Photochromic wool fabrics with enhanced durability and photochromic performance

In our previous work, we have produced a photochromic wool fabric by applying a thin layer of hybrid silica-photochromic dye onto the wool surface. The coating showed a very fast optical response, but had little influence on the fabric handle, however durability was low. In this context, we reported that durability of the hybrid layer can be improved by introducing epoxy groups into the silica matrix via co-hydrolysis and co-condensation of an alkyl trialkoxysilane (ATAS) and 3-glycidoxypropyltrimethoxysilane (GPTMS). The presence of epoxy groups in the silica enhanced both washing and abrasion durabilities. Also, the optical response speed was slightly increased as well. Effects of the type of alkyl silane and the GPTMS:alkyl silane ratio on the coating durability, fabric handle and optical response were examined.

Superhydrophobic fabrics from hybrid silica sol-gel coatings: Structural effect of precursors on wettability and washing durability

Particle-containing silica sol was synthesized by co-hydrolysis and co-condensation of two silane precursors, tetraethylorthosilicate (TEOS) and an organic silane composed of a non-hydrolyzable functional group (e.g., alkyl, flourinated alkyl, and phenyl), and used to produce superhydrophobic coatings on fabrics. it has been revealed that the non-hydrolyzable functional groups in the organic silanes have a considerable influence on the fabric surface wettability. When the functional group was long chain alkyl (C16), phenyl, or flourinated alkyl (C8), the treated surfaces were highly superhydrophobic with a water contact angle (CA) greater than 170°, and the CA value was little affected by the fabric type. The washing durability of the superhydrophobic coating was improved by introducing the third silane containg epoxide group, 3-glycidoxypropyltrimethoxsilane (GPTMS), for synthesis. Although the presence of epoxide groups in the coating slightly reduced the fabrics' superhydrophobicity, the washing durability was considerably improved when polyester and cotton fabrics were used as substrates.

Photostability and durability properties of photochromic organosilica coating on fabric

Photochromic fabrics were prepared by a dip-coating method using a silica sol-gel solution containing photochromic dyes. The coated fabric showed a rapid photochromic response. Three methods; incorporating a UV stabilizer in the coating layer, hydrophobic treatment of the porous surface, and covering the coating layer with an additional silica layer; were used to improve the photostability and durability. All three treatments improved the photostability without noticeably changing the photochromic response/fading speeds. Most of the treatments reduced the washing and abrasion durability. The extra coating layer increased the fabric rigidity.

Self-cleaning, superhydrophobic cotton fabrics with excellent washing durability, solvent resistance and chemical stability prepared from an SU-8 derived surface coating

Superhydrophobic cotton fabrics with a very low contact angle hysteresis were prepared using a single-pot coating solution comprising SU-8 (a negative photoresist), a fluorinated alkyl silane and silica nanoparticles. The fabric was treated using a dip-coating technique and subsequently cured under UV light. The coated fabric showed excellent superhydrophobicity with a water contact angle as high as 163° and a sliding angle as low as 2°. The coating was durable enough to withstand 100 laundry cycles. It also had excellent stability against long immersion times in organic solvents, and acid and base solutions.

Photochromic fabrics with improved durability and photochromic performance

Previously, we have reported a method for producing photochromic wool fabric by applying a thin layer of hybrid silica-photochromic dye onto the wool surface. While the photochromic coating showed a very fast optical response and had little influence on the fabric handle, its durability was poor. In this study, the durability of the photochromic coating layer was improved by introducing epoxy groups into the silica matrix via co-hydrolysis and co-condensation of an alkyl trialkoxysilane compound (ATAS) and 3-glycidoxypropyltrimethoxysilane (GPTMS). The presence of epoxy groups in the silica enhanced both washing and abrasion durability or fastness. In addition, the optical response speed was slightly increased as well. Effects of the type of alkyl silane and the GPTMS/alkyl silane ratio on the coating durability, fabric handle and optical response were examined.

