Direct measurement of surface forces due to charging of solids immersed in a nonpolar liquid

Direct measurements of a long-range force between charged solid surfaces in a nonpolar liquid are presented for the first time. Measurements were made between mica surfaces in solutions of the anionic surfactant sodium di-2-ethylhexylsulfosuccinate (AOT) at millimolar concentrations in n-decane using a surface force apparatus which has been modified to improve its sensitivity for detecting a weak and long-range force. Modifications include a magnetic drive system, the use of a weak cantilever spring with the apparatus mounted in a vertical configuration, and a detailed consideration of the interference optics to allow accurate measurements of surface separations up to several micrometers. The results show a repulsion that is well fitted by theoretical curves based on a model in which only counterions enter the calculation, in other words, in the absence of a reservoir of ions in the solvent. Fitting the theory to the data allows an estimate of the mica surface charge density of ∼1 mC/m². A mechanism for surface charging of mica in this solution is proposed, which includes a role for trace amounts of water that are inevitably present and adsorbed surface aggregates of AOT. The relevance of the results to previously observed charge stabilization of colloids in nonaqueous solvents is discussed.

Direct measurement of the force between two lipid bilayers and observation of their fusion

The force between twophosphatidylcholine bilayers is measured as a function of their separation, showing a strong hydration repulsion at short range, as previously reported by LeNeveu et al. (LeNeveu, D.M., Rand, R.P., Parsegian, V.A. and Gingell, D. (1977) (Biophys. J. 18, 209-230). The experimental technique also allows direct observation of the molecular process by which two bilayers fuse into one.

Direct measurement of surface forces between sapphire crystals in aqueous solutions

Measurements are presented of the electrical double layer and van der Waals forces between the (0001) surfaces of two single-crystal sapphire platelets immersed in an aqueous solution of NaCl at pH values from 6.7 to 11. The results fit the standard Deryaguin-Landau-Verwey-Overbeek (DLVO) theory, with a Hamaker constant of 6.7 × 10−20 J. These are the first measurements made using the Israelachvili surface forces apparatus without mica as a substrate material, and they demonstrate the possibility of using this technique to explore the surface chemistry of a wider range of materials.

1-14C-Linoleic Acid distrubution in various tissue lipids of guinea pigs following an oral dose

A recent study on the metabolism of 1-¹⁴C-α-linolenic acid in the guinea pig revealed that the fur had the highest specific activity of all tissues examined, 48 h after dosing. The present study investigated the pattern of tissue lipid labeling following an oral dose of 1-¹⁴C-linoleic acid after the animals had been dosed for the same time as above. Guinea pigs were fed one of two diets with a constant linoleic acid content (18% total fatty acids) and a different content of α-linolenic acid (0.3 or 17.3%) from weaning for 3 wk and 1-¹⁴C-linoleic acid was given orally to each animal for 48 h prior to sacrifice. The most highly labeled tissues (dpm/mg of linoleic acid) were liver, followed by brain, lung and spleen, heart, kidney and adrenal and intestines, in both diet groups. The liver had almost a three-fold higher specific activity than skin and fur which was more extensively labeled than the adipose and carcass. Approximately two-thirds of the label in skin plus fur was found in the fur which, because of a low lipid mass, would indicate that the fur was highly labeled. All tissues derived from animals on the diet with the low α-linolenic acid level were significantly more labeled than the tissues from the animals on the high α-linolenic acid diet, by a factor of 1.5 to 3. The phospholipid fraction was the most highly labeled fraction in the liver, free fatty acids were the most labeled fraction in skin & fur, while triacyglycerols were the most labeled in the carcass and adipose tissue. In these tissues, more than 90% of the radioactivity was found in fatty acids with 2-double bonds in the tissue lipids. These data indicate that the majority of label found in guinea pig tissues 48 h after dosing was still associated with a fatty acid fraction with 2-double bonds, which suggests there was little metabolism of linoleic acid to more highly unsaturated fatty acids in this time frame. In this study, the labeling of guinea pig tissues with linoleic acid, 48 h after dosing, was quite different from the labeling with α-linolenic acid reported previously. The retention of the administered radioactivity from ¹⁴C-linoleic acid in the whole body lipids was 1.6 times higher in the group fed the low α-linolenic acid diet (diet contained a total of 1.8 g PUFA/100 g diet)compared with the group fed the high α-linolenic acid diet (diet contained 3.6 g PUFA/100 g diet). The lack of retention of ¹⁴C-labeled lipids in the whole body would be consistent with an increased rate of β-oxidation of the labeled fatty acid on the diet rich in PUFA, a result supported by other studies using direct measurement of labeled carbon dioxide.

