A depth of data : research messages on the state of social work education in England

In the light of extensive media coverage of social work education, this article uses information from the Department of Health funded three-years multi-method evaluation of the social work degree qualification in England to discuss areas in which qualifying education might be improved. It argues that too great a concern with the 'A' level performance of social work applicants risks not paying enough attention to the non-academic qualities that they will need to work in the changing world of children's and adult services. Better partnership working between employers and universities will help students make the transition into the workplace. This includes greater opportunities for employers and practitioners to be involved in candidate selection and teaching on qualifying programmes.

Compute inclusion depth of a pattern

We define a concept of inclusion depth (see Definition 1) to capture mind-change complexity [3,1] of pattern identification problems [2]. Our basic question is whether the inclusion depth for any pattern is computable. We conjecture a combinatorial characterization that, if true, leads to a linear time algorithm to compute inclusion depth.

Determination of embedment depth of timber poles and piles using wavelet transform

This paper presents an investigation on the wave propagation in timber poles with Wavelet Transform (WT) analysis for identification of the condition and underground depth of embedded timber poles in service. Most of non-destructive testing (NDT) applications for timber poles using wave-based methods consider only single wave mode and no dispersion. However, for wave propagations in timber poles (damaged/undamaged), such simplification may not be correct, especially for broad band excitation using impulse impact. To investigate the problem, a 5m timber pole was investigated numerically and experimentally. A dispersion curve is generated from the numerical results to provide guidance on the velocity and wave mode selection. Continuous wavelet transform (CWT) is applied on the same signal to verify the presence of modes and to process data from experimental testing. The results are presented in both time domain and time-frequency domain for comparison. The results of the investigation showed that, wavelet transform analysis can be a reliable signal processing tool for NDT in terms of condition and embedment length determination.

The implications of lung-regulated buoyancy control for dive depth and duration

Among air-breathing divers, control of buoyancy through lung volume regulation may be most highly developed in marine turtles. In short, the turtle lung may serve a dual role as both an oxygen store and in buoyancy control. A simple model is developed to show that, for turtles diving up to the maximum depth at which they can still use their lungs to attain neutral buoyancy, the total oxygen store will increase greatly with dive depth, and hence a corresponding increase in dive duration is predicted. Time–depth recorders attached to free-living green turtles (Chelonia mydas) at Ascension Island confirmed a marked increase in dive duration with depth, with the gradient of this relationship being >10 times that seen in diving birds and mammals. Consistent with the prediction that the lungs serve a dual role, we found that, when lead weights were added to some turtles to increase their specific gravity, the mean depth of dives decreased, but for dives to the same depth, weighted animals dived for longer. The depth distribution of green turtles seems to be generally constrained by the maximum depth at which they can still attain close to neutral buoyancy.

Variation in the fatty acid composition of the blubber in Cape fur seals (Arctocephalus pusillus pusillus) and the implications for dietary interpretation

Analysis of the fatty acid (FA) composition of blubber is a valuable tool in interpreting the diet of marine mammals. This technique is based on the principle that particular FA present in prey can be incorporated largely untransformed into predator adipose tissue stores, thereby providing biochemical signatures with which to identify prey species. Several studies of phocid seals and cetaceans have documented vertical stratification in the FA composition of blubber such that inferences about diet may vary greatly depending on the layer of the blubber that is analysed. It is not known whether blubber in otariid seals (fur seals and sea lions) also displays vertical stratification in FA composition. Furthermore, it is not known whether the FA composition of blubber is uniform in these species. In the present study, the vertical and regional variation in FA composition of blubber was investigated in seven adult female Cape fur seals (Arctocephalus pusillus pusillus). The proportion of monounsaturated fatty acids (MUFA) was greater in the outer (43.6±1.3%) than inner portion (40.9±1.2%; t20=5.59, P<0.001) whereas the proportions were greater in the inner than outer portions for saturated fatty acids (23.6±0.5% and 21.9±0.6%, respectively, t20 = 5.31, P<0.001) and polyunsaturated fatty acids (PUFA, 35.5±0.7% and 34.5±0.7%, respectively, t20 = 3.81, P < 0.001). There was an inverse relationship between MUFA and PUFA in the blubber, independent of sampling location. In addition, with the exception of the inner portion from non-lactating females, blubber from the mammary area had the highest proportions of 18:1ω9c and total MUFA, followed by blubber from the rump and neck, suggesting that the deposition and mobilisation of blubber lipids may not be uniform around the body in otariid seals. These results support the need for blubber tissue to be sampled from the same site on animals, and to the full depth of the blubber layer, to minimise variation in FA profiles that could occur if different sites and depths were sampled. Such standardisation of sampling will further aid in interpreting diet in otariid seals using the FA Signature Analysis approach.

Departmental advisers as official interpreters : torchbearers and holders of official knowledge

The work undertaken by departmental advisers who assist teachers to implement particular state education policies such as syllabus and curriculum documents is the focus of this paper. The author's doctoral thesis involved an analysis of the interactions between teachers, the texts of the Queensland English Syllabus, and two women who worked as 'official interpreters' guiding teachers in their uses of the texts. This paper examines the complex positions taken up by these interpreters. On the one hand, their expertness is demonstrated by the official knowledge they hold and by the torchbearing work they do with teachers. But on the other hand, the choices and selections made during this torchbearing work are governed by the interpreters' regulation by the discourses surrounding their official knowledge. The research undertaken on these interpreters' work informs the author's final call to recognise the complexity surrounding implementations of new curriculum and syllabus documents. Such recognition would include making use of the departmental advisers' expertness and depth of knowledge in particular curriculum areas in innovative and collegial projects crossing over traditional boundaries between academic research and teachers' practices.

Issues arising from the implementation of a comprehensive assessment approach in a large, multi-modal Bachelor of Commerce Unit

Recent literature in higher education argues university assessment has been too narrow and hasn’t adequately reflected the quality, breadth and depth of students’ learning. Research shows students often prioritise and learn what they need to know for formal, graded assessment and disregard other academic content seen as less relevant to those requirements. The predominance of essays and examinations has therefore tended to constrain learning. The case for a more comprehensive approach has been clearly articulated. So what happens when staff take up the unique challenge of designing fair and uniform assessment for a large, core, multi-modal, multi-campus unit offered nationally and internationally?
When developing an undergraduate Bachelor of Commerce unit at Deakin University, staff considered the most appropriate ways to assess a range of conceptual understandings and communication skills. This resulted in the mapping and adoption of a comprehensive approach