Urbanization, openness, emissions, and energy intensity: a study of increasingly urbanized emerging economies

This paper analyses the impact of urbanization and trade openness on emissions and energy intensity in twenty-two increasingly urbanized emerging economies. We employ three second-generation heterogeneous linear panel models as well as recently developed nonlinear panel estimation techniques allowing for cross-sectional dependence. The empirical results show that population density and affluence increase emissions and energy intensity while renewable energy seems to be dormant in these emerging economies, but non-renewable energy increases both CO2 emissions and energy intensity. In addition, openness significantly reduces both pollutant emissions and energy intensity whereas urbanization significantly increases energy intensity, but it is insignificant in increasing emissions. This may be, in part, due to the recent increasing trend in adopting cleaner technologies in these increasingly urbanized developing economies.

Comprehensive embodied energy analysis framework

The assessment of the direct and indirect requirements for energy is known as embodied energy analysis. For buildings, the direct energy includes that used primarily on site, while the indirect energy includes primarily the energy required for the manufacture of building materials. This thesis is concerned with the completeness and reliability of embodied energy analysis methods. Previous methods tend to address either one of these issues, but not both at the same time. Industry-based methods are incomplete. National statistical methods, while comprehensive, are a ‘black box’ and are subject to errors. A new hybrid embodied energy analysis method is derived to optimise the benefits of previous methods while minimising their flaws. In industry-based studies, known as ‘process analyses’, the energy embodied in a product is traced laboriously upstream by examining the inputs to each preceding process towards raw materials. Process analyses can be significantly incomplete, due to increasing complexity. The other major embodied energy analysis method, ‘input-output analysis’, comprises the use of national statistics. While the input-output framework is comprehensive, many inherent assumptions make the results unreliable. Hybrid analysis methods involve the combination of the two major embodied energy analysis methods discussed above, either based on process analysis or input-output analysis. The intention in both hybrid analysis methods is to reduce errors associated with the two major methods on which they are based. However, the problems inherent to each of the original methods tend to remain, to some degree, in the associated hybrid versions. Process-based hybrid analyses tend to be incomplete, due to the exclusions associated with the process analysis framework. However, input-output-based hybrid analyses tend to be unreliable because the substitution of process analysis data into the input-output framework causes unwanted indirect effects. A key deficiency in previous input-output-based hybrid analysis methods is that the input-output model is a ‘black box’, since important flows of goods and services with respect to the embodied energy of a sector cannot be readily identified. A new input-output-based hybrid analysis method was therefore developed, requiring the decomposition of the input-output model into mutually exclusive components (ie, ‘direct energy paths’). A direct energy path represents a discrete energy requirement, possibly occurring one or more transactions upstream from the process under consideration. For example, the energy required directly to manufacture the steel used in the construction of a building would represent a direct energy path of one non-energy transaction in length. A direct energy path comprises a ‘product quantity’ (for example, the total tonnes of cement used) and a ‘direct energy intensity’ (for example, the energy required directly for cement manufacture, per tonne). The input-output model was decomposed into direct energy paths for the ‘residential building construction’ sector. It was shown that 592 direct energy paths were required to describe 90% of the overall total energy intensity for ‘residential building construction’. By extracting direct energy paths using yet smaller threshold values, they were shown to be mutually exclusive. Consequently, the modification of direct energy paths using process analysis data does not cause unwanted indirect effects. A non-standard individual residential building was then selected to demonstrate the benefits of the new input-output-based hybrid analysis method in cases where the products of a sector may not be similar. Particular direct energy paths were modified with case specific process analysis data. Product quantities and direct energy intensities were derived and used to modify some of the direct energy paths. The intention of this demonstration was to determine whether 90% of the total embodied energy calculated for the building could comprise the process analysis data normally collected for the building. However, it was found that only 51% of the total comprised normally collected process analysis. The integration of process analysis data with 90% of the direct energy paths by value was unsuccessful because: • typically only one of the direct energy path components was modified using process analysis data (ie, either the product quantity or the direct energy intensity); • of the complexity of the paths derived for ‘residential building construction’; and • of the lack of reliable and consistent process analysis data from industry, for both product quantities and direct energy intensities. While the input-output model used was the best available for Australia, many errors were likely to be carried through to the direct energy paths for ‘residential building construction’. Consequently, both the value and relative importance of the direct energy paths for ‘residential building construction’ were generally found to be a poor model for the demonstration building. This was expected. Nevertheless, in the absence of better data from industry, the input-output data is likely to remain the most appropriate for completing the framework of embodied energy analyses of many types of products—even in non-standard cases. ‘Residential building construction’ was one of the 22 most complex Australian economic sectors (ie, comprising those requiring between 592 and 3215 direct energy paths to describe 90% of their total energy intensities). Consequently, for the other 87 non-energy sectors of the Australian economy, the input-output-based hybrid analysis method is likely to produce more reliable results than those calculated for the demonstration building using the direct energy paths for ‘residential building construction’. For more complex sectors than ‘residential building construction’, the new input-output-based hybrid analysis method derived here allows available process analysis data to be integrated with the input-output data in a comprehensive framework. The proportion of the result comprising the more reliable process analysis data can be calculated and used as a measure of the reliability of the result for that product or part of the product being analysed (for example, a building material or component). To ensure that future applications of the new input-output-based hybrid analysis method produce reliable results, new sources of process analysis data are required, including for such processes as services (for example, ‘banking’) and processes involving the transformation of basic materials into complex products (for example, steel and copper into an electric motor). However, even considering the limitations of the demonstration described above, the new input-output-based hybrid analysis method developed achieved the aim of the thesis: to develop a new embodied energy analysis method that allows reliable process analysis data to be integrated into the comprehensive, yet unreliable, input-output framework. Plain language summary Embodied energy analysis comprises the assessment of the direct and indirect energy requirements associated with a process. For example, the construction of a building requires the manufacture of steel structural members, and thus indirectly requires the energy used directly and indirectly in their manufacture. Embodied energy is an important measure of ecological sustainability because energy is used in virtually every human activity and many of these activities are interrelated. This thesis is concerned with the relationship between the completeness of embodied energy analysis methods and their reliability. However, previous industry-based methods, while reliable, are incomplete. Previous national statistical methods, while comprehensive, are a ‘black box’ subject to errors. A new method is derived, involving the decomposition of the comprehensive national statistical model into components that can be modified discretely using the more reliable industry data, and is demonstrated for an individual building. The demonstration failed to integrate enough industry data into the national statistical model, due to the unexpected complexity of the national statistical data and the lack of available industry data regarding energy and non-energy product requirements. These unique findings highlight the flaws in previous methods. Reliable process analysis and input-output data are required, particularly for those processes that were unable to be examined in the demonstration of the new embodied energy analysis method. This includes the energy requirements of services sectors, such as banking, and processes involving the transformation of basic materials into complex products, such as refrigerators. The application of the new method to less complex products, such as individual building materials or components, is likely to be more successful than to the residential building demonstration.

