Estimating hydrogen sulphide dissipation rate constant under the influence of different chemical dosing

Sewer odour and corrosion is caused by the reduction of sulphide ions and the release of hydrogen sulphide gas (H2S) into the sewer atmosphere. The reduction of sulphide is determined by its dissipation rate which depends on many processes such as emission, oxidation and precipitation that prevail in wastewater environments. Two factors that mainly affect the dissipation of sulphide are sewer hydraulics and wastewater characteristics; modification to the latter by dosing certain chemicals is known as one of the mitigation strategies to control the dissipation of sulphide. This study investigates the dissipation of sulphide in the presence of NaOH, Mg(OH)2, Ca(NO3)2 and FeCl3 and the dissipation rate is developed as a function of hydraulic parameters such as the slope of the sewer and the velocity gradient. Experiments were conducted in a 18m experimental sewer pipe with adjustable slope to which, firstly no chemical was added and secondly each of the above mentioned chemicals was supplemented in turn. A dissipation rate constant of 2×10^-6 for sulphide was obtained from experiments with no chemical addition. This value was then used to predict the sulphide concentration that was responsible for the emission of H2S gas in the presence of one of the above mentioned four chemicals. It was found that the performance of alkali substances (NaOH and Mg(OH)2) in suppressing the H2S gas emission was excellent while ferric chloride showed a moderate mitigating effect due to its slow reaction kinetics. Calcium nitrate was of little value since the wastewater used in this study experienced almost no biological growth. Thus the effectiveness of selected chemicals in suppressing H2S gas emission had the following order: NaOH ≥ Mg(OH)2 ≥ FeCl3 ≥ Ca(NO3)2.

Nanoscale variation in energy dissipation in austenitic shape memory alloys in ultimate loading cycles

Wavy behaviours of hysteresis energy variation in nanoscale bulk of thermomechanical austenitic NiTi shape memory alloy are reported in ultimate nanoindentation loading cycles. One sharp and two spherical tips were used while two loading-unloading rates were applied. For comparison, another austenitic copper-based shape memory alloy, CuAlNi shape memory alloy, and a metal with no phase transition, elastoplastic Cu, were investigated. In shape memory alloys, the hysteresis energy variation ultimately undergoes a linear decrease with internal wavy fluctuations and no stabilisation was observed. The internal energy fluctuation in these alloys was found dissimilar depending on the loading-unloading rate and the indentation tip geometry. In contrast, there was an absence of both overall and internal variations in hysteresis energy for Cu after the second loading cycle. The underlying physics of these variations is discussed and found to be attributed to both the created dislocations and ratcheting thermal-mechanical behaviour of the phase-transformed volume in shape memory alloys.

Clustering versus evenly distributing energy dissipation in wireless sensor routing for prolong network lifetime

A novel Cluster Heads (CH) choosing algorithm based on both Minimal Spanning Tree and Maximum Energy resource on sensors, named MSTME, is provided for prolonging lifetime of wireless sensor networks. MSTME can satisfy three principles of optimal CHs: to have the most energy resource among sensors in local clusters, to group approximately the same number of closer sensors into clusters, and to distribute evenly in the networks in terms of location. Simulation shows the network lifetime in MSTME excels its counterparts in two-hop and multi-hop wireless sensor networks.

Energy dissipation and geometry effects over stepped spillways

The energy dissipation process is the major significant point in the designof hydraulic structure. The dissipation of high energy on stepped weirsprevents any damage in the weir itself and channels the energy ownstream to reduce the stilling basin size. In this study, four physical models are used to evaluate the impact of adding end sills that have a quarter circle shape at step edges. The amount of energy loss on weirs under different flow regimes is investigated by experimental work. Stepped weirs have a suitable number of steps and two different ratios of the width to height (2.22, and 2.40). The scale of the physical models is 20:1. The outcomes of the dimensional analyses refer to the critical depth for flow in weirs to the height of step yc/h, the end sill radius, and the number of steps N are more effective parameters than others inthe energy loss process. Moreover, for small values of yc/h, the energydissipation is the greatest. Any increase in yc/h leads to a decrease in theenergy dissipation, while the energy dissipation increases with the number of steps (N).

