for example the total amount (in μg mg−1 lipid) of monoenes ranged from 72 ± 5.1 (P40L10) to 112 ± 10 (P40L24) and 112 ± 2.8 (P50L17) to 132 ± 11.8 (P50L24) and the n-6 series fatty acids increased with increasing dietary lipid content, although not always significant. Most notably, 18 : 2n-6 increased with the dietary lipid level in both series of diets.

Effect of yarn hairiness on energy consumption in rotating a ring-spun yarn package

The effect of yarn hairiness on energy consumption when rotating a ring-spun yarn package is investigated theoretically and experimentally. A theoretical model is developed to calculate the energy required to rotate hair fibers, based on hair length and number as well as package speed and size. A single spindle test rig is used to verify the theoretical prediction. The experimental results confirm the theoretical prediction that the package power increases with increased yarn hairiness level and spindle speed.

Energy, protein, calcium, vitamin D and fibre intakes from meals in residential care establishments in Australia

Residents from high level (nursing homes) and low-level care facilities (hostel) being served the three common diet texture modifications (full diet, soft-minced diet and pureed diet) were assessed. Individual plate waste was estimated at three meals on one day. Fifty-six males and 156 females, mean age 82.9+/-9.5 (SD) years, of which 139 lived in nursing homes (NH) and 76 in hostels (H) were included. Mean total energy served from meals was 5.3 MJ/day, 5.1 to 5.6 MJ/day, 95% confidence intervals (CI), in NH which was less than in H, 5.9 MJ/day (CI 5.6 to 6.2 MJ/day) (P=0.007). Protein and calcium intakes were lower in NH, 44.5g (CI 41.5 to 47.5g), 359.0mg (CI 333.2 to 384.8mg), versus 50.5g (CI 46.6 to 54.3g), 480.5mg (CI 444.3 to 516.7mg) in H (P=0.017, P<0.001 respectively). There was no difference in nutrient/energy ratios, except for protein/energy, which was higher in NH 11.7 (CI 11.3 to 12.2) than in H 9.8 (CI 9.4 to 10.3) (P<0.001). Ability to self-feed had no significant effect on nutrient intakes in NH. The self fed group (N=63) had the following nutrient intakes: energy 4.0 MJ (CI 3.6 to 4.3 MJ), protein 44.6g (CI 40.3 to 48.9g), calcium 356.9mg (CI 316.3 to 397.4mg), fibre 14.9g (CI 13.2 to 16.5g). The assisted group (N=64) had the following nutrient intakes: energy 3.9MJ (CI 3.6 to 4.2MJ), protein 46.0g (CI 40.7 to 49.6), calcium 361.9mg (CI 327.8 to 396.1mg), fibre 14.9g (CI 13.2 to 16.1g). Of NH classified as eating impaired, 36% received no assistance with feeding and had lower intakes of protein 37.8g (CI 33.0 to 42.1g) compared to those receiving some assistance 46.1g (CI 41.3 to 50.9g) (P=0.026). Reduced energy intake accounted for the differences in nutrient intakes between nursing homes and hostels, except for protein. Strategies to effectively monitor nutrient intakes and to identify those with eating impairment are required in order to ensure adequate nutrition of residents in nursing homes and hostels.

Lower permian oncolites from South China: implications for equatorial sea-level responses to late palaeozoic Gondwanan glaciation

The oncoid-bearing Chuanshan Formation is a regionally extensive carbonate deposit of predominantly Asselian to early Sakmarian (Early Permian) age in South China, occupying an area of some 500,000 km2. Throughout South China, the oncoid-bearing horizons are generally stable and broadly comparable in lithology, fossil content and the morphology of the oncoid grains. Four types of microfacies are recognized from the oncolite succession and overall they suggest a moderate- to high-energy, wave-agitated shallow marine carbonate platform environment. An analysis of the stratigraphic distribution of oncoid grain size, density, thickness and the bedding structures of the oncolite beds and the number of coating laminae indicate the presence of metre-scale cyclothems, suggestive of possible high-frequency cycles of sea-level fluctuation. Compared to carbonate successions above and below that lack oncolites, and in conjunction with evidence from sequence stratigraphic and isotopic geochemical analyses of coeval carbonate deposits in South China and elsewhere, the origin of the Chuanshan oncolites is linked to a drastic drop in global sea-level at the Pennsylvanian–Permian boundary, that can be correlated closely in timing with the zenith of the Late Palaeozoic Gondwanan glaciation. It is further suggested that the eustatic changes apparent from the deposition of the Chuanshan oncolites and similar coeval deposits in lower palaeolatitudes were coupled with, and influenced by, the contemporaneous high-latitude Gondwanan glaciation, the largest and longest known such event in Phanerozoic Earth history.

