Evaluation of corrosion behaviour of biodegradable base oils using electrochemical techniques

© 2015 Institute of Materials, Minerals and Mining. Published by Maney on behalf of the Institute. This paper describes an interesting attempt to quantitatively evaluate the corrosion behaviour of base oils using a novel approach based on electrochemical techniques. The present study evaluates the corrosion behaviour of biodegradable base oils with and without additives in an aqueous chloride solution using electrochemical measurements. Potentiodynamic polarisation and electrochemical impedance spectroscopy techniques were used to quantitatively determine the corrosion behaviour of these oils, and the results were compared to the conventional immersion tests. Both these electrochemical measurements were carried out in a three-electrode system where AS1020 mild steel alloy was used as a working electrode in a purpose made pipette cell. The results obtained from the electrochemical measurements help to evaluate the best biodegradable base oil for formulating eco-friendly industrial lubricants.

From transcriptome to biological function: environmental stress in an ectothermic vertebrate, the coral reef fish Pomacentrus moluccensis

Background
Our understanding of the importance of transcriptional regulation for biological function is continuously improving. We still know, however, comparatively little about how environmentally induced stress affects gene expression in vertebrates, and the consistency of transcriptional stress responses to different types of environmental stress. In this study, we used a multi-stressor approach to identify components of a common stress response as well as components unique to different types of environmental stress. We exposed individuals of the coral reef fish Pomacentrus moluccensis to hypoxic, hyposmotic, cold and heat shock and measured the responses of approximately 16,000 genes in liver. We also compared winter and summer responses to heat shock to examine the capacity for such responses to vary with acclimation to different ambient temperatures.
Results
We identified a series of gene functions that were involved in all stress responses examined here, suggesting some common effects of stress on biological function. These common responses were achieved by the regulation of largely independent sets of genes; the responses of individual genes varied greatly across different stress types. In response to heat exposure over five days, a total of 324 gene loci were differentially expressed. Many heat-responsive genes had functions associated with protein turnover, metabolism, and the response to oxidative stress. We were also able to identify groups of co-regulated genes, the genes within which shared similar functions.
Conclusion
This is the first environmental genomic study to measure gene regulation in response to different environmental stressors in a natural population of a warm-adapted ectothermic vertebrate. We have shown that different types of environmental stress induce expression changes in genes with similar gene functions, but that the responses of individual genes vary between stress types. The functions of heat-responsive genes suggest that prolonged heat exposure leads to oxidative stress and protein damage, a challenge of the immune system, and the re-allocation of energy sources. This study hence offers insight into the effects of environmental stress on biological function and sheds light on the expected sensitivity of coral reef fishes to elevated temperatures in the future.

Natural and environmentally responsive building envelopes

In a context of global warming and our needs to reduce CO\d2 emissions, building envelopes will play an important role. A new imperative has been put forth to architects and engineers to develop innovative materials, components and systems, in order to make building envelopes adaptive and responsive to variable and extreme climate conditions. Envelopes serve multiple functions, from shielding the interior environment to collecting, storing and generating energy. Perhaps a more recent concern of terrestrial habitats is permeability and leakages within the building envelope. Such airtight and concealed envelopes with zero particle exchange are a necessity and already exist in regard to space capsules and habitats.

This paper attempts to acknowledge existing and visionary envelope concepts and their functioning in conjunction with maintaining a favorable interior environment. It introduces several criteria and requirements of advanced fa\acades along with interior pressurization control. Furthermore, the paper also takes a closer look at the principles of "biomimicry" of natural systems combined with the most up-to-date building materials and construction technologies, trying to integrate the notions of adaptation - where the capacity to survive depends on the ability to adjust to the environment - within the concept of technological evolution and innovation. An "adaptive" attitude in the way in which we conceive our built structures provides a conceptual basis for the advanced building design of our future, as well as one concerned about the efficient management of the available resources. Built environments of the future (in extreme climates or not) will need to respond to Renewable, Adaptive, Recyclable and Environmental (R.A.R.E.) concepts in order to coexist in a sustainable way with their surroundings.

Review of the green consumers' perception formation about the environmentally safe products

This study examines the influence of various factors on the green purchase intention of customers in Australia. A conceptual model has been proposed and was subjected to empirical verification with the use of a survey of metropolitan and regional households in Victoria. The results indicate that corporate perception with respect of companies not placing higher priority on reducing pollution than increasing profitability was the significant predictor of customers’ negative overall perception toward environmentally safe products. The only positive contribution to customers’ perceptions was their past experience with the product. Other factors including the perception of environmentally safe products, product labels, and regulatory protection did not appear to influence customers’ perceptions. The results also suggest that customers are not tolerant of lower quality and higher prices of environmentally safe products. The present findings provide an understanding of the antecedents of green purchasing and highlight that green customers rely more on personal experience with the product rather than the information provided by the marketer.

Environmentally sustainable food production and marketing : opportunity or hype?

Purpose: Identify and analyse the beliefs of value-chain intermediaries regarding the production and marketing of food products conforming to environmentally sustainable standards.

Methodology: In-depth, semi-structured, face-to-face interviews with senior managers of food companies across the value chain.

Findings: In Australia, the demand for foods that are produced under environmentally sustainable standards has been slow to take-off because (a) customers do not perceive these products as offering any special benefits (b) customers distrust the claims made by organisations (c) these products are much more expensive than traditional products, and (d) the implementation of environmental standards is expensive. Customers claim that the use of different terminologies such as organic, green and environmentally friendly in promoting
food products is confusing.

