Effects of bone-specific physical activity, gender and maturity on tibial cross-sectional bone material distribution; a cross-sectional pQCT comparison of children and young adults aged 5-29 years

Growth is the opportune time to modify bone accrual. While bone adaptation is known to be dependent on local loading and consequent deformations (strain) of bone, little is known about the effects of sex, and bone-specific physical activity on location-specific cross-sectional bone geometry during growth. To provide more insight we examined bone traits at different locations around tibial cross sections, and along the tibia between individuals who vary in terms of physical activity exposure, sex, and pubertal status. Data from 304 individuals aged 5-29 years (172 male, 132 female) were examined. Peripheral quantitative computed tomography (pQCT) was applied at 4%, 14%, 38%, and 66% of tibial length. Maturity was established by estimating age at peak height velocity (APHV). Loading history was quantified with the bone-specific physical activity questionnaire (BPAQ). Comparisons, adjusted for height, weight and age were made between sex, maturity, and BPAQ tertile groups. Few to no differences were observed between sexes or BPAQ tertiles prior to APHV, whereas marked sexual dimorphism and differences between BPAQ tertiles were observed after APHV. Cross-sectional location-specific differences between BPAQ tertiles were not evident prior to APHV, whereas clear location-specificity was observed after APHV. In conclusion, the skeletal benefits of physical activity are location-specific in the tibia. The present results indicate that the peri- or post-pubertal period is likely a more favourable window of opportunity for enhancing cross-sectional bone geometry than pre puberty. Increased loading during the peri-pubertal period may enhance the bone of both sexes.

Age-specific changes in BMI and BMI distribution among Australian adults using cross-sectional surveys from 1980 to 2008

Background: Research efforts have focused mainly on trends in obesity among populations, or changes in mean body mass index (BMI), without consideration of changes in BMI across the BMI spectrum. Examination of age-specific changes in BMI distribution may reveal patterns that are relevant to targeting of interventions.

Methods: Using a synthetic cohort approach (which matches members of cross-sectional surveys by birth year) we estimated population representative annual BMI change across two time periods (1980 to 1989 and 1995 to 2008) by age, sex, socioeconomic position and quantiles of BMI. Our study population was a total of 27 349 participants from four nationally representative Australian health surveys; Risk Factor Prevalence Study surveys (1980 and 1989), the 1995 National Nutrition Survey and the 2007/8 National Health Survey.

Results: We found greater mean BMI increases in younger people, in those already overweight and in those with lower education. For men, age-specific mean annual BMI change was very similar in the 1980s and the early 2000s (P=0.39), but there was a recent slowing down of annual BMI gain for older women in the 2000s compared with their same-age counterparts in the 1980s (P<0.05). BMI change was not uniform across the BMI distribution, with different patterns by age and sex in different periods. Young adults had much greater BMI gain at higher BMI quantiles, thus adding to the increased right skew in BMI, whereas BMI gain for older populations was more even across the BMI distribution.

Conclusions: The synthetic cohort technique provided useful information from serial cross-sectional survey data. The quantification of annual BMI change has contributed to an understanding of the epidemiology of obesity progression and identified key target groups for policy attention—young adults, those who are already overweight and those of lower socioeconomic status.

Multi-level virtual ring : cross-level name routing with embedded identifier in sensor network

This paper presents the Multi-level Virtual Ring (MVR), a new name routing scheme for sensor networks. MVR uses selection algorithm to identify sensor nodes' virtual level and uses Distribution Hash Table (DHT) to map them to the MVR, The address routing performs well in wired network, but it's not true in sensor network. Because when nodes are moving, the address of the nodes must be changed Further, the address routing needs servers to allocate addresses to nodes. To solve this problem, the name routing is being introduced, such as Virtual Ring Routing (VRR). MVR is a new name routing scheme, which improves the routing performance significantly by introducing the multi-level virtual ring and cross-level routing. Experiments show this embedded name routing is workable and achieves better routing performance.

Exercise loading and cortical bone distribution at the tibial shaft

Cortical bone is not a uniform tissue, and its apparent density [cortical volumetric density (vBMD)] varies around the bone cross-section as well as along the axial length of the bone. It is not yet known, whether the varying vBMD distribution is attributable to modulation in the predominant loads affecting bone. The aim of the present study was to compare the cortical bone mass distribution through the bone cortex (radial distribution) and around the center of mass (polar distribution) among 221 premenopausal women aged 17–40 years representing athletes involved in high impact, odd impact, high magnitude, repetitive low impact, repetitive non-impact sports and leisure time physical activity (referent controls). Bone cross-sections at the tibial mid-diaphysis were assessed with pQCT. Radial and polar vBMD distributions were analyzed in three concentric cortical divisions within the cortical envelope and in four cortical sectors originating from the center of the bone cross-section. MANCOVA, including age as a covariate, revealed no significant group by division/sector interaction in either radial or polar distribution, but the mean vBMD values differed between groups (P < 0.001). The high and odd-impact groups had 1.2 to 2.6% (P < 0.05) lower cortical vBMD than referents, in all analyzed sectors/divisions. The repetitive, low-impact group had 0.4 to 1.0% lower (P < 0.05) vBMD at the mid and outer cortical regions and at the anterior sector of the tibia. The high magnitude group had 1.2% lower BMD at the lateral sector (P < 0.05). The present results generate a hypothesis that the radial and polar cortical bone vBMD distributions within the tibial mid-shaft are not modulated by exercise loading but the mean vBMD level is slightly affected.

