A new way to nanostructure hydrogels : electrospun thermo-responsive islands-in-the-sea nanofibres

Islands-in-the-sea nanofibres are a very interesting system: one polymer (islands) is distributed in fibrillar domains within a second polymer (sea). This fibre geometry is often used in microfiber technologies to obtain very fine fibers, by removing the “sea” polymer. This geometry also allows to combine two polymers with very different properties. In this work this geometry is introduced applied to electrospun hydrogel nanofibers, in a novel fashion, and as a way to improve and stabilize the hydrogel nanofibers. Thermo-responsive islands-in-the-sea nanofibers are here produced by electrospinning solutions of a hydrogel-forming thermo-responsive polymer (crosslinked poly(N-isopropylacrylamide), PNIPAM) and a reinforcing polymer (polyetherketone cardo, PEK-c). The two polymers are thermodynamically incompatible in solution and phase separation takes place, which allows the instant formation of islands-in-the-sea nanofibers upon electrospinning. PNIPAM was then crosslinked post-spinning using an oligomeric silsesquioxane. The formed nanocomposite nanofibers showed intrinsic nanostructure, where the fibril-like PNIPAM domains are intimately adjacent to the strong PEK-c domains. Upon contacting with water, the hydrogel domains became instantly highly swollen, while the PEK-c domains did not. As a result, very wrinkly, swollen fibers were obtained, with increased capillary action, as demonstrated through confocal microscopy. The composite nanofibers in water showed excellent swelling ratios and very fast responses to temperature variations (of the order of 1 second) with morphological and optical effects: variations in fiber-diameter were accompanied by optical transitions: transparent-opaque. The produced hydrogel nanofibers also presented improved mechanical properties (even with small amounts of PEK-c), when compared to their crosslinked-PNIPAM-only nanofibers. It will be also shown how these materials can be used as optical actuators and smart hydrogel platforms with tuneable contact angle and morphology. In brief, this work aims to demonstrate a new platform technology which can be applied to several hydrogel systems, to achieve hydrogel-based composites with new and improved properties, while retaining (and improving) the main properties of the hydrogel. Here this was demonstrated by showing that the composite materials showed thermo-responsiveness, and enhanced transition kinetics.

Bacterial biosensors for measuring availability of environmental pollutants

Biosensors are projected to find many applications due to their high selectivity and sensitivity, rapid reaction, economy and ease of handling in field measurements. Even though biosensors for a wide range of environmental pollutants have been extensively reported in the literature, the decision to develop a suitable biosensing system that can be approved by a regulatory perspective for environmental applications is fraught with technical issues. These issues mainly concern the biological recognition element, the physico-chemical transducer and the interfaces between the biological and the physical components, but also aspects of fluidics, electronics, and software for data processing. This article focused on the development of microbial-based biosensors for environmental applications especially metal contaminants such as arsenic.

A tissue of denials: film retrospective (1979-2016)

My abstract moving image making has provided a foundation for my practice since I first started processing and solarizing my own 16mm film in one of those LOMO Russian processing tanks in 1973. Feyers, Zoomfilm (1976) and Running (1976) rework some of those early strips of black and white film. Whenever funding dried up I always fell back on my abstract direct on film work. It was cheap. Like knitting, it gave me a space to process the dilemmas and incongruities of daily life and to escape its clutches. I also began to understand that these forces were still there, embedded implicitly in the work. Now, more than ever, I understand this as a survival response to corporate doublespeak. I would never throw anything away. New scratching, painting, taping or bleaching strategies could be added later. Intensive cluster editing of single frames became an obsession. The translated difference between what you saw over a light-box and what was projected drew me in. Like the migrant position I was allocated from childhood I survived in the space between these two territories. As well as an archive of images and movement I collect optical effects. The flash frame. The trail of afterimages resulting from flickering between positive and negative images. At their liveliest these images float above the screen. Now the digital allows me to amplify the material presence of 16m and 35mm film and a whole new world opens up before me. I cobble together found footage films from my own archive of discarded data and unfinished sentences.

The effects of dye dopants on the conductivity and optical absorption properties of polypyrrole

Ten anionic compounds, including four acidic dyes, were used to dope polypyrrole powder. The effects of the dopants on density, optical absorption and conductivity of the polypyrroles were studied. The presence of the dopant in the conducting polymer matrix was verified by ATR-FTIR spectroscopy. Density function theory (DFT) simulation was used to understand the effect of the dopants on the solid structure, optical absorption and energy band structures. Anthraquinone-2-sulfonic acid-doped polypyrrole yielded the highest conductivity. The dye-doped polypyrrole showed an enhancement in its UV–vis optical absorption.

Efficient design of polarization insensitive polymer optical waveguide devices considering stress-induced effects

We present an approach for the efficient design of polarization insensitive polymeric optical waveguide devices considering stress-induced effects. In this approach, the stresses induced in the waveguide during the fabrication process are estimated first using a more realistic model in the finite element analysis. Then we determine the perturbations in the material refractive indices caused by the stress-optic effect. It is observed that the stresses cause non-uniform optical anisotropy in the waveguide materials, which is then incorporated in the modal analysis considering a multilayer structure of waveguide. The approach is exploited in the design of a Bragg grating on strip waveguide. Excellent agreement between calculated and published experimental results confirms the feasibility of our approach in the accurate design of polarization insensitive polymer waveguide devices.