Quantifying turbulent mixing and oxygen fluxes in a Mediterranean-type, microtidal estuary

Experiments were carried out on an intermittent estuary during its closed (summer) and open (winter) states to identify the physical processes responsible for vertical mixing across the halocline, and to quantify vertical fluxes of oxygen and salt between water layers. During the blocked phase a two-layer structure was observed, with a brackish surface layer overlying old seawater. Within a deep basin the wind-driven turbulent mixing was consistent with the measured surface-layer turbulent dissipation, but the dissipation in the bottom layer appeared to be driven by internal seiching. In the shallow regions of the estuary vertical fluxes of dissolved oxygen were indicative of oxygen demand by respiration and remineralization of organic material in bottom water and sediments. During the estuary's open phase a three-layer structure was observed, having a fresh, river-derived surface layer, a middle layer of new seawater, and a bottom layer of old seawater. In the shallower regions surface-layer turbulent diffusion was consistent with the strong, gusty winds experienced at the time. The dissolved oxygen of the incoming seawater decreased to very low values by the time it reached the upstream deep basin as a result of the low cross-pycnocline oxygen flux being unable to compensate for the oxygen utilization. At least 50 % of the cross-pycnocline salt fluxes in the shallow reaches of the open estuary are suggested to be driven by Holmboe instabilities.

Turbulence and stratification in priest pot, a productive pond in a sheltered environment

Priest Pot is an example of the abundant ponds that, collectively, contribute crucially to species diversity. Despite extensive biological study, little has been reported about the physical framework that supports its ecological richness. This article elucidates the physical character of Priest Pot’s water column and thus that of similar water bodies. Vertical thermal microstructure profiles were recorded during summer 2003 and analyzed alongside concurrent meteorological data. During summer stratification, the thermal structure appeared to be dominated by surface heat fluxes. Surface wind stress, limited by sheltering vegetation, caused turbulent overturns once a surface mixed layer was present but appeared to contribute little to setting up the thermal structure. Variations in full-depth mean stratification occurred predominantly over seasonal and ∼5-day time scales, the passage of atmospheric pressure systems being posited as the cause of the latter. In the uppermost ∼0.5 m, where the stratification varied at subdaily time scales, turbulence was active (sensu Ivey and Imberger 1991) when this layer was mixed, with dissipation values ε ∼ 10⁻⁸ m² s⁻³ and vertical diffusivity K_Z = 10^₋₄ — 10_⁻⁶ m^₂ s⁻¹. Where the water column was stratified, turbulence was strongly damped by both buoyancy and viscosity, and K_Z was an order of magnitude smaller. Vertical transport in the mixed layer occurred via many small overturns (Thorpe scale r.m.s. and maximum values were typically 0.02 m and 0.10 m, respectively), and seston were fully mixed through the water column.

Expression of uncoupling protein-3 subsarcolemmal and intermyofibrillar mitochondria of various mouse muscle types and its moduclation by fasting

Uncoupling protein-3 (UCP3) is a mitochondrial inner-membrane protein abundantly expressed in rodent and human skeletal muscle which may be involved in energy dissipation. Many studies have been performed on the metabolic regulation of UCP3 mRNA level, but little is known about UCP3 expression at the protein level. Two populations of mitochondria have been described in skeletal muscle, subsarcolemmal (SS) and intermyofibrillar (IMF), which differ in their intracellular localization and possibly also their metabolic role. To examine if UCP3 is differentially expressed in these two populations and in different mouse muscle types, we developed a new protocol for isolation of SS and IMF mitochondria and carefully validated a new UCP3 antibody. The data show that the density of UCP3 is higher in the mitochondria of glycolytic muscles (tibialis anterior and gastrocnemius) than in those of oxidative muscle (soleus). They also show that SS mitochondria contain more UCP3 per mg of protein than IMF mitochondria. Taken together, these results suggest that oxidative muscle and the mitochondria most closely associated with myofibrils are most efficient at producing ATP. We then determined the effect of a 24-h fast, which greatly increases UCP3 mRNA (16.4-fold) in muscle, on UCP3 protein expression in gastrocnemius mitochondria. We found that fasting moderately increases (1.5-fold) or does not change UCP3 protein in gastrocnemius SS or IMF mitochondria, respectively. These results show that modulation of UCP3 expression at the mRNA level does not necessarily result in similar changes at the protein level and indicate that UCP3 density in SS and IMF mitochondria can be differently affected by metabolic changes.

A reservoir of brown adipocyte progenitors in human skeletal muscle

Brown adipose tissue uncoupling protein-1 (UCP1) plays a major role in the control of energy balance in rodents. It has long been thought, however, that there is no physiologically relevant UCP1 expression in adult humans. In this study we show, using an original approach consisting of sorting cells from various tissues and differentiating them in an adipogenic medium, that a stationary population of skeletal muscle cells expressing the CD34 surface protein can differentiate in vitro into genuine brown adipocytes with a high level of UCP1 expression and uncoupled respiration. These cells can be expanded in culture, and their UCP1 mRNA expression is strongly increased by cell-permeating cAMP derivatives and a peroxisome-proliferator-activated receptor-{gamma} (PPAR{gamma}) agonist. Furthermore, UCP1 mRNA was detected in the skeletal muscle of adult humans, and its expression was increased in vivo by PPAR{gamma} agonist treatment. All the studies concerning UCP1 expression in adult humans have until now been focused on the white adipose tissue. Here we show for the first time the existence in human skeletal muscle and the prospective isolation of progenitor cells with a high potential for UCP1 expression. The discovery of this reservoir generates a new hope of treating obesity by acting on energy dissipation.

