Quasiclassical trajectory calculations of collisional energy transfer in propane systems: multiple direct-encounter hard-sphere model

Quasiclassical trajectory calculations of collisional energy transfer from highly vibrationally excited propane + rare gas systems are reported. This work extends our hard-sphere model (A. Linhananta and K. F. Lim, Phys. Chem. Chem. Phys., 2000, 2, 1385) to examine the variation of the internal energy during collisions with a rare bath gas. This was accomplished by recording the vibrational and rotational energy of propane after each atom–atom encounter during trajectory simulations of propane + rare gas systems. This provides detailed information of the energy flow during a collision. It was found that collisions with small number of encounters transfer energy efficiently, whereas those with many encounters do not. Detailed analyses reveal that the former collisions arise from trajectories with high initial impact parameter, whereas the latter have small initial impact parameter. The reason behind this is the dependence of collision energy transfer (CET) of large polyatomic molecules on their shape. This is connected to the well-known role of rotational energy transfer (RET) as a gateway for CET.

Biomass and energy transfer to baleen whales in the South Atlantic sector of the Southern Ocean

Baleen whales are an important group of predators on Antarctic krill in the Southern Ocean. During the CCAMLR 2000 Survey to estimate the biomass and distribution of Antarctic krill, International Whaling Commission observers carried out a visual line transect survey to estimate the number of baleen whales occurring in the survey area. This paper reviews techniques used to estimate krill consumption by baleen whales and in combination with estimates of whale abundance estimates of krill consumption are generated for the South Atlantic sector of the Southern Ocean. This survey estimates that the present populations of whales feeding in this region are likely to consume approximately 1.6 million tonnes, but possibly up to as much as 2.7 million tonnes of krill within the summer season. Although this only represents 4–6% of the estimated krill biomass in the region (and probably less than this percentage of the total annual krill production), the depleted numbers of baleen whales resulting from past or current whaling activities should be taken into account when setting quotas for the commercial exploitation of krill if there is to be a recovery to pre-exploitation biomass levels of baleen whales.

Influence of maternal mass and condition on energy transfer in Weddell seals

* 1
Environmental variation influences food abundance and availability, which is reflected in the reproductive success of top predators. We examined maternal expenditure, offspring mass and condition for Weddell seals in 2 years when individuals exhibited marked differences in these traits.
* 2
For females weighing 355 kg there was a positive relationship between maternal post-partum mass (MPPM) and lactation length, but below this there was no relationship, suggesting that heavier females were able to increase lactation length but lighter females were restricted to a minimum lactation period of 33 days.
* 3
Overall, females were heavier in 2002, but in 2003 shorter females were lighter than similar-sized females in 2002 suggesting that the effects of environmental variability on foraging success and condition are more pronounced in smaller individuals.
* 4
There was no relationship between MPPM and pup birth mass, indicating pre-partum investment did not differ between years. However, there was a positive relationship between MPPM and pup mass gain. Mass and energy transfer efficiency were 10·2 and 5·4% higher in 2002 than 2003, which suggests costs associated with a putatively poor-resource year were delayed until lactation.
* 5
Heavier females lost a higher proportion of mass during lactation in both years, so smaller females may not have been able to provide more to their offspring to wean a pup of similar size to larger females.
* 6
MPPM had only a small influence on total body lipid; therefore, regardless of mass, females had the same relative body composition. Females with male pups lost a higher percentage of lipid than those with female pups, but by the end of lactation female pups had 4·5% higher lipid content than males.
* 7
It appears that for Weddell seals the consequences of environmentally induced variation in food availability are manifested in differences in maternal mass and expenditure during lactation. These differences translate to changes in pup mass and condition at weaning with potential consequences for future survival and recruitment.

Src homology 3-domain growth factor receptor-bound 2-like (endophilin) interacting protein 1, a novel neuronal protein that regulates energy balance

