‘Stanley Schupak doesn’t live here anymore’: un/becoming transsexual and coming home in Duncan Tucker’s Transamerica

This article analyses the representation of male-to-female transsexuality as represented in Duncan Tucker's film Transamerica (2005). Using a combination of transgender theory and textual analysis this article argues that there is a normativising agenda in this film that makes transsexuality pallatable for non-transgender (or cisgender) audiences by aligning it with idealised (and conservative) conventions in Western culture for women, those of motherhood, heterosexuality, and family-centricity.

Workplace "bargaining" and the wages/working time nexus: counting the cost of decentralisation

The impact of deregulation on dispersion of earnings in Victoria has been
acknowledged in the findings of the recent task force enquiry into industrial relations in Victoria. This paper argues that the link between hours worked and rates of pay has played a significant role in this increased dispersion. Drawing upon detailed analysis of hours and wages in Victorian agreements, data is presented on declining take-home pay flowing from the loss of penalty rates. This, we argue, is attributable to
the lack of substantive and procedural protections available to Victorian workers under schedule 1A of the Workplace Relations Act, and formerly under the Victorian Employee Relations Act, 1992. We contrast these findings with collective agreements trading off penalty rates certified by the Australian Industrial Relations Commission, and Australian Workplace Agreements approved by the Office of the Employment
Advocate. We conclude by suggesting there is a scale of fair outcomes attached to the wages/hours trade-off, directly attributable to the various institutional mechanisms now influencing Australian wage determination.

Effect of membrane stress on surface roughness changes in sheet forming

Friction plays an important role in sheet metal forming (SMF) and the roughness of the surface of the sheet is a major factor that influences friction. In finite element method (FEM) models of metal forming, the roughness has usually been assumed to be constant; even though it is commonly observed that sheet drawn under tension over a tool radius results in the surface becoming shiny, indicating a major change in surface morphology. An elastic–plastic FEM model for micro-contact between a flat surface and a single roughness peak has been developed. The model was used to investigate the effect of the membrane stress in the sheet on the deformation of an artificial roughness peak. From the simulation results, the change in asperity, or deformation of the local peak, for a given nominal tool contact stress is significantly influenced by the local substrate stress. The height of the asperity decreases with increasing substrate stress and the local pressure is much higher than the nominal pressure. In addition, the local contact stress decreases with an increase in the substrate stress levels.

Monitoring the total phenolic/antioxidant levels in wine using flow injection anaylsis with acidic potassium permanganate chemiluminescence detection

Flow injection methodology is described for the estimation of the total phenolic content of wine using acidic potassium permanganate chemiluminescence detection. Selected simple phenolic compounds including quercetin, rutin, catechin, epicatechin, ferulic acid, caffeic acid, gallic acid, 4-hydroxycinnamic acid and vanillin elicited analytically useful chemiluminescence with detection limits ranging between 4×10⁻¹⁰ and 7×10⁻⁷ M. A comparison between the chemiluminescence methodology and other total phenol/antioxidant assays, used by the food and beverage industry, resulted in a good correlation. The chemiluminescence detection was found to be selective with minimal interferences being observed from the non-phenolic components in wine. Analysis of 12 different wines showed that the chemiluminescence method was a rapid way to estimate their antioxidant or total phenolic content.

Family law in Australia: re Patrick and the matter of Child A

In Re Patrick, Guest J of the Family Court of Australia dealt with the issue of whether a gay sperm donor, known to the lesbian mother of the child, had a right under Australian law to regular contact with the child. Justice Guest held that the sperm donor was allowed contact with the child to the extent that this was in the child's best interests. His Honour did, however, find that due to the way in which particular provisions of Australia's Family Law Act 1975 (Cth) are drafted, a sperm donor cannot be regarded as the 'parent' of the child, and accordingly called for legislative reform to recognise the rights of known sperm donors wanting involvement with the child. In this article, we discuss the matter of Re Patrick, comparing it with the strikingly similar matter of Pursuer Against Defender in the Case of Child A, decided recently by Sheriff Laura Duncan in the Glasgow Sheriff Court. We will then outline a proposal to amend the Family Law Act 1975 so that sperm donors can apply for an order to be a 'parent' for the purposes of the law, and therefore have the same rights and responsibilities as any other parent. In response to the tragic ending to the matter of Re Patrick, we conclude by stressing the need for an educational programme to be established, so that lesbian women who are considering parenthood may do so in the knowledge that the sperm donor does have the status of 'father', and in some jurisdictions 'parent', rather than merely being a 'donor'.

