Carbon Nanotube – Reduced Graphene Oxide Composites for Thermal Energy Harvesting Applications

By controlling the SWNT-rGO electrode composition and thickness to attain the appropriate porosity and tortuosity, the electroactive surface area is maximized while rapid diffusion of the electrolyte through the electrode is maintained. This leads to an increase in exchange current density between the electrode and electrolyte which results in enhanced thermocell performance.

Study on LiFe1 − xSmxPO4/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe1 − xSmxPO4/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp2-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO4 Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.

Study on LiFe1 − xSm xPO4/C used as cathode materials for lithium-ion batteries with low Sm component

LiFe1 − xSmxPO4/C cathode materials were synthesized though a facile hydrothermal method. Compared with high-temperature solid-phase sintering, the method can allow for the fabrication of low Sm content (2 %), a scarce and expensive rare earth element, while the presence of an optimized carbon coating with large amount of sp²-type carbon sharply increases the material’s electrochemical performance. The high-rate dischargeability at 5 C, as well as the exchange current density, can be increased by 21 and 86 %, respectively, which were attributed to the fine size and the large cell parameter a/c as much. It should be pointed out that the a/c value will be increased for the LiFePO4 Sm-doped papered by both of the two methods, while the mechanism is different: The value c is increased for the front and the value a is decreased for the latter, respectively.

Patterns of use and exchange of genetic resources of the striped catfish Pangasianodon hypophthalmus (Sauvage 1878)

The present paper reviews the use and exchange of genetic resources of the migratory freshwater fish Pangasianodon hypophthalmus (Sauvage 1878) (the striped or sutchi catfish). This species is naturally distributed in the Mekong River and Chao Phraya River basins, and is cultured in several countries, but current production occurs predominantly in the Mekong Delta, Vietnam. Catfish aquaculture in Vietnam has evolved from extensive systems using wild-caught seed to an intensified farming system that is entirely dependent on hatchery-produced seed. Genetic improvement programmes on catfish have started in Vietnam, but are still in their infancy. Genetic studies have revealed several subpopulations of the species. Apart from selective breeding and the production of hybrids with closely related species, no other technologies have been applied to improve the performance of catfish. The use and exchange of P. hypophthalmus genetic resources have brought benefits to rural communities. Aquaculture development of catfish has evolved from being seen as an exploitation of natural resources to an activity that can reduce pressure on wild fish populations. Management of aquaculture stocks need to be rationalised to minimise the potential impacts it might cause to wild populations.

Simulated impacts of climate change on current farming locations of striped catfish (Pangasianodon hypophthalmus; Sauvage) in the Mekong Delta, Vietnam

In Vietnam, culturing striped catfish makes an important contribution to the Mekong Delta's economy. Water level rise during rainy season and salt intrusion during dry season affect the water exchange and quality for this culture. Sea level rise as a consequence of climate change will worsen these influences. In this study, water level rise and salt water intrusion for three sea level rise (SLR) scenarios (i.e., +30, +50, and +75 cm) were simulated. The results showed that at SLR +50, the 3-m-flood level would spread downstream and threaten farms located in AnGiang, DongThap and CanTho provinces. Rising salinity levels for SLR +75 would reduce the window appropriate for the culture in SocTrang and BenTre provinces, and in TienGiang's coastal districts. Next to increasing dikes to reduce the impacts, the most tenable and least disruptive option to the farming community would be to shift to a salinity tolerant strain of catfish.

Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

Salt and solvent permeations across ion-exchange membranes used in electro-dialysis are directly related to the membrane material structure and chemistry. Although primarily used for aqueous effluents desalination, electro-dialysis was recently shown to be a promising technology for industrial wastewater and co-solvent mixtures purification. The harsh working conditions imposed by these liquid effluents, including high suspended solids, require the development of more chemically and mechanically resistant membranes. In this study, commercial porous stainless steel media filters (240 μm thick) were used as a backbone to prepare hybrid ion-exchange membranes by casting ion-exchange materials within the porous metal structure. The surface of the metal reinforcements was modified by plasma treatment prior to sol-gel silane grafting to improve the interface between the metal and the ion-exchange resins. The morphology of novel hybrid materials and the interface between the metal fibers and the ion-exchange material have been characterized using techniques such as scanning electron microscopy and FTIR mapping. The thickness of the silane coating was found to lie between 1 and 2 μm while water contact angle tests performed on membrane surfaces and corrosion test behaviors revealed the formation of a thin passivating oxide layer on the material surfaces providing anchoring for the silane grafting and adequate surface energy for the proper incorporation of the ion-exchange material. The hybrid membranes desalination performance were then tested in a bench top electro-dialysis cell over a range of flow rate, current densities and salt concentration conditions to evaluate the ability of the novel hybrid materials to desalinate model streams. The performance of the hybrid membranes were benchmarked and critically compared against commercially available membranes (Selemion™). Although the salt transfer kinetics across the hybrid ion-exchange composite membranes were shown to be comparable to that of the commercial membranes, the low porosity of the stainless steel reinforcements, around 60%, was shown to impede absolute salt permeations. The hybrid ion-exchange membranes were however found to be competitive at low current density and low flow velocity desalination conditions.

Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

Salt and solvent permeations across ion-exchange membranes used in electro-dialysis are directly related to the membrane material structure and chemistry. Although primarily used for aqueous effluents desalination, electro-dialysis was recently shown to be a promising technology for industrial wastewater and co-solvent mixtures purification. The harsh working conditions imposed by these liquid effluents, including high suspended solids, require the development of more chemically and mechanically resistant membranes. In this study, commercial porous stainless steel media filters (240. μm thick) were used as a backbone to prepare hybrid ion-exchange membranes by casting ion-exchange materials within the porous metal structure. The surface of the metal reinforcements was modified by plasma treatment prior to sol-gel silane grafting to improve the interface between the metal and the ion-exchange resins. The morphology of novel hybrid materials and the interface between the metal fibers and the ion-exchange material have been characterized using techniques such as scanning electron microscopy and FTIR mapping. The thickness of the silane coating was found to lie between 1 and 2. μm while water contact angle tests performed on membrane surfaces and corrosion test behaviors revealed the formation of a thin passivating oxide layer on the material surfaces providing anchoring for the silane grafting and adequate surface energy for the proper incorporation of the ion-exchange material. The hybrid membranes desalination performance were then tested in a bench top electro-dialysis cell over a range of flow rate, current densities and salt concentration conditions to evaluate the ability of the novel hybrid materials to desalinate model streams. The performance of the hybrid membranes were benchmarked and critically compared against commercially available membranes (Selemion™). Although the salt transfer kinetics across the hybrid ion-exchange composite membranes were shown to be comparable to that of the commercial membranes, the low porosity of the stainless steel reinforcements, around 60%, was shown to impede absolute salt permeations. The hybrid ion-exchange membranes were however found to be competitive at low current density and low flow velocity desalination conditions.

The current status of greenhouse gas reporting by Chinese companies: a test of legitimacy theory

Purpose – The purpose of this paper is to investigate the factors driving greenhouse gas reporting by Chinese companies.
Design/methodology/approach – Content analysis of annual reports and corporate social responsibility (CSR) reports for the year 2010 of the top 100 A-share companies listed on Shanghai Stock Exchange was conducted to investigate the extent of greenhouse gas reporting. Multiple regression analysis was performed to determine the factors driving these companies’ greenhouse gas reporting.
Findings – It was found that most Chinese companies reported neutral and good news. The results also indicate larger companies operating in an industry which has higher level of carbon dioxide emissions tend to have higher levels of greenhouse gas disclosures, consistent with the expectation of legitimacy theory. However, profitability and overseas listing were not significantly related to greenhouse gas reporting. This is consistent with the findings of previous literature. Finally, contrary to expectations, state-owned companies report less greenhouse gas information than private companies.
Originality/value – The paper contributes towards theory development by testing legitimacy theory in the context of greenhouse gas reporting by Chinese companies and contributes to existing literature on greenhouse gas reporting by focussing on the large emerging economy of China. The practical contribution of the paper rests in the area of accounting practice. The results outline the dearth in greenhouse gas reporting by Chinese companies, suggesting there needs to be future development of accounting standards in this area.