To identify genes involved in the central regulation of energy balance, we compared hypothalamic mRNA from lean and obese Psammomys obesus, a polygenic model of obesity, using differential display PCR. One mRNA transcript was observed to be elevated in obese, and obese diabetic, P. obesus compared with lean animals and was subsequently found to be increased 4-fold in the hypothalamus of lethal yellow agouti (Ay/a) mice, a murine model of obesity and diabetes. Intracerebroventricular infusion of antisense oligonucleotide targeted to this transcript selectively suppressed its hypothalamic mRNA levels and resulted in loss of body weight in both P. obesus and Sprague Dawley rats. Reductions in body weight were mediated by profoundly reduced food intake without a concomitant reduction in metabolic rate. Yeast two-hybrid screening, and confirmation in mammalian cells by bioluminescence resonance energy transfer analysis, demonstrated that the protein it encodes interacts with endophilins, mediators of synaptic vesicle recycling and receptor endocytosis in the brain. We therefore named this transcript Src homology 3-domain growth factor receptor-bound 2-like (endophilin) interacting protein 1 (SGIP1). SGIP1 encodes a large proline-rich protein that is expressed predominantly in the brain and is highly conserved between species. Together these data suggest that SGIP1 is an important and novel member of the group of neuronal molecules required for the regulation of energy homeostasis.

The next step in energy rating: the international ETTV method vs. BCA Section-J glazing calculator

The most important prevention in minimizing energy transfer in commercial buildings is the treatment of glazing in the building facade. In a commercial building, while the impacts of roof, walls and floors on the overall heating and cooling loads of the building have low effects, glazing is likely to be the most important factor. This paper investigates the BCA Section-J glazing calculator and the ETTV (Envelope Thermal Transfer Value) methods and tries to look for differences as well as similarities in calculation of building envelopes energy performance. For this investigation, a hypothetical high-rise commercial building in Melbourne, Australia is considered when evaluating the energy performance of the envelope through these two methods. Both methods consider the U-Value of glass and wall materials as well as Solar Heat Gain Coefficient (SHGC) and Shading Coefficient (SC) of the glass. Findings in this research project indicate differences and significant discrepancies between the BCA Section-J and ETTV methods in evaluating the energy performance of commercial building façades. Issues of calculation weaknesses are identified with the lack of air leakage and infiltration of a particular façade design or window to wall ratio (WWR). Suggestions have been made where improvement to the overall energy calculation through facades of a commercial building is needed.

Numerical investigation of the turbulent energy budget in the wake of freely oscillating elastically mounted cylinder at low reduced velocities

We present a numerical study of the turbulent kinetic energy budget in the wake of cylinders undergoing Vortex-Induced Vibration (VIV). We show three-dimensional Large Eddy Simulations (LES) of an elastically mounted circular cylinder in the synchronization regime at Reynolds number of Re=8000. The Immersed Boundary Method (IBM) is used to account for the presence of the cylinder. The flow field in the wake is decomposed using the triple decomposition splitting the flow variables in mean, coherent and stochastic components. The energy transfer between these scales of motions are then studied and the results of the free oscillation are compared to those of a forced oscillation. The turbulent kinetic energy budget shows that the maximum amplitude of VIV is defined by the ability of the mean flow to feed energy to the coherent structures in the wake. At amplitudes above this maximum amplitude, the energy of the coherent structures needs to be fed additionally by small scale, stochastic energy in form of backscatter to sustain its motion. Furthermore, we demonstrate that the maximum amplitude of the VIV is defined by the integral length scale of the turbulence in the wake

Chemiluminescence from the oxidation of urea and ammonia with hypobromite and N-bromosuccinimide

The spectral distribution for the chemiluminescent oxidation of ammonia with hypobromite is significantly different to that for the oxidation of ammonia with N-bromosuccinimide. Therefore, in contrast to the assumptions of several authors, the action of N-bromosuccinimide is not solely derived from the in situ formation of hypobromite. Neither the oxidation of urea with hypobromite nor the oxidation of urea with N-bromosuccinimide involves an initial hydrolysis of urea to ammonia in the alkaline solution. However, these two reactions lead to a common emitter. The addition of xanthene dyes, such as dichlorofluorescein, enhance the chemiluminescence intensity by energy transfer to the efficient fluorophore, but reaction between the sensitiser and hypobromite can result in a significant increase in the background signal. A list of potential interferences has been compiled; particular attention was paid to guanidino compounds, as the chemiluminescence accompanying the oxidation of this functional group has not been previously discussed.