Rosencrantz and Guildenstern are nevertheless dead: the hypothetical adolescence of Prince Hamlet and the contested remorselessness of young offenders

A young man stabs a defenceless elderly man to death, and remarks “I’ll lug the guts into the neighbour room.” Martha Grace Duncan has argued that such apparent remorselessness and other forensic features must be interpreted differently in children and young people as compared to adult defendants, because of developmental effects. Professor Duncan discusses a range of fictional as well as real examples in pressing her claim, and also appeals to psychiatric, psychological and psychoanalytic expertise. In order to examine the general validity of her argument, it is hypothesised here that a Duncanian adolescence defense has been presented for Prince Hamlet who, miraculously revived, now stands his trial for murder. It is argued that the “adolescence defense” is unsound in principle and that children and youth (whether or not as superannuated as the Prince of Denmark) should be treated in the same forensic manner as adults. If we respect children and youth, we must respect their autonomy however uncomfortable for us this may be: “So young, my lord, and true.”

Elastic bending of steel-polymer-steel (SPS) laminates to a constant curvature

The shear strain of the interlayer in the elastic regime for a Steel-Polymer-Steel (SPS) laminate material has been studied during bending to a constant curvature. An analytical model is developed and the influence of process parameters are analyzed. The tension in the cover sheets is also determined and, finally, a moment diagram is calculated. The results show that the moment in the SPS laminate is nonuniform along the bent strip even though the curvature is constant because of the tension and compression forces introduced in the cover sheets by the shear reaction force of the interlayer material.

Robust control applied to metal spraying for rapid tooling

The spray forming process is a novel method of rapidly manufacturing tools and dies for stamping and injection operations. The process sprays molten tool steel from a set of arc spray guns onto a ceramic former to build up a thick steel shell. The volumetric contraction that occurs as the steel cools is offset by a volumetric expansion taking place within the sprayed steel, which allows the dimensional accurate tools to be produced. To ensure that the required phase transformation takes place, the temperature of the steel is regulated during spraying. The sprayed metal acts both as a source of mass and a source of heat and by adjusting the rate at which metal is sprayed; the surface temperature profile over the surface of the steel can be controlled. The temperature profile is measured using a thermal imaging camera and regulated by adjusting the rate at which the guns spray the steel. Because the temperature is regulated by adjusting the feed rate to an actuator that is moving over the surface, this is an example of mobile control, which is a class of distributed parameter control. The dynamic system has been controlled using a PI controller before. The paper describes the application of H∞ tracking type controller as the desire was for the average temperature to follow a desired profile. A study on the controllability of the underlying system was aimed at.

The dancer, the choreographer and modern dance scholarship: a critical reading

This paper undertakes a critical re-examination of the ways in which dance-making relationships between the dancer and the choreographer in American modern dance have been conceptualised in dance discourses. The essay proposes that a defining aspect of modern dance practices (from the moment that, after Duncan and Fuller, it became a group as well as a solo form) was the dancing together of the choreographer and the dancer(s) as the central mode of dance creation and transmission. In dance discourses, however, this dancing relationship is frequently not acknowledged. Texts by dance scholars Susan Leigh Foster, Amy Koritz and Randy Martin which draw on theoretical frameworks from outside dance are analysed in terms of the ways the theoretical frameworks that underpin them both make it possible to raise the question of the nature of the dance-making relationship while at the same time can also make the dancer's and the choreographer's dancing together invisible or unrepresentable. The analysis shows how scholarly discourses and the theoretical frameworks upon which they are built are already invested in regimes of intelligibility and visibility which have consequences for the representation of modern dance. This analysis forms the basis for proposing the need for a non-individualised, inter-subjective and intercorporeal understanding of the dancer and the choreographer and their relationship in modern dance.

What makes continuing education effective : perspectives of community pharmacists

Objective To explore how different aspects of the professional environment for Australian community pharmacists are perceived to be influencing the effectiveness of continuing education models in improving practice.

