Transmission electron microscopy characterization of the bake-hardening behavior of transformation-induced plasticity and dual-phase steels

The effect of prestraining (PS) and bake hardening (BH) on the microstructures and mechanical properties has been studied in transformation-induced plasticity (TRIP) and dual-phase (DP) steels after intercritical annealing. The DP steel showed an increase in the yield strength and the appearance of the upper and lower yield points after a single BH treatment as compared with the as-received condition, whereas the mechanical properties of the TRIP steel remained unchanged. This difference appears to be because of the formation of plastic deformation zones with high dislocation density around the “as-quenched” martensite in the DP steel, which allowed carbon to pin these dislocations, which, in turn, increased the yield strength. It was found for both steels that the BH behavior depends on the dislocation rearrangement in ferrite with the formation of cell, microbands, and shear band structures after PS. The strain-induced transformation of retained austenite to martensite in the TRIP steel contributes to the formation of a complex dislocation structure.

Effect of bake-hardening on the structure-property relationship of multiphase steels for the automotive industry

The effect of a bake-hardening (BH) treatment on the microstructure and mechanical properties has been studied in C-Mn-Si TRansformation Induced Plasticity (TRIP) and Dual Phase (DP) steels after: (i) thermomechanical processing (TMP) and (ii) intercritical annealing (IA). The steels were characterized using X-ray diffraction, transmission electron microscopy (TEM) and three-dimensional atom probe tomography (APT). All steels showed high BH response. however, the DP and trip steels after IA/BH showed the appearance of upper and lower yield points, while the stress-strain behavior of the trip steel after TMP/BH was still continuous. This was due to the higher volume fraction of bainite and more stable retained austenite in the TMP/BH steel, the formation of plastic deformation zones with high dislocation density around the "as-quenched” martensite and “TRIP” martensite in the IA/BH DP steel and IA/BH TRIP steel, respectively.

Parenting styles, family structure and adolescent dietary behaviour

Objective To examine associations between parenting styles, family structure and aspects of adolescent dietary behaviour.

Design Cross-sectional study.

Setting Secondary schools in the East Midlands, UK.

Subjects Adolescents aged 12–16 years (n 328, 57 % boys) completed an FFQ assessing their consumption of fruit, vegetables, unhealthy snacks and breakfast. Adolescents provided information on parental and sibling status and completed a seventeen-item instrument measuring the general parenting style dimensions of involvement and strictness, from which four styles were derived: indulgent, neglectful, authoritarian, authoritative.

Results After controlling for adolescent gender and age, analysis of covariance revealed no significant interactions between parenting style and family structure variables for any of the dietary behaviours assessed. Significant main effects for family structure were observed only for breakfast consumption, with adolescents from dual-parent families (P < 0·01) and those with no brothers (P < 0·05) eating breakfast on more days per week than those from single-parent families and those with one or more brother, respectively. Significant main effects for parenting style were observed for all dietary behaviours apart from vegetable consumption. Adolescents who described their parents as authoritative ate more fruit per day, fewer unhealthy snacks per day, and ate breakfast on more days per week than those who described their parents as neglectful.

Conclusions The positive associations between authoritative parenting style and adolescent dietary behaviour transcend family structure. Future research should be food-specific and assess the efficacy of strategies promoting the central attributes of an authoritative parenting style on the dietary behaviours of adolescents from a variety of family structures.

Characterization of the bake-hardening behavior of transformation induced plasticity and dual-phase steels using advanced analytical techniques

The bake-hardening (BH) behavior of TRansformation Induced Plasticity (TRIP) and Dual-Phase (DP) steels after intercritical annealing (IA) has been studied using transmission electron microscopy, X-ray diffraction and three dimensional atom probe tomography. It was found for the DP steel that carbon can segregate to dislocations in the ferrite plastic deformation zones where there is a high dislocation density around the "asquenched" martensite. The carbon pinning of these dislocations, in turn, increases the yield strength after aging. It was shown that bake-hardening also leads to rearrangement of carbon in the martensite leading to the formation of rod-like low temperature carbides in the DP steel. Segregation of carbon to microtwins in retained austenite of the TRIP steel was also evident. These factors, in combination with the dislocation rearrangement in ferrite through the formation of cells and microbands in the TRIP steel after pre-straining, lead to the different bake-hardening responses of the two steels.