Milk consumption, body composition and pre-weaning growth rates of Australian fur seal

Pre-weaning growth rates, body composition, milk consumption and mass gain efficiency were measured in Australian fur seal Arctocephalus pusillus doriferus pups born in two consecutive breeding periods. Australian fur seals have the highest birth mass of any fur seal species (male 8.3 kg; female 7.2 kg). While their absolute pre-weaning growth rate (male 62 g·day⁻¹; female 53 g·day⁻¹) is similar to that of other temperate latitude fur seals, they have the longest birth-mass doubling time of any otariid species (134–136 days). Daily milk consumption increased from 400 g·day−1 (5 MJ·day−1) after birth to 675 g·day⁻¹ (13.7 MJ·day⁻¹) at age 210 day. However, mean mass-specific milk consumption (41 g·kg⁻¹) is substantially lower than in other otariid species (58–70 g·kg⁻¹) and, combined with a low mass gain efficiency (0.12 g·g⁻¹), contributes to the low mass-specific growth rates observed. There were no significant differences in either absolute or mass-specific milk consumption between the sexes. Significant differences, however, were found between the sexes in the body composition of pups with females generally having larger body lipid stores than males for any given mass. Peak milk yield by Australian fur seal females is estimated at 0.60 MJkg−0.75, substantially less than in Antarctic fur seals. The low level of maternal energy transfer in Australian fur seals may reflect the relatively low marine productivity of their foraging areas.

Emitting species in chemiluminescence reactions with acidic potassium permanganate : a re-evaluation based on new spectroscopic evidence

The reaction of acidic potassium permanganate with a wide range of compounds is known to produce a broad red emission, and there is strong evidence for an excited manganese(II) emitting species. Nevertheless, numerous researchers have proposed other emitters for reactions with acidic potassium permanganate, particularly for systems where fluorescent compounds were present, either as enhancers or reaction products. We have examined many reactions of this type and found that, in most cases, the same red emission was produced. There were, however, some exceptions, including the oxidation of dihydralazine, certain thiols and sulphite (each in the presence of an enhancer).

The thermal stability and structural site-distribution of Eu3+ ions in the red-emitting phosphors Ca9Eu2W4O24 and Sr9Eu2W4O24

The red-emitting phosphors Ca₉Eu₂W₄O₂₄ and Sr₉Eu₂W₄O₂₄ were synthesized by the solid-state reaction method. The crystal phases were characterized by X-ray powder diffraction. The photoluminescence excitation and emission spectra were investigated. The luminescence excitation and emission spectra confirm that the phosphors are efficiently excited by near UV light. The dependence of luminescence intensities on the heating temperatures was investigated. The Ca₉Eu₂W₄O₂₄ phosphor exhibits higher thermal stability than that of Sr₉Eu₂W₄O₂₄. The crystallographic sites for Eu³⁺ ions in Ca₉Eu₂W₄O₂₄ and Sr₉Eu₂W₄O₂₄ are investigated by the site-selective excitation spectra in the ⁵D₀ → ⁷F₀ wavelength region. It is identified that the Eu³⁺ ions occupy only M sites (statistically occupied by 0.5Eu and 0.5Ca) in Ca₉Eu₂W₄O₂₄ and, however, the Eu³⁺ ions can substitute both M sites (Eu³⁺ + Sr²⁺) and Sr²⁺ sites in Sr₉Eu₂W₄O₂₄. The luminescence spectra and the thermal stability are discussed on the basis of the crystal structure, Eu³⁺ site-distributions and the energy transfer.

Developing a facility for glass façade performance testing

This research aims to investigate whether real spaces can support legitimate measurements on glazing energy and thermal comfort analysis. This paper presents the development of a research facility for doing this. It will test simple to complex glazing and shading systems in a real (occupied) interior office environment. The purpose of this research project is to compare measured results with those being simulated with existing software and to discover discrepancies between simulation and real measured results. What parameters characterize a glazing system, whether simple or complex? Can these parameters be used to predict the energy transfer and comfort in the space? One must begin with simple glazing systems and verify measured with readily known simulated results. It is, at present, very difficult to use geometric based software with thermal based software to predict the performance of complex glazing systems. However, if we can characterize glazing systems with a set of reliable measurements, we can provide the data necessary for predicting performance in a live space. Specifically, the Solar Heat Gain Coefficient (SHGC) is a variable parameter based upon solar incident angle to a glazing system and is intended to be measured in its integral components: solar transmittance and inward-flowing fraction (radiative/convective) heat gain. A new instrumental approach through variable surface coated heat flux meters is being investigated to provide the measurement of interior glazing surface radiative and convective heat gain. The results suggest that this instrumentation may support be a viable method of testing inward-flowing heat gains from the interior glass surface. The test set-up also considers the application of a well-known B&K 1221 Comfort Meter for determining thermal comfort responses in the ‘perimeter zone’ on the interior side of a façade. This work requires further investigation, but is intended to be used in conjunction with solar pyranometers measuring transmittance as well as the heat flux meter and surface temperature instrumentation.