Towards solutions for a liveable future: progress, practice, performance, people: Proceedings of the 41st Annual Conference of the Architectural Science Association ANZAScA

There is hope! Since Al Gore disclosed the inconvenient truth, the climate has changed. The time of denial is over; the era of well-informed action and sound development is with us. Sustainability has now moved from the fringe, into the mainstream of politics, society, architecture and building practice. In this new context architectural science will contribute to two main tasks: prevent further damage to our environment, and respond to challenges invoked by climate change.
The built environment and human activity within it account for a large part of the problem. Architectural science and architectural practice are part of the solution. The ANZAScA 2007 conference focuses on the solutions architectural science has to offer toward a liveable future through the following generic themes:
progress – the evaluation and improvement of built facilities, new and existing, in terms of energy intensity, financial reward and environmental impact.
practice – the relationship between our cultural heritage, new facility design, retrofit design and its realisation
through construction.
performance – the connection between building operation targets, validation of performance, and user comfort and interaction in new and existing environments.
people – the effect of space on user behaviour, user responsibility and social wealth.
In response to this challenge, architectural science researchers including students, educators, and practitioners at ANZAScA 2007, present a broad range of research activity and concern within the built environment from global issues down to the specific actions of individuals.

Agriculture, trade openness and emissions: an empirical analysis and policy options

This article investigates the impact of sectoral production allocation, energy usage patterns and trade openness on pollutant emissions in a panel consisting of high-, medium- and low-income countries. Extended STIRPAT (Stochastic Impact by Regression on Population, Affluence and Technology) and EKC (Environmental Kuznets Curve) models are conducted to systematically identify these factors driving CO2 emissions in these countries during the period 1980–2010. To this end, the studyemploys three different heterogeneous, dynamic mean group-type linear panel modelsand one nonlinear panel data estimation procedure that allows for cross-sectionaldependence. While affluence, nonrenewable energy consumption and energy intensity variables are found to drive pollutant emissions in linear models, population is also found to be a significant driver in the nonlinear model. Both service sector and agricultural value-added levels play a significant role in reducing pollution levels, whereas industrialisation increases pollution levels. Although the linear model fails totrack any significant impact of trade openness, the nonlinear model finds trade liberalisation to significantly affect emission reduction levels. All of these results suggest that economic development, and especially industrialisation strategies and environmental policies, need to be coordinated to play a greater role in emission reduction due to trade liberalisation.