Durability in concrete : new instruments : new opportunities

New infrastructure, particularly in the developing countries, demands substantial capital investment and a loss of durability of the concrete means a waste of oportunity. Improving durability of concrete structures is a non-trivial task. The durability of concrete has been related to its ability to resist the transport of water and the potentail imporvements to concrete durability using supplementary cementitious materials (SCM) has been well documented. With access to neutron and synchrotron facilities it has become possible to; (a) measure the ability of SCM to inhibit transport of water in concrete (b) measure particle size increase of hydrating cements (with and without SCM) by ultra-small angle neutron scattering (c) use neutron tomography combined with x-ray tomography to determine the three dimensional flaws in the structure of concretes that enable water ingress into structures, and (d) determine the amount of curing or degree of hydration on the durability of SCM/OPC blends. This review will detail preliminary results on cement and concrete obtained using the newly available neutron, synchrotron and other facilities in Australia and Brazil and highlights their ability to estimate factors which determine the service life of concrete

Exceptional durability enhancement of PA/PBI based polymer electrolyte membrane fuel cells for high temperature operation at 200°C

The incorporation of phosphotungstic acid functionalized mesoporous silica in phosphoric acid doped polybenzimidazole (PA/PBI) substantially enhances the durability of PA/PBI based polymer electrolyte membrane fuel cells for high temperature operation at 200°C.

Improvement of coating durability, interfacial adhesion and compressive strength of UHMWPE fiber/epoxy composites through plasma pre-treatment and polypyrrole coating

Ultra-high-molecular-weight polyethylene (UHMWPE) fibers have exceptionally higher specific strength and stiffness compared with other high-performance fibers. However, the interfacial adhesion and compressive performance of UHMWPE fiber-reinforced polymer composites (FPCs) are extremely low. The challenges are to achieve load transfer at the interface between the fiber and matrix at a molecular level. Here, we show that plasma pre-treatment of UHMWPE fibers followed by coating with polypyrrole (PPy) results in an 848% improvement in the interfacial adhesion and 54% enhancement in compressive performance. This method takes advantage of a toughening mechanism observed in spider silk and collagen, which the hydrogen bond power the load transfer. The results showed that these improvements of interfacial adhesion and compressive strength were attributed to hydrogen-bonding interactions between the plasma pre-treated UHMWPE and PPy, which improves the fiber-matrix-fiber load transfer process. In addition, the hydrogen-bonded PPy coatings also endowed durability electrical conductivity properties of the UHMWPE fiber.

Ethical performance evaluation (EPE) in business practices: framework and case illustrations

Purpose – A set of principal parameters (i.e. time, context, gap, outcome, and consequence) influences the ethical performance evaluation (EPE) of business practices in the marketplace and society. The purpose of this paper is to describe a managerial framework of EPE based upon these parameters.

Design/methodology/approach – Case illustrations are used to underpin the introduced managerial framework of EPE.

Findings – The EPE of business practices is not only dependent upon the ethical values and principles of today, but those principles of tomorrow may be equally, or even more, crucial. The EPE of business practices is also dependent upon the surrounding context and its specific ethical values and principles. Furthermore, it is dependent upon the gap between different perceptions of ethical values and principles and if the outcome of the corporation's ethical values and principles are proactive or reactive in relation to the reigning ethical values and principles in the marketplace and society. Finally, it is also dependent upon the potential and eventual consequences of ethical values and principles.

Research limitations/implications – The only way that we can “objectively” evaluate past ethical values and principles is through the use of ethical values and principles at the time and in respect to the context at hand. Research tends to fail when considering the longitudinal and evolutionary dimensions in the exploration of ethical values and principles in business practices. There is too much focus upon on-the-spot-accounts in the past and in current research efforts. An important area for further research is how to deal with the durability and variability of ethical values and principles in business practices in the marketplace and society. The key may be a stronger emphasis on longitudinal research efforts that may explore them over time and as contexts evolve. Ethical values and principles are connected and re-connected over time and across contexts in one way or another. They have a past, a current status and a future.