Effects of approach velocity and foot-target characteristics on the visual regulation of step length

Two questions emerge from the literature concerning the perceptual-motor processes underlying the visual regulation of step length. The first concerns the effects of velocity on the onset of visual control (VCO), when visual regulation of step length begins during goal-directed locomotion. The second concerns the effects of different obstacles such as a target or raised surface on step length regulation. In two separate experiments, participants (Experiment 1 & 2: n=12, 6 female, 6 male) walked, jogged, or sprinted towards an obstacle along a 10 m walkway, consisting of two marker-strips with alternating black and white 0.50 m markings. Each experiment consisted of three targeting or obstacle tasks with the requirement to both negotiate and continue moving (run-through) through the target. Five trials were conducted for each task and approach speed, with trials block randomised between the six participants of each gender. One 50 Hz video camera panned and filmed each trial from an elevated position, adjacent to the walkway. Video footage was digitized to deduce the gait characteristics. Results for the targeting tasks indicate a linear relationship between approach velocity and accuracy of final foot placement (r=0.89). When foot placement was highly constrained by the obstacle step length shortened during the entire approach. VCO was found to occur at an earlier tau-margin for lower approach velocities for both experiments, indicating that the optical variable ‘tau' is affected by approach velocity. A three-phase kinematic profile was found for all tasks, except for the take-off board condition when sprinting. Further research is needed to determine whether this velocity affect on VCO is due to ‘whole-body' approach velocity or whether it is a function of the differences between gait modes.

Hydrodynamic flow focusing to study the isolated effects of the flow components

Biological fluids such as blood, proteins and DNA solutiosn moving within fluidic channels can potentially be exposed to high level of shear, extension or mixed stress, either in vitro such as industrial processing of blood products or in vivo such as ocurrs in some pathological conditions. This exposure to a high level of strain can trigger some reactions. In most of the cases the nature of the flow is mixed with shear and extensional components. The ability ot isolate the effects of each component is critical in order to understand the mechanisms behind the reactions and potentially prevent them. Applying hydrodynamic flow focusing, we present in this investigation the characterization of microchannels that allow study of the regions of high shear or high extension strain rate. Micro channels were fabricated in polydimethyl siloxane (PDMS)  using standard soft-lithography techniques with a photolithographically patterned mold. Characterization of the regions with high shear and high extension strain rate is presented. Computational Fluid Dynamics (CFD) simulations in three dimensions have been carried out to gain more detailed local flow information, and the results have been validated experimentally. A comparison between the numerical models and experiment and is presented. The advantages of microfluidic flow focusing in the study  of the effects of shear and extension strain rates for biological fluids are outlined.

New technologies to access lens-mediated effects of the cornea

Contact lenses can affect the cornea in a variety of ways. Corneal structure can be altered so that its thickness changes to involve the epithelium and the stroma. As a result, the curvature may be affected, but whether it is the front or the back surface that is affected depends on the type of lens used. If thickness increases sufficiently, corneal transparency may decrease. Contact lenses can also affect cellular structure of all layers of the cornea through mechanical trauma, hypoxia, or toxicity from solutions that are used in association with lenses. More serious complications, such as inflammation and infection, can arise. All these changes can be detected by clinicians using slitlamp biomicroscopes and keratometers if the changes are significant enough. Since the development of computers, optical instruments have become more sophisticated and have enabled the detection of subtle changes but have also facilitated more precise measurement of these conditions along with the ability to capture images of the alterations or defects. This article describes some of the newer techniques and, specifically, the application of optical coherence tomography, confocal microscopy, and esthesiometry.

Effects of fibre parameters on the ultraviolet protection of fibre assemblies

Ultraviolet (UV) radiation protection is becoming increasingly necessary for human health, and textiles play an important role. The interaction between UV light and textiles is a complex one, involving fibre, yarn and fabric parameters. In this study, an optical model is presented for examining the influences of fibre parameters on the UV protection offered by a bundle of fibres with a given mass. The effects of mean fibre diameter and fibre type on UV absorption were examined. The model was verified with results of UV–visible diffuse reflectance measurements on natural and synthetic fibres. When the mass of fibres was kept constant, within the measurement range in this study, a bundle of fibres with coarser fibres had a lower UV reflectance than that with finer ones. The model accurately predicted factors influencing UV protection, including fibre diameter, fibre transmittance, porosity and refractive index.

Effects of Nd on the microstructures, mechanical properties and in vitro corrosion behavior of cast Mg-1Mn-2Zn-xNd alloys

Effects of neodymium (Nd) on the microstructures, mechanical properties, in vitro corrosion behavior, and cytotoxicity of as-cast Mg- 1Mn-2Zn-xNd alloys (x = 0.5, 1.0, 1.5, mass%) have been investigated to assess whether Nd is an effective element to increase the strength and corrosion resistance of Mg alloys, and to evaluate whether those alloys are suitable for biomedical applications. The microstructures were examined by X-ray diffraction analysis and optical microscopy. The mechanical properties were determined from uniaxial tensile and compressive tests. The corrosion behavior was studied using electrochemical measurement and cytotoxicity was evaluated using osteoblast-like SaOS2 cell. The results indicate that all the cast Mg-1Mn-2Zn-xNd alloys are composed of both alpha phase of magnesium (Mg) and a compound of Mg7Zn3, and their grain sizes decrease with Nd content. Nd is not an effective element to improve the strength and corrosion resistance of cast Mg-Mn-Zn alloys. Increase of Nd content from 0.5 to 1.5 does not significantly change biocompatibility of alloys. The cast alloys exhibit much better corrosion resistance than pure Mg and good biocompatibility.