Fabrication of polymeric microchannels with focused and defocused CO2 lasers

 The control of energy distribution or energy intensity inside a laser spot using a defocusing method enables the formation of high-quality microchannels of multiple cross-sections in polycarbonate. Moreover, a thermal mathematical model of the process was developed to aid understanding of the process and to allow channel topology prediction.

Solar heating for commercial swimming pools – experiences in south-eastern Australia

Commercial swimming pools, particularly aquatic centres are increasingly common features of large towns and cities in Australia as people are encouraged to increase their levels of physical activity. Swimming is regarded as a low impact form of exercise and use of indoor facilities allows this to continue all-year round. Aquatic centres are large users of energy for water and space heating with an energy intensity which can be up to seven times that of a commercial office building in Australia. Much of the energy is used to heat water to relatively low temperatures and therefore solar energy technology is capable of providing this energy. In the residential sector, solar thermal systems for heating water and swimming pools is well-established. This is not the case for commercial swimming pools i.e. aquatic centres. In Victoria, a program to encourage commercial pool operators to install solar systems was funded in the early 1980s. This paper describes an investigation into the current use of and attitudes to solar systems in commercial pools through a survey of municipal pool operators in Victoria, south-eastern Australia. The survey found that there has been very little increase in the use of solar energy and that barriers to the use of the technology remain the same as they were nearly 30 years ago. Lack of roof area, poor payback periods and an inability of solar to meet pool heating needs are the most common misconceptions. To improve the uptake of solar heating in commercial pools, further research, particularly looking at the feasibility of integrating traditional heat sources with solar collectors using smart control, is required. An incentive programme and the education of the new generation of consultants and aquatic centre operators, unfamiliar with the potential benefits of solar systems, would also help to increase their uptake.

Energy system interaction and relative contribution during maximal exercise

There are 3 distinct yet closely integrated processes that operate together to satisfy the energy requirements of muscle. The anaerobic energy system is divided into alactic and lactic components, referring to the processes  involved in the splitting of the stored phosphagens, ATP and  phosphocreatine (PCr), and the nonaerobic breakdown of carbohydrate to lactic acid through glycolysis. The aerobic energy system refers to the combustion of carbohydrates and fats in the presence of oxygen. The anaerobic pathways are capable of regenerating ATP at high rates yet are limited by the amount of energy that can be released in a single bout of intense exercise. In contrast, the aerobic system has an enormous capacity yet is somewhat hampered in its ability to delivery energy quickly. The focus of this review is on the interaction and relative contribution of the energy systems during single bouts of maximal exercise. A particular emphasis has been placed on the role of the aerobic energy system during high intensity exercise.

Attempts to depict the interaction and relative contribution of the energy systems during maximal exercise first appeared in the 1960s and 1970s. While insightful at the time, these representations were based on calculations of anaerobic energy release that now appear questionable. Given repeated reproduction over the years, these early attempts have lead to 2 common misconceptions in the exercise science and coaching professions. First, that the energy systems respond to the demands of intense exercise in an almost sequential manner, and secondly, that the aerobic system responds slowly to these energy demands, thereby playing little role in determining performance over short durations. More recent research suggests that energy is derived from each of the energy-producing pathways during almost all exercise activities. The duration of maximal exercise at which equal contributions are derived from the anaerobic and aerobic energy systems appears to occur between 1 to 2 minutes and most probably around 75 seconds, a time that is considerably earlier than has traditionally been suggested.

A study on energy performance of hotel buildings in Singapore

This paper presents a study on energy performance of Singapore's hotel buildings. Energy consumption data and other pertinent information were collected from 29 quality hotels through a national survey. Building features and operational characteristics contributing to the variations in hotel energy performance were discussed. The annual average total energy use intensity (EUI) in these hotels is 427 kWh/m2. Electricity and gas are used in all sampled hotels, and some hotels also use diesel to power standby generator or hot water boiler. We also investigated relationships between electricity consumption and number of occupied rooms in individual hotels; the weak correlations found indicate it is necessary to improve energy management when occupancy rate is low. Besides, Pearson correlations between hotel energy use intensity and possible explanatory indicators revealed that three-star hotels differ from high class establishments in energy use. Worker density and years after the last major energy retrofit were also found to be highly correlated to hotel building energy use intensity. Also discussed in this paper is the effect of weather conditions on electricity consumption of the hotels.