Direction-specific diaphyseal geometry and mineral mass distribution of tibia and fibula: A pQCT study of female athletes representing different exercise loading types

Bones adapt to prevalent loading, which comprises mainly forces caused by muscle contractions. Therefore, we hypothesized that similar associations would be observed between neuromuscular performance and rigidity of bones located in the same body segment. These associations were assessed among 221 premenopausal women representing athletes in high-impact, odd-impact, highmagnitude, repetitive low-impact, and repetitive nonimpact sports and physically active referents aged 17–40 years. The whole group mean age and body mass were 23 (5) and 63 (9) kg, respectively. Bone cross sections at the tibial and fibular mid-diaphysis were assessed with peripheral quantitative computed tomography (pQCT). Density-weighted polar section modulus (SSI) and minimal and maximal crosssectional moments of inertia (Imin, Imax) were analyzed. Bone morphology was described as the Imax/Imin ratio. Neuromuscular performance was assessed by maximal power during countermovement jump (CMJ). Tibial SSI was 31% higher in the high-impact, 19% in the odd-impact, and 30% in the repetitive low-impact groups compared with the reference group (P\0.005). Only the high-impact group differed from the referents in fibular SSI (17%, P\0.005). Tibial morphology differed between groups (P = 0.001), but fibular morphology did not (P = 0.247). The bone-bygroup interaction was highly significant (P\0.001). After controlling for height, weight, and age, the CMJ peak power correlated moderately with tibial SSI (r = 0.31, P\0.001) but not with fibular SSI (r = 0.069, P = 0.313). In conclusion, observed differences in the association between neuromuscular performance and tibial and fibular traits suggest
that the tibia and fibula experience different loading

Analysis of the current distribution in an aluminum electrolysis cell with copper collector-bar cathode assembly

Understanding the magneto-hydrodynamic forces generated due to the external magnetic field and current density distribution within the cell (current in cell linings) is important in the optimization of cell dynamics. It is well documented that these factors play a crucial role in establishing the metal-pad stability of the cell. Conventional cells use the cathode-collector-bar assembly to carry the current through molten aluminium, the cathode and the steel collector-bar to nearest external bus. The electrical conductivity of the steel is so poor relative to the molten aluminium that the outer third of the collector bar carries the maximum load, which in turn increases the horizontal components of the current within the cell. Previous studies have modelled improvement in the cell instability through external magnetic compensation by redistributing current in the cathode busbar. Very little to date has been published on work to improve the current distribution within the cell. In this work, the current distribution in an aluminium electrolysis cell with copper collector-bar was predicted using finite element modelling. A 2D cross-section of a commercial cell was used under steady conditions of electrical fields in anode, electrolyte, molten aluminium and copper cathode-assembly. Different shapes and sizes of the cathode assembly are also considered to optimise the distribution of current throughout the cathode lining. The findings indicated that the copper-bar of similar size to steel could save voltage up to 150 mV. There is a reduction of more than 70% in peak current density value due to the copper inserts. The predicted trends of current distribution show a good agreement with previously published data.

Development and characterisation of 20 microsatellite loci isolated from the large bent-wing bat, Miniopterus schreibersii (Chiroptera: Miniopteridae) and their cross-taxa utility in the family Miniopteridae

The large bent-wing bat, Miniopterus schreibersii (Kuhl 1819), has a long history of taxonomic uncertainty and many populations are known to be in a state of decline. Microsatellite loci were developed for the taxonomic and population genetic assessment of the Australian complex of this species. Of the 33 primer sets designed for this research, seven (21%) were deemed suitably polymorphic for population-level analyses of the Australian taxa, with five (71%) of these loci revealing moderate to high levels of polymorphism (PIC = 0.56 to 0.91). The cross-taxa utility of the M. schreibersii microsatellite markers was assessed in the microbat (Chiroptera) family Miniopteridae. Sub-species and species covering the Miniopteridae’s global distribution (with the exception of the Middle East) were selected, numbering 25 taxa in total. Amplification was successful for 26 loci, of which 20 (77%) were polymorphic. High cross-taxa utility of markers was observed with amplification achieved for all taxa for between four (20%) and 20 (100%) loci, and polymorphism was considered moderate to high (PIC = 0.47–0.91) for 12 (60%) of these loci. The high cross-taxa utility of the microsatellites reported herein reveal versatile and cost-effective molecular markers, contributing an important genetic resource for the research and conservation of Miniopteridae species worldwide.