Acetylene plasma polymerized surfaces for covalent immobilization of dense bioactive protein monolayers

Smooth polymerized surfaces, suitable for biochemical and biomedical applications, were deposited using a modified plasma enhanced chemical vapour deposition method with acetylene as a reaction precursor. Horseradish peroxidase (HRP) activity assays showed that the protein immobilized on the plasma polymerized surfaces maintained its biological function for a much longer period of time compared to that on uncoated surfaces. The kinetics of HRP attachment to the plasma polymerized surfaces were analyzed using quartz crystal microbalance with dissipation analysis. Spectroscopic ellipsometry and attenuated total reflection Fourier transform infrared spectroscopy were used to determine the thickness and the quantity of the attached protein. The results showed that the plasma polymerized surfaces provided a high density of attachment sites to covalently immobilize a dense monolayer of proteins.

A probabilistic movement model for shortest path formation in virtual ant-like agents

We propose a probabilistic movement model for controlling ant-like agents foraging between two points. Such agents are all identical, simple, autonomous and can only communicate indirectly through the environment. These agents secrete two types of pheromone, one to mark trails towards the goal and another to mark trails back to the starting point. Three pheromone perception strategies are proposed (Strategy A, B and C). Agents that use strategy A perceive the desirability of a neighbouring location as the difference between levels of attractive and repulsive pheromone in that location. With strategy B, agents perceive the desirability of a location as the quotient of levels of attractive and repulsive pheromone. Agents using strategy C determine the product of the levels of attractive pheromone with the complement of levels of repulsive pheromone. We conduct experiments to confirm directionality as emergent property of trails formed by agents that use each strategy. In addition, we compare path formation speed and the quality of the formed path under changes in the environment. We also investigate each strategy's robustness in environments that contain obstacles. Finally, we investigate how adaptive each strategy is when obstacles are eventually removed from the scene and find that the best strategy of these three is strategy A. Such a strategy provides useful guidelines to researchers in further applications of swarm intelligence metaphors for complex problem solving.

Colloid probe AFM study of thermal collapse and protein interactions of poly(N-isopropylacrylamide) coatings

Graft coatings of poly(N-isopropylacrylamide) (pNIPAM) are of considerable interest for the reversible control of bio-interfacial interactions. In this study, graft coatings were prepared by free radical polymerisation from surface-bound polymerisable groups, on silicon wafers and quartz crystal microbalance (QCM) sensors. QCM with dissipation monitoring showed a gradual, extended phase change as the temperature increased. Colloid probe atomic force microscopy (CP-AFM) revealed a marked change in the compressibility of the coating below and above the lower critical solution temperature (LCST). Force curves showed an approximate 9-fold reduction in thickness between 24 °C and 38 °C, yet the collapsed coating at 38 °C still had a thickness significantly higher than the ellipsometrically determined dry thickness, indicating a residual extent of hydration above the LCST. At all temperatures, interaction force curves showed steric repulsion, though over different distances. There was little hysteresis between approach and retract force curves, which is evidence for almost instantaneous relaxation of the coating upon decompression. CP-AFM using a probe coated with bovine serum albumin (BSA) showed repulsive interactions with little approach/retraction hysteresis below the LCST, indicating lack of adhesion between the pNIPAM coating and the BSA-coated probe. In contrast, above the LCST the force curves on retraction were characteristic of adhesion, while the approach curves were still repulsive, and the adhesion increased in strength as the temperature was increased further beyond the LCST. Thus, QCM-D and CP-AFM data correlated well in showing a gradual nature of the phase transition and a concomitant gradual change in the interaction force with BSA.

Simulation of a novel piezoelectric energy harvester

This paper focuses on a novel piezoelectric energy harvester for nanofiber PVDF to capture energy from vibration environment. A Resembling CMOS(R-CMOS) circuit consisting of two pMOS transistors and two nMOS transistors is presented, which can greatly increase the energy efficiency and reduce the power dissipation tremendously. Meanwhile, the novel harvester supplies smooth direct current. Simulation result of MULTISIM has shown that by using this novel piezoelectric energy harvester the input voltage (5v) can be rectified to be an output voltage (4.24v). The voltage conversion rate of the novel harvester is as high as 84.8% which is much larger than the rate of traditional rectifier circuit. Its potential application is in micro sensors, wireless transducers, and sensor networks.