Pacing strategy and high-intensity cycling performance

This thesis found that a brief maximal acceleration, followed by a steady effort thereafter is the most effective pacing strategy for intense, short-term cycling performance. This strategy leads to an increase in aerobic energy supply early in exercise, which contributes to a faster speed throughout the race.

Investigation of the postcure reaction and surface energy of epoxy resins using time-of-flight secondary ion mass spectrometry and contact-angle measurements

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to investigate correlations between the molecular changes and postcuring reaction on the surface of a diglycidyl ether of bisphenol A and diglycidylether of bisphenol F based epoxy resin cured with two different amine-based hardeners. The aim of this work was to present a proof of concept that ToF-SIMS has the ability to provide information regarding the reaction steps, path, and mechanism for organic reactions in general and for epoxy resin curing and postcuring reactions in particular. Contact-angle measurements were taken for the cured and postcured epoxy resins to correlate changes in the surface energy with the molecular structure of the surface. Principal components analysis (PCA) of the ToFSIMS positive spectra explained the variance in the molecular information, which was related to the resin curing and postcuring reactions with different hardeners and to the surface energy values. The first principal component captured information related to the chemical phenomena of the curing reaction path, branching, and network density based on changes in the relative ion density of the aliphatic hydrocarbon and the C₇H₇O⁺ positive ions. The second principal component captured information related to the difference in the surface energy, which was correlated to the difference in the relative intensity of the C_xH_yN_z⁺ ions of the samples. PCA of the negative spectra provided insight into the extent of consumption of the hardener molecules in the curing and postcuring reactions of both systems based on the relative ion intensity of the nitrogen-containing negative ions and showed molecular correlations with the sample surface energy.

Energy expenditure in adolescents playing new generation computer games

Objective: To compare the energy expenditure of adolescents when playing sedentary and new generation active computer games.

Design: Cross sectional comparison of four computer games. Setting Research laboratories.

Participants: Six boys and five girls aged 13–15 years.

Procedure: Participants were fitted with a monitoring device validated to predict energy expenditure. They played four computer games for 15 minutes each. One of the games was sedentary (XBOX 360) and the other three were active (Wii Sports).

Main outcome measure: Predicted energy expenditure, compared using repeated measures analysis of variance.

Results: Mean (standard deviation) predicted energy expenditure when playing Wii Sports bowling (190.6 (22.2) kl/kg/min), tennis (202.5 (31.5) kl/kg/min), and boxing (198.1 (33.9) kl/kg/min) was significantly greater than when playing sedentary games (125.5 (13.7) kl/kg/min) (P<0.001). Predicted energy expenditure was at least 65.1 (95% confidence interval 47.3 to 82.9) kl/kg/min greater when playing active rather than sedentary games.

Conclusions: Playing new generation active computer games uses significantly more energy than playing sedentary computer games but not as much energy as playing the sport itself. The energy used when playing active Wii Sports games was not of high enough intensity to contribute towards the recommended daily amount of exercise in children.

Comparison of energy expenditure in adolescents when playing new generation and sedentary computer games: cross sectional study

Objective : To compare the energy expenditure of adolescents when playing sedentary and new generation active computer games.

Design : Cross sectional comparison of four computer games.

Setting : Research laboratories.

Participants : Six boys and five girls aged 13-15 years.

Procedure : Participants were fitted with a monitoring device validated to predict energy expenditure. They played four computer games for 15 minutes each. One of the games was sedentary (XBOX 360) and the other three were active (Wii Sports).

Main outcome measure : Predicted energy expenditure, compared using repeated measures analysis of variance.

Results : Mean (standard deviation) predicted energy expenditure when playing Wii Sports bowling (190.6 (22.2) kJ/kg/min), tennis (202.5 (31.5) kJ/kg/min), and boxing (198.1 (33.9) kJ/kg/min) was significantly greater than when playing sedentary games (125.5 (13.7) kJ/kg/min) (P<0.001). Predicted energy expenditure was at least 65.1 (95% confidence interval 47.3 to 82.9) kJ/kg/min greater when playing active rather than sedentary games.