Setting Australian community pharmacy.

Methods A convenience sample of practising community pharmacists (n = 15) was recruited using the 'snowballing' technique to participate in one of four focus group teleconferences. Each focus group examined continuing education experiences from different professional perspectives and training needs (recent graduates, experienced practitioners, specialist practitioners and rural/remote practitioners).

Key findings Facilitation of professional development by accreditation bodies, and new challenges resulting from the introduction of cognitive services were seen to promote a favourable environment for continuing education engagement. Complex continuing education delivery models combined with high costs and excessive workloads made it more difficult to engage with continuing education systems or try to apply knowledge to the workplace.

Conclusion Results support findings from previous research that practice development requires a multifaceted approach with continuing education as just one component. Affordable and integrated models of continuing education are required in order to optimise efficacy for participants.

Barriers to pharmacist participation in continuing education in Australia

Background: The pharmacy profession recognises of the need for continuing education (CE), however, the rate of participation in organised CE remains low. Little is known about the reasons for low participation rates in CE, particularly in the Australian context. Aim: This research aimed to identify the barriers to participation of Australian pharmacists in CE. Method: Focus groups were held with Australian community pharmacists, grouped into experienced pharmacists, recently qualified pharmacists, pharmacists with specialist-training needs, and pharmacists practising in rural or remote areas. Focus group transcripts were thematically analysed. Results: Barriers identified by pharmacists included time constraints, accessibility - in terms of travel and cost, relevance, motivation, quality and method of CE delivery. Participants provided ideas to improve uptake of CE. Conclusion: The major barriers identified were time, accessibility and relevance of content. To improve uptake of CE a wider variety of flexibly delivered programs supplemented with in-depth workshops could be utilised.

Parents with psychosis : a pilot study examining self-report measures related to family functioning

The aims of this study were to examine the utility of various self-report instruments related to family functioning in families where a parent has a psychotic disorder, and to explore associations between these instruments and symptoms in the parent. Twenty-one parents with a psychotic disorders participated in the study. All participants were able to complete the questionnaires and the majority of parents reported levels of parental competence in the average range. Most parents (90%) perceived themselves to be effective parents, however 30% reported low levels of satisfaction with the parenting role. There were significant associations between objective measures of negative symptoms and self-report scores related to problems in ways of coping, and problems with parent-child interactions. Many individuals with psychosis were able to report areas of perceived need related to their role as parents and to the functioning of their families, however there are several limitations in the use of these instruments in this setting.

The primary health professional education : current models and barriers to participation

Introduction
Continuing Education (CE) for health professionals is a life-long process which endeavours to update or enhance knowledge, refine skills, reinforce professional values and support the delivery of professional practice. It plays a pivotal role in the maintenance of professional competence and in the past decade participation in CE has become an expectation of, rather than an option for, practising health professionals. The time and resources required from organisers and participants in
CE and the need to ensure practical outcomes justifies a review of current models being used for its delivery. This entails an understanding of the purpose of CE, a consideration of how it should be delivered, and the role played by assessment in achieving the goals of CE.
Aim of Report
The overall aim of this study is to identify important considerations and subsequently make recommendations for the development of an ideal model(s) of CE for community pharmacy.
Goals of Report
1. Define CE and its role.
2. Identify and assess current CE delivery models.
3. Examine the current status of continuing education and registration requirements for pharmacists.
4. Identify barriers to participation in CE.
5. Identify components and considerations for developing a model of CE delivery.
Methods
The following methods were employed for this project:
1. Literature review
A number of electronic databases were systematically searched in order to profile current trends and concepts in CE. CE structures currently in use were investigated by directly accessing the websites of appropriate associations.
2. Stakeholder interviews
A series of semi-structured interviews were completed with stakeholders from CE delivery organisations across a range of professions including pharmacy.
3. Community pharmacy focus groups
A series of focus group teleconferences were held with groups of pharmacists thought to have distinct CE needs: experienced pharmacists (qualified more than 5 years), recently-qualified pharmacists (5 years or less), rural/remote pharmacists, and pharmacists with specialist training
needs (such as Home Medication Reviews). These focus groups asked about participants’ experiences and opinions in relation to many aspects of CE including its delivery and its assessment.