Deformation and fracture characteristics of ferrite/bainite dual-phase steels

The deformation and fracture characteristics of a low carbon Si–Mn steel with ferrite/bainite dual–phase structure were investigated by thermo–mechanical controlled process (TMCP). The results showed that the curves of the instantaneous work–hardening factor n* value versus true strain ε are made up with three stages during uniform plastic deformation: n* value is relatively higher at stage I, decreases slowly with ε in stage II, and then decreases quickly with ε in stage III. Compared tothe equiaxed ferrite/bainite dual–phase steel, the quasi–polygonal ferrite/bainite dual–phase steel shows higher tensile strength and n*value in the low strain region. The voids or micro–cracks formed not only at ferrite–bainite interfaces but also within ferrite grains in the necked region, which can improve the property of resistance to crack propagation by reducing local stress concentration of the crack tips.

Modeling dual role preferences for trust-aware recommendation

Unlike in general recommendation scenarios where a user has only a single role, users in trust rating network, e.g. Epinions, are associated with two different roles simultaneously: as a truster and as a trustee. With different roles, users can show distinct preferences for rating items, which the previous approaches do not involve. Moreover, based on explicit single links between two users, existing methods can not capture the implicit correlation between two users who are similar but not socially connected. In this paper, we propose to learn dual role preferences (truster/trustee-specific preferences) for trust-aware recommendation by modeling explicit interactions (e.g., rating and trust) and implicit interactions. In particular, local links structure of trust network are exploited as two regularization terms to capture the implicit user correlation, in terms of truster/trustee-specific preferences. Using a real-world and open dataset, we conduct a comprehensive experimental study to investigate the performance of the proposed model, RoRec. The results show that RoRec outperforms other trust-aware recommendation approaches, in terms of prediction accuracy. Copyright 2014 ACM.

Does banks’ dual holding affect bank lending and firms’ investment decisions? Evidence from China

This study investigates the effect of banks’ dual holding on bank lending and firms’ investment decisions using a sample of listed firms in China. We find that dual holding leads to easier access to bank loans, a result that is more pronounced for non-state-owned enterprises (non-SOEs) than SOEs. We also find that dual holding distorts banks’ lending decisions and harms the investment efficiency for SOEs, while resulting in optimal lending decisions and enhanced investment efficiency for non-SOEs. For non-SOEs, further analysis suggests that optimal lending decisions and efficient investment can be achieved for firms with higher ownership concentration, and firms in which the family and foreign investors are the controlling shareholders. We argue that, in emerging markets, whether a bank plays a monitoring role by directly holding the debt and equity claims of companies relies heavily on whether the potential collusion between firm executives and bank managers can be averted, which in turn is determined by the firms’ governance framework and ownership structure.

Molecular dynamics study of a dual-cation ionomer electrolyte

The poly(N1222)xLi1-x[AMPS] ionomer system with dual cations has previously shown decoupled Li ion dynamics from polymer segmental motions, characterized by the glass transition temperature, which can result in a conductive electrolyte material whilst retaining an appropriate modulus (ie. stiffness) so that it can suppress dendrite formation, thereby improving safety when used in lithium metal batteries. To understand this ion dynamics behavior, molecular dynamics techniques have been used in this work to simulate structure and dynamics in these materials. These simulations confirm that the Li ion transport is decoupled from the polymer particularly at intermediate N1222+ concentrations. At 50 mol% N1222+ concentration the polymer backbone is more rigid than for higher N1222+ concentrations, but with increasing temperature Li ion transport is more significant than polymer or quaternary ammonium cation motions. Here we suggest an ion hopping mechanism for Li+, arising from structural rearrangement of ionic clusters that could explain its decoupled behavior. Higher temperatures favor an aggregated ionic structure as well as enhancing these hopping motions. The simulations discussed here provide an atomic-level understanding of ion dynamics that could contribute to designing an improved ionomer with fast ion transport and mechanical robustness.