Conclusions : Playing new generation active computer games uses significantly more energy than playing sedentary computer games but not as much energy as playing the sport itself. The energy used when playing active Wii Sports games was not of high enough intensity to contribute towards the recommended daily amount of exercise in children.

The association between perceived sweetness intensity and dietary intake in young adults

Individual differences in taste perception may influence dietary habits, nutritional status, and ultimately nutrition-related chronic disease risk. Individual differences in sweetness intensity perception and the relationship between perceived sweetness intensity, food behaviors, and dietary intake was investigated in 85 adults. Subjects (body mass index [BMI]= 21 ± 3, 21 ± 4 y) completed a food and diet questionnaire, food variety survey, 2 24-h food records, and a perceived sweetness intensity measurement using the general labeled magnitude scale (gLMS). There was interindividual variation in perceived sweetness intensity (0 to 34 gLMS units, mean 10 ± 7). One-way analysis of variance (ANOVA) revealed no difference between perceived sweetness intensity and degree of importance placed on not adding sugar to tea or coffee (P = 0.2) and the degree of importance placed on avoiding sugar-sweetened or fizzy drinks (P = 1.0). Independent t-test analysis revealed no significant association between perceived sweetness intensity and the food variety measure for sugar and confectionary intake (P = 0.6) and selected fruit and vegetable intake (P = 0.1 to 0.9). One-way ANOVA also demonstrated no difference between tertiles of sweetness intensity and BMI (P = 0.1), age (P = 0.3), and food variety score (P = 0.5). No correlation was observed with regards to perceived sweetness intensity and mean total energy (kJ) intake (r = 0.05, P = 0.7), percent energy from total fat, saturated fat, protein, carbohydrate, and grams of fiber (r =–0.1 to 0.1, P = 0.2 to 0.8) and also for intake of the micronutrients: folate, magnesium, calcium, iron, and zinc (r = 0.1 to 0.2, P = 0.1 to 0.4). Only modest correlations were observed between sodium (r = 0.3, P < 0.05), vitamin C (r = 0.3, P < 0.05), and potassium (r = 0.2, P < 0.0) intake and perceived sweetness intensity. Overall, perceived sweetness intensity does not appear to play a role in food behaviors relating to sugar consumption and dietary intake in adults.

Predictive validity and classification accuracy of ActiGraph energy expenditure equations and cut-points in young children

Objectives
Evaluate the predictive validity of ActiGraph energy expenditure equations and the classification accuracy of physical activity intensity cut-points in preschoolers.

Methods
Forty children aged 4–6 years (5.3±1.0 years) completed a ~150-min room calorimeter protocol involving age-appropriate sedentary, light and moderate-to vigorous-intensity physical activities. Children wore an ActiGraph GT3X on the right mid-axillary line of the hip. Energy expenditure measured by room calorimetry and physical activity intensity classified using direct observation were the criterion methods. Energy expenditure was predicted using Pate and Puyau equations. Physical activity intensity was classified using Evenson, Sirard, Van Cauwenberghe, Pate, Puyau, and Reilly, ActiGraph cut-points.

Results
The Pate equation significantly overestimated VO2 during sedentary behaviors, light physical activities and total VO2 (P<0.001). No difference was found between measured and predicted VO2 during moderate-to vigorous-intensity physical activities (P = 0.072). The Puyau equation significantly underestimated activity energy expenditure during moderate-to vigorous-intensity physical activities, light-intensity physical activities and total activity energy expenditure (P<0.0125). However, no overestimation of activity energy expenditure during sedentary behavior was found. The Evenson cut-point demonstrated significantly higher accuracy for classifying sedentary behaviors and light-intensity physical activities than others. Classification accuracy for moderate-to vigorous-intensity physical activities was significantly higher for Pate than others.

Conclusion
Available ActiGraph equations do not provide accurate estimates of energy expenditure across physical activity intensities in preschoolers. Cut-points of ≤25counts⋅15 s−1 and ≥420 counts⋅15 s−1 for classifying sedentary behaviors and moderate-to vigorous-intensity physical activities, respectively, are recommended.

Exercise training during energy restriction in clinically severe obesity

 In women with clinically severe obesity, 250 minutes of moderate to vigorous intensity aerobic and resistance exercise training combined with energy restriction facilitated fat mass loss and protected against lean mass loss. Additionally, exercise training resulted in clinically meaningful improvements in fitness, physical function, and markers of cardiometabolic disease.