Pathways for algal recolonization in seasonally-flowing streams

1. In semi-arid climates, seasonally-flowing streams provide most of the water required for human use, but knowledge of how water extraction affects ecological processes is limited. Predicted alterations in stream flows associated with the impacts of climate change further emphasize the need to understand these processes. Benthic algae are an important base for stream food webs, but we have little knowledge of how algae survive dry periods or respond to altered flow regimes.

2. We sampled 19 streams within the Grampians National Park, south-eastern Australia and included four components: a survey of different drought refuges (e.g. permanent pools, dry biofilm on stones and dry leaf packs) and associated algal taxa; a survey of algal regrowth on stones after flows recommenced to determine which refuges contributed to regrowth; reciprocal transplant experiments to determine the relative importance of algal drift and regrowth from dry biofilm in recolonization; direct measurement of algal drift to determine taxonomic composition in relation to benthic assemblage composition.

3. Algae showed little specificity for drought refuges but did depend on them; no species were found that were not present in at least one of the perennial pool, dry biofilm or leaf pack refuges. Perennial pools were most closely correlated with the composition of algal assemblages once flows resumed, but the loss or gain of perennial pools that might arise from stream regulation is unlikely to affect the composition of algal regrowth. However, regulated streams were associated with strong increases in algal density in dry biofilm, including increased densities of Cyanobacteria.

4. A model for algal recolonization in seasonally-flowing streams identified three pathways for algal recolonization (drift-dependent, dry biofilm-dependent and contributions from both), depending on whether streams are diatom-dominated or dominated by filamentous algae. The model predicted the effects of changes to stream flow regimes on benthic algal recolonization and provides a basis for hypotheses testable in streams elsewhere.

Health-related quality of life is low in secondary school children in Fiji

The health and wellbeing of children in lower-income countries is the focus of much international effort, yet there has been very little direct measurement of this. Objective. The current objective was to study the health-related quality of life (HRQoL) in a general population of secondary school children in Fiji, a low middle-income country in the Pacific. Methods. Self-reported HRQoL was measured by the Pediatric Quality of Life Inventory 4.0 in 8947 school children (aged 12–18 years) from 18 secondary schools on Viti Levu, the main island of Fiji. HRQoL in Fiji was compared to that of school-aged children in 13 high- and upper middle-income countries. Results. The school children in Fiji had lower HRQoL than the children in the 13 comparison countries, with consistently lower physical, emotional, social, and school functioning and wellbeing. HRQoL was particularly low amongst girls and Indigenous Fijians. Conclusions. These findings raise concerns about the general functioning and wellbeing of school children in Fiji. The consistently low HRQoL across all core domains suggests pervasive underlying determinants. Investigation of the potential determinants in Fiji and validation of the current results in Fiji and other lower-income countries are important avenues for future research.

A uniaxial tensile stage with tracking capabilities for micro X-ray diffraction applications

First results are presented for a uniaxial tensile stage designed to operate on a scanning micro X-ray diffraction synchrotron beamline. The new tensile stage allows experiments at typical loading cycles used in standard engineering stress–strain tests. Several key features have been implemented to support in situ loading experiments at the intragranular length scale. The physical size and weight of the load cell were minimized to maintain the correct working distance for the X-ray focusing optics and to avoid overloading the high-resolution raster scan translation stages. A high-magnification optical microscope and image correlation code were implemented to enable automated online tracking capabilities during macroscopic elongation of the sample. Preliminary in situ tensile loading experiments conducted on beamline 12.3.2 at the Advanced Light Source using a polycrystalline commercial-purity Ti test piece showed that the elastic–plastic response of individual grains could be measured with submicrometre spatial resolution. The experiments highlight the unique instrumentation capabilities of the tensile stage for direct measurement of deviatoric strain and observation of dislocation patterning on an intragranular length scale as a function of applied load.