Retention of the original LLC structure in a cross-linked poly(ethylene glycol) diacrylate hydrogel with reinforcement from a silica network

Cross-linked poly(ethylene glycol) diacrylate (PEGDA) hydrogels with uniformly controlled nanoporous structures templated from hexagonal lyotropic liquid crystals (LLC) represent separation membrane materials with potentially high permeability and selectivity due to their high pore density and narrow pore size distribution. However, retaining LLC templated nanostructures is a challenge as the polymer gels are not strong enough to sustain the surface tension during the drying process. In the current study, cross-linked PEGDA gels were reinforced with a silica network synthesized via an in situ sol-gel method, which assists in the retention of the hexagonal LLC structure. The silica precursor does not obstruct the formation of hexagonal phases. After surfactant removal and drying, these hexagonal structures in samples with a certain amount of tetraethoxysilane (TEOS) loading are well retained while the nanostructures are collapsed in samples without silica reinforcement, leading to the hypothesis that the reinforcement provided by the silica network stabilizes the LLC structure. The study examines the conditions necessary for a sufficient and well dispersed silica network in PEGDA gels that contributes to the retention of original LLC structures, which potentially enables broad applications of these gels as biomedical and membrane materials.

Urbanicity and lifestyle risk factors for cardiometabolic diseases in rural Uganda: a cross-sectional study

Urban living is associated with unhealthy lifestyles that can increase the risk of cardiometabolic diseases. In sub-Saharan Africa (SSA), where the majority of people live in rural areas, it is still unclear if there is a corresponding increase in unhealthy lifestyles as rural areas adopt urban characteristics. This study examines the distribution of urban characteristics across rural communities in Uganda and their associations with lifestyle risk factors for chronic diseases.

Cross-cultural comparison of motor competence in children from Australia and Belgium

Motor competence in childhood is an important determinant of physical activity and physical fitness in later life. However, childhood competence levels in many countries are lower than desired. Due to the many different motor skill instruments in use, children's motor competence across countries is rarely compared. The purpose of this study was to evaluate the motor competence of children from Australia and Belgium using the Körperkoordinationstest für Kinder (KTK). The sample consisted of 244 (43.4% boys) Belgian children and 252 (50.0% boys) Australian children, aged 6-8 years. A MANCOVA for the motor scores showed a significant country effect. Belgian children scored higher on jumping sideways, moving sideways and hopping for height but not for balancing backwards. Moreover, a Chi squared test revealed significant differences between the Belgian and Australian score distribution with 21.3% Belgian and 39.3% Australian children scoring "below average." The very low levels reported by Australian children may be the result of cultural differences in physical activity contexts such as physical education and active transport. When compared to normed scores, both samples scored significantly worse than children 40 years ago. The decline in children's motor competence is a global issue, largely influenced by increasing sedentary behavior and a decline in physical activity.

The asymptotic distribution of the CADF unit root test in the presence of heterogeneous AR(p) errors

The CADF test of Pesaran (J Appl Econ 22:265–312, 2007) are among the most popular univariate tests for cross-section correlated panels around. Yet, the existing asymptotic analysis of this test statistic is limited to a model in which the errors are assumed to follow a simple AR(1) structure with homogenous autoregressive coefficients. One reason for this is that the model involves an intricate identification issue, as both the serial and cross-section correlation structures of the errors are unobserved. The purpose of the current paper is to tackle this issue and in so doing extend the existing analysis to the case of AR((Formula presented.)) errors with possibly heterogeneous coefficients.

Covalent/crystallite cross-linked co-network hydrogels : an efficient and simple strategy for mechanically strong and tough hydrogels

Covalent/crystallite cross-linked co-network hydrogels have been prepared using epoxy and PVA through a cyclic freezing-thawing process. The PVA/epoxy hydrogels show enhanced mechanical strength and toughness. PVA/epoxy hydrogels with 4 wt% epoxy loading display maximum tensile strength and toughness of 1.1 MPa and 2838 kJ/m3 respectively. The fracture toughness of PVA/epoxy hydrogels ranges from 160 to 450 J/m2. Radius of gyration and fractal information of the hydrogels were obtained by fitting the SAXS data to the Guinier and power law models. The enhanced mechanical properties are attributed to the increase in covalent bonding and decrease in crystallite distribution with an increase in epoxy content. However a larger hysteresis is shown for PVA/epoxy hydrogels due to irreversible destruction of covalent bonds between epoxy and PVA.