Practical implications – The decision as to whether business practices are ethical or unethical is – relatively speaking – easy to determine from a narrow perspective, however, the decision whether business practices are ethical or unethical becomes complicated as the perspective is widened and deepened. An introduced managerial framework of EPE provides a generic foundation and structure to examine the acceptability versus unacceptability of business practices.

Originality/value – The paper introduces a managerial framework of EPE, followed by case illustrations. It addresses the impact of time on ethical values and principles in any context on the potential and eventual gaps, outcomes and consequences in business practices. The managerial framework of EPE may also be used in non-business areas whenever found applicable and convenient to use.

Socio-technical factors influencing channel use for knowledge-sharing in regional SME networks

The economic sustainability of regional areas is dependent on cross-industry innovation and knowledge-sharing among Small and Medium Enterprises (SMEs). The web-based initiatives deployed in regions worldwide to facilitate SME knowledge-sharing have typically been unsuccessful. This paper argues that the main reason for these failures is the lack of understanding of the socio-technical factors which influence the use of web-based channels (websites, online forums and expertise databases) as well as the more conventional channels (face-to-face and e-mail). This paper reports the findings of interpretive case studies of two regional SME business networks. It evaluates the major channels on six socio-technical criteria: link strength; trustworthiness; tacitness; usability; durability and currency. None of the channels were strong against all socio-technical factors. This highlights the importance of achieving an appropriate mix of channels to facilitate SME knowledge-sharing.

Current developments and future challenges for the creation of aortic heart valve

The concept of tissue-engineered heart valves offers an alternative to current heart valve replacements that is capable of addressing shortcomings such as life-long administration of anticoagulants, inadequate durability, and inability to grow. Since tissue engineering is a multifaceted area, studies conducted have focused on different aspects such as hemodynamics, cellular interactions and mechanisms, scaffold designs, and mechanical characteristics in the form of both in vitro and in vivo investigations. This review concentrates on the advancements of scaffold materials and manufacturing processes, and on cell–scaffold interactions. Aside from the commonly used materials, polyglycolic acid and polylactic acid, novel polymers such as hydrogels and trimethylene carbonate-based polymers are being developed to simulate the natural mechanical characteristics of heart valves. Electrospinning has been examined as a new manufacturing technique that has the potential to facilitate tissue formation via increased surface area. The type of cells utilized for seeding onto the scaffolds is another factor to take into consideration; currently, stem cells are of great interest because of their potential to differentiate into various types of cells. Although extensive studies have been conducted, the creation of a fully functional heart valve that is clinically applicable still requires further investigation due to the complexity and intricacies of the heart valve.

Developing a stakeholder analysis to aid bio-based product innovation

Purpose – The results which that study seeks to report are the first part of a larger research programme funded by the New Zealand Foundation for Research, Science & Technology (FRST) aimed at gaining a better understanding of stakeholder perceptions in relation to bio-based products.

Design/methodology/approach – Utilising three chemically modified wood products, data were collected from focus groups and questionnaires and centred primarily on perceptions surrounding the acceptability of building materials that have been bio-modified. Irrespective of the type of chemical modification, family health and durability were the most important factors identified.

Findings – The study finds that product cost rated lower in the 16 factors evaluated, and energy used in production was of little concern. When comparing the three products to one another, two distinct groups with quite differing purchasing philosophies were identified and these perspectives significantly influenced perceptions of product acceptability and willingness to purchase. Utilising a paired comparison technique, an investigation of trade-offs indicated preference for performance over cost and product familiarity. Similarly, low chemical emissions were also preferred over cost considerations. Among the findings, there was scepticism regarding trust in manufacturers to adequately safeguard health and safety and to have a minimum impact on the environment. Low levels of trust were expressed in regard to manufacturers' concern for future generations.

Originality/value – The paper develops an investigative framework which could be applied to the evaluation of products arising from bio-material technology innovation and recommendations for future research directions.