Computational simulation of the influence of inert particles on incomplete combustion of methane at a low air factor

It is well known that the gas–solid system plays a significant role in many industrial processes. It is a complex physical and chemical process, generally consisting of heat transfer, mass transfer, species diffusion, and chemical reactions. In this paper, the reaction of methane with air at a low air factor and the gas flow in a fluidized bed with 0.1 mm solid particles are computationally simulated to enable the study of the effect of the inert particles on the species diffusion and the chemical reactions. The reaction of methane and air is modeled by a two-step reaction mechanism that produces a continuous fluid phase composed of six gases (CH₄, CO, O₂, CO₂, H₂O, and N₂) and discrete solid particles in the reactor. The simulation results are compared with experiment and show that the finite rate model and the eddy dissipation model can well describe the reactions of gases in high-density gas–solid systems. The distribution of each gas and the particle behaviors are analyzed for incomplete combustion at different concentrations of loaded solid particles. The inert particles change the reactions by enhancing both the chemical kinetics and the species diffusion dynamics.

Stress-induced rise in body temperature is repeatable in free-ranging Eastern chipmunks (Tamias striatus)

In response to handling or other acute stressors, most mammals, including humans, experience a temporary rise in body temperature (T b). Although this stress-induced rise in T b has been extensively studied on model organisms under controlled environments, individual variation in this interesting phenomenon has not been examined in the field. We investigated the stress-induced rise in T b in free-ranging eastern chipmunks (Tamias striatus) to determine first if it is repeatable. We predicted that the stress-induced rise in T b should be positively correlated to factors affecting heat production and heat dissipation, including ambient temperature (T a), body mass (M b), and field metabolic rate (FMR). Over two summers, we recorded both T b within the first minute of handling time (T b1) and after 5 min of handling time (T b5) 294 times on 140 individuals. The mean ∆T b (T b5 – T b1) during this short interval was 0.30 ± 0.02°C, confirming that the stress-induced rise in T b occurs in chipmunks. Consistent differences among individuals accounted for 40% of the total variation in ∆T b (i.e. the stress-induced rise in T b is significantly repeatable). We also found that the stress-induced rise in T b was positively correlated to T a, M b, and mass-adjusted FMR. These results confirm that individuals consistently differ in their expression of the stress-induced rise in T b and that the extent of its expression is affected by factors related to heat production and dissipation. We highlight some research constraints and opportunities related to the integration of this laboratory paradigm into physiological and evolutionary ecology.

Heat for nothing or activity for free? Evidence and implications of activity-thermoregulatory heat substitution

If heat generated through activity can substitute for heat required for thermoregulation, then activity in cold environments may be energetically free for endotherms. Although the possibility of activity-thermoregulatory heat substitution has been long recognized, its empirical generality and ecological implications remain unclear. We combine a review of the literature and a model of heat exchange to explore the generality of activity-thermoregulatory heat substitution, to assess the extent to which substitution is likely to vary with body size and ambient temperature, and to examine some potential macroecological implications. A majority of the 51 studies we located showed evidence of activity-thermoregulatory heat substitution (35 of 51 studies), with 28 of 32 species examined characterized by substitution in one or more study. Among studies that did detect substitution, the average magnitude of substitution was 57%, but its occurrence and extent varied taxonomically, allometrically, and with ambient temperature. Modeling of heat production and dissipation suggests that large birds and mammals, engaged in intense activity and exposed to relatively warm conditions, have more scope for substitution than do smaller endotherms engaged in less intense activity and experiencing cooler conditions. However, ambient temperature has to be less than the lower critical temperature (the lower bound of the thermal neutral zone) for activity-thermoregulatory heat substitution to occur and this threshold is lower in large endotherms than in small endotherms. Thus, in nature, substitution is most likely to be observed in intermediate-sized birds and mammals experiencing intermediate ambient temperatures. Activity-thermoregulatory heat substitution may be an important determinant of the activity patterns and metabolic ecology of endotherms. For example, a pattern of widely varying field metabolic rates (FMR) at low latitudes that converges to higher and less variable FMR at high latitudes has been interpreted as suggesting that warm environments at low latitudes allow a greater variety of feasible metabolic niches than do cool, high-latitude environments. However, activity-thermoregulatory heat substitution will generate this pattern of latitudinal FMR variation even if endotherms from cold and warm climates are metabolically and behaviorally identical, because the metabolic rates of resting and active animals are more similar in cold than in warm environments. Activity-thermoregulatory heat substitution is an understudied aspect of endotherm thermal biology that is apt to be a major influence on the physiological, behavioral and ecological responses of free-ranging endotherms to variation in temperature.