Energy system interaction and relative contribution during maximal exercise

There are 3 distinct yet closely integrated processes that operate together to satisfy the energy requirements of muscle. The anaerobic energy system is divided into alactic and lactic components, referring to the processes  involved in the splitting of the stored phosphagens, ATP and  phosphocreatine (PCr), and the nonaerobic breakdown of carbohydrate to lactic acid through glycolysis. The aerobic energy system refers to the combustion of carbohydrates and fats in the presence of oxygen. The anaerobic pathways are capable of regenerating ATP at high rates yet are limited by the amount of energy that can be released in a single bout of intense exercise. In contrast, the aerobic system has an enormous capacity yet is somewhat hampered in its ability to delivery energy quickly. The focus of this review is on the interaction and relative contribution of the energy systems during single bouts of maximal exercise. A particular emphasis has been placed on the role of the aerobic energy system during high intensity exercise.

Attempts to depict the interaction and relative contribution of the energy systems during maximal exercise first appeared in the 1960s and 1970s. While insightful at the time, these representations were based on calculations of anaerobic energy release that now appear questionable. Given repeated reproduction over the years, these early attempts have lead to 2 common misconceptions in the exercise science and coaching professions. First, that the energy systems respond to the demands of intense exercise in an almost sequential manner, and secondly, that the aerobic system responds slowly to these energy demands, thereby playing little role in determining performance over short durations. More recent research suggests that energy is derived from each of the energy-producing pathways during almost all exercise activities. The duration of maximal exercise at which equal contributions are derived from the anaerobic and aerobic energy systems appears to occur between 1 to 2 minutes and most probably around 75 seconds, a time that is considerably earlier than has traditionally been suggested.

Photosynthesis of hydrogen and methane as key components for clean energy system

While researchers are trying to solve the world's energy woes, hydrogen is becoming the key component in sustainable energy systems. Hydrogen could be produced through photocatalytic water-splitting technology. It has also been found that hydrogen and methane could be produced through photocatalytic reduction of carbon dioxide with water. In this exploratory study, instead of coating catalysts on a substrate, pellet form of catalyst, which has better adsorption capacity, was used in the photo-reduction of carbon dioxide with water. In the experiment, some water was first absorbed into titanium dioxide pellets. Highly purified carbon dioxide gas was then discharged into a reactor containing these wet pellets, which were then illuminated continuously using UVC lamps. Gaseous samples accumulated in the reactor were extracted at different intervals to analyze the product yields. The results confirmed that methane and hydrogen were photosynthesized using pellet form of TiO₂ catalysts. Hydrogen was formed at a rate as high as 0.16 micromoles per hour (μmol h⁻¹). The maximum formation rate of CH₄ was achieved at 0.25 μmol h⁻¹ after 24 h of irradiation. CO was also detected.

Under-reporting of energy intake in the 1997 national nutrition survey

Aims To estimate the level of under-reporting of energy intake by gender, age, ethnicity and body size (normal, overweight, obese) in the 1997 National Nutrition Survey (NNS97) in New Zealand.
Methods Data were from 4,258 participants (1,808 men and 2,450 women aged 15 years and over) who completed the 24-hour diet recall; the primary methodology used in the NNS97. Under-reporting was assessed using the ratio of reported energy intake to estimated resting metabolic rate (EI: RMRest). Cut-off limits were used to identify percentages of under-reporters in the various subgroups.
Results Mean EI: RMRest was 1.40 for all participants (1.51 for men, 1.30 for women, p<0.001) with older age being associated with lower EI: RMRest (p<0.001). There were no significant differences in mean EI: RMRest between ethnic groups for men.
Mean EI: RMRest for women were: Maori 1.46, European 1.29, and Pacific 1.37 (p<0.01). A larger body size was associated with a significantly lower EI: RMRest especially for women.
Percentages of ‘definite’ under-reporters (individual EI: RMRest <0.9) were as follows: men 12%, women 21%; Europeans 16%, Maori 23% and Pacific 26%; normal weight (11%), overweight (19%) and obese (27%) participants; and from 10% in the youngest to 23% in the oldest age group (p<0.001 for all results).
Conclusion In this study, in agreement with the literature, women, older people and obese people under-reported more than men, younger people and non-obese people. Possible ethnic differences in under-reporting rates need further study. Care is needed in interpreting the energy intake data from the NNS97.