Multibody approach to musculoskeletal and joint loading

Joint and muscular loads are the major internal loads in the human body. Knowing or being able to estimate those loads is of importance in multiple instances, such as in designing implants, predicting surgical outcomes, in estimating occupational loading, and in designing interventions. Unfortunately, the direct measurement of the body's internal forces is difficult, rather invasive, and requires surgical operations. Therefore, the need is growing for computational tools for muscular, bone and joint loading estimation. This article will present a review of the computational methods that can be utilized for musculoskeletal and joint system loading estimation. © 2014 CIMNE, Barcelona, Spain.

Corrigendum to "Undergraduate nursing students' performance in recognising and responding to sudden patient deterioration in high psychological fidelity simulated environments: An Australian multi-centre study" [Nurse Educ. Today 34(5) (May 2014

The authors regret that the original text: The SAGAT instrument has been previously validated (Bell et al., 2006) is incorrect and should read: The SAGAT technique has been demonstrated as valid, sensitive and reliable measure of situation awareness in diverse applications (Endsley, 2000).

Endsley, M. R. (2000) Direct measurement of situation awareness: Validity and use of SAGAT. In Endsley, M.R. & Garland, D.J. (Eds.), Situation awareness analysis and measurement (pp 147–173). New Jersey: Lawrence Erlbaum Associates.

The authors would like to apologise for any inconvenience caused.

Measurement of aqueous film thickness between charged mercury and mica surfaces : a direct experimental probe of the Poisson-Boltzmann distribution

A stable aqueous electrolyte film is formed between a mercury drop and a flat mica surface due to electrical double-layer repulsion when a negative potential is applied to the mercury. Film thickness has been measured as a function of applied potential while keeping the film pressure constant. By making measurements in this way, it is possible to map the data directly according to the Poisson-Boltzmann equation. An excellent fit to the data is obtained, providing direct evidence for this classical equation and its use as the basis of the Gouy-Chapman model of the diffuse double layer in electrolyte solutions.

Modeling, parameter measurement and sensorless speed estimation of IPM synchronous generator for direct drive variable speed wind turbine application

This paper presents simple methods of determining parameters of interior permanent magnet (IPM) synchronous generator such as magnet flux (λM), d-axis inductance (Ld) and q-axis inductance (Lq) of IPM synchronous generator, which are used to control the wind turbine generator. These methods are simple and do not require any complex theory, signal injection or special equipment. Moreover, a sensorless speed estimator is proposed to estimate the speed of the generator without using speed sensor. The measured parameters are used in this speed estimator. The elimination of speed sensor will enhance the system robustness and reduce the design complexity and system cost for a small-scale wind turbine considered in this paper. The effectiveness of parameter measurement methods and sensorless speed estimator is demonstrated by experimental results. Experimental results show that the proposed speed estimator that uses the measured parameters can estimate the generator speed with a small error.

Methodological considerations in the measurement of institutional and structural forms of HIV discrimination

The systematic measurement of HIV/AIDS-related discrimination is imperative within the current rhetoric that holds discrimination as one of the two ‘biggest' barriers to HIV/AIDS pandemic intervention. This paper provides a methodological critique of the UNAIDS (2000b) Protocol for the Identification of Discrimination against People Living with HIV (the Protocol) . Specifically, the paper focuses on the Protocol's capacity to accurately identify and measure institutional levels of HIV-related discrimination that allows data that are reliable and comparable across time and contexts. Conceptual issues including the Protocol's objective as an indicator versus a direct measure of discrimination and the role of the Protocol as a tool of research versus a tool of advocacy are explored. Design issues such as the operationalization of discrimination, appropriateness of indicator content, sampling and data collection strategies and issues of scoring are also evaluated. It is hoped that the matters outlined will provide readers with ways of critically reflecting and evaluating the findings of the research papers presented in this Special Issue, as well as pointing to ways of improving research design.