Research Limitations: Findings are not generalisable because the study is based on a small sample.

Practical Implications: Value-chain intermediaries are unlikely to voluntarily adopt environmental standards because of low demand for such foods and the high costs of adopting and monitoring environmentally sustainable production and marketing regimes.

Surface analysis of environmentally exposed painted composites manufactured from Quickstep and autoclave processes

The surface finishes of laminates produced by Quickstep™ and autoclave processes for use in automotive outer skin panels were compared. Automotive quality, painted carbon fibre samples, manufactured via both processes, were exposed to typical exposure environments including combinations of temperature (70, 120, 170°C), UV-B, humidity (95% RH) and immersion in water.

The microscopy and surface roughness results demonstrated that the surfaces produced by the Quickstep process were less susceptible to damage in the aging environments than the surfaces of the autoclaved samples. Quickstep samples displayed surface bubbling of only 5 μm, compared to the autoclaved surface bubbles which reached a diameter of 30 mm before bursting, with complete delamination occurring between the paint and the composite. The surface roughness measurements revealed the autoclave samples (Ra = 0.72 μm) were up to three times the roughness of the Quickstep samples (Ra = 0.23 μm).

Power ultrasound offers an environmentally friendly approach to cleaning dairy UF membranes

Flat sheet polymeric UF membranes of 30000 MWCO were obtained from Millipore Inc. Polypropylene spacers of a 50 mil (1.3 mm) thickness were obtained from KOCH membrane systems. A single 30 cm^sup 2^ membrane sheet was sandwiched with a spacer on the feed side of a cross flow Minitan S unit (Millipore Inc). The unit was immersed in a 50 kHz ultrasonic bath that was switched on as required. All experiments used re-constituted spray-dried whey powder to foul the membrane.

Evaluating lubricants in sheet metal forming

The sheet metal forming process basically involves the shaping of sheet metal of various thickness and material properties into the desired contours. This metal forming process has been extensively used by the automotive industry to manufacture both car panels and parts. Over the years numerous investigations have been conducted on various aspects of the manufacturing process with varied success. In recent years the requirements on the sheet metal forming industry have headed towards improved stability in the forming process while lowering environmental burdens. Therefore the overall aim of this research was to identify a technique for developing lubricant formulations that are insensitive to the sheet metal forming process. Due to the expense of running experiments on production presses and to improve time efficiency of the process the evaluation procedure was required to be performed in a laboratory. Preliminary investigations in the friction/lubricant system identified several laboratory tests capable of measuring lubricant performance and their interaction with process variables. However, little was found on the correlation between laboratory tests and production performance of lubricants. Therefore the focus of the research switched to identifying links between the performance of lubricants in a production environment and laboratory tests. To reduce the influence of external parameters all significant process variables were identified and included in the correlation study to ensure that lubricant formulations could be desensitised to all significant variables. The significant process variables were found to be sensitive to die position, for instance: contact pressure, blank coating of the strips and surface roughness of the dies were found significant for the flat areas of the die while no variables affected friction when polished drawbeads were used. The next phase was to identify the interaction between the significant variables and the main lubricant ingredient groups. Only the fatty material ingredient group (responsible for the formation of boundary lubricant regimes) was found to significantly influence friction with no interaction between the ingredient groups. The influence of varying this ingredient group was then investigated in a production part and compared to laboratory results. The correlation between production performance and laboratory tests was found to be test dependant. With both the Flat Face Friction test and the Drawbead Simulator unaffected by changes in the lubricant formulation, while the Flat Bottom Cup test showing similar results as the production trial. It is believed that the lack of correlation between the friction tests and the production performance of the lubricant is due to the absence of bulk plastic deformation of the strip. For this reason the Ohio State University (OSU) friction test was incorporated in the lubricant evaluation procedure along with a Flat Bottom Cup test. Finally, it is strongly believed that if the lubricant evaluation procedure highlighted in this research is followed then lubricant formulations can be developed confidently in the laboratory.

Natriuretic peptides : do they regulate water balance in desert-adapted rodents?

This research determined how the natriuretic peptide system, which controls water and salt balance, responds to water limitation in a desert rodent. It was found that a uniform down-regulation of the system is not part of the physiological response to minimise water loss during periods of low water availability.

Malaysia's terraced housing : towards an environmentally sustainable future

Housing developers in Malaysia have been focusing on providing more homes to deal with the ever growing urban population, and have failed to address environmental issues which run parallel to these housing developments. The thesis identifies and suggests possible actions enabling future housing developments to incorporate sustainable elements.

Optimisation and analysis of three polymerase chain reaction (PCR) systems for the detection of environmentally significant microorganisms

Conventional assessments of water quality are based on the determination of bacterial indicator numbers. The detection of an indicator organism only provides presumptive evidence of the presence of harmful organisms By using polymerase chain reaction (PCR) to monitor water quality, indicators and pathogenic organisms can be specifically detected with a high sensitivity. The research illustrates the importance of optimisation and the maintenance of reaction efficiency in the accuracy and precision of the PCR.

Evaluation of cold forming lubricants for fastener manufacturing

Investigates the significance and interactive effects of lubricant type, workpiece surface texture and deformation rate under bulk metal, deformation conditions. A novel test rig was developed in conjunction with statistical test techniques. The result of this work identified a cold forming lubrication system with potential economic and environmental advantages over traditional lubrication systems.