China's "South-South" trade with Southeast Asia: unequal exchange and combined and uneven development

China’s unprecedented emergence as an economic and political power has created a new geopolitical economy for semi-industrialised and developing economies in Southeast Asia. This paper examines China’s trade relationships with Thailand and Indonesia using the concepts of uneven and combined development (UCD) and unequal exchange. The mass of surplus value obtained through China’s trade with the developed economies has flowed into the considerable expansion in China’s imports from developing countries since 2000. China has maintained a consistent trade deficit with the latter. While the developing countries concerned have benefitted from this set of relationships, the extent to which they have done so has been determined by national strategies. In countries like Thailand – where manufacturing capital and a significant working class has emerged – exports expanded on the basis of mutually advantageous technologically and skills intensive goods. These are produced with a similar organic composition of capital as in China. The result has been a further consolidation of the hegemony of manufacturing capital. Indonesia, however, has a political system and economy long dominated by resource exploitation linked fractions of capital. The result has been a surge in primary goods exports. The current commodity price cycle has meant these goods exchange at prices above their value. The current looming price correction, however, may have negative repercussions. In the meantime, the concentration in raw materials exports is helping to prevent the emergence of a circuit of productive capital in manufacturing. The evidence from these contrasting cases suggests that the degree to which developing economies can benefit from China’s own historically unparalleled combined development remains highly contingent on the strength of the combined development possibilities and efforts within these other national social formations. Above all, there is the degree to which manufacturing sectors of capital can obtain hegemony.

Corporate governance and corporate finance practices in a Kuwait Stock Exchange market listed firm: a survey to confront theory with practice

Purpose– This paper aims to explore the issue of corporate governance mechanisms by including the importance of stakeholders, primary objectives of the firm and the ownership of top financial managers of listed firms in Kuwait in the survey tool. It attempts to investigate whether theory aligns with the behaviour of financial managers in practice in an emerging market case.Design/methodology/approach– A survey was developed to focus primarily on the current corporate finance practices implemented by CFOs in listed companies in Kuwait. The target respondents are listed firms in the Kuwaiti Stock Exchange (KSE). The survey includes questions on topics that are closely related to capital budgeting, capital structure, cost of capital and dividend policy. For example, the survey asks the managers how they estimate their cost of equity (CAPM or other methods) and whether the impact of the weighted average cost of equity is taken into consideration in their capital structure choices.Findings– A surprising number of firms are now widely using IRR for decision making. CAPM is also in use, whereas WACC remains the most popular method used. There is some support for the “bird‐in‐hand” dividend theory in the tax‐free environment. Firms in Kuwait do not have any particular source of capital structure choices when it comes to how best to finance their projects as is the case in the US market. Firms in Kuwait are consciously striving for maximizing profits and those managers are regarded as their most important stakeholders. This may indicate the existence of agency problems.Research limitations/implications– The limitation of this study lies in the absence of empirical investigation on how corporate finance decisions may affect firms' performance in Kuwait. Hence, empirical validation will be performed by the authors in the next stage of this research, which will form the basis for further research. Empirical validation for the impact of corporate governance on performance is needed.Practical implications– This research may benefit managers and decision makers in many aspects, including having an understanding of applying popular and the most suitable corporate finance and corporate governance techniques in the management of their companies. In this research, the authors have identified the gap between practice and academia.Originality/value– To the best of the authors' knowledge, this is the first study to examine comprehensively major areas of financial policies and practices and corporate governance in an emerging market case, especially in the Middle East. Kuwait provides a unique institutional setting in its taxation system. Therefore, this study will make a contribution to the general literature in this field.

Effects of trunk-shaker harvester and ethephon on plant water status, leaf gas exchange, and yield of citrus cultivated under Mediterranean conditions

This work was aimed to study whether the application of ethephon as an abscission agent and mechanical harvest using a trunk shaker have any effect on plant water status, leaf gas exchange, and yield of mandarin and orange trees cultivated under Mediterranean conditions. The experiment was performed from 2008 to 2011 in five commercial orchards where parameters related to the plant water status and leaf gas exchange were measured before the application of ethephon, at harvest time and at different occasions after harvest. In addition, the effects of ethephon dose on yield in the current and subsequent seasons were also evaluated. Results showed that ethephon applications and mechanical harvest did not detrimentally affect plant water status in any of the cultivars studied. Furthermore, either had no effect or had a short temporal decrease effect on leaf gas exchange depending on the cultivar studied although with no consequences for the fruit yield obtained during the current season. Increasing ethephon doses led to fruit yield reductions in the mandarin ‘Orogrande’ trees in subsequent seasons. When trunk-shaker and ethephon applications were combined, however, yields from the late-maturing orange significantly decline in subsequent seasons. Overall, results show that using a trunk shaker is a viable technique to mechanically harvest citrus trees destined to both fresh and industry market and can be considered as an alternative to the traditional manual harvest usually performed under Mediterranean conditions. However, its use cannot be recommended for late-maturing oranges, such as the ‘Navel Lane Late’ in which mature fruit and fruitlets coexist in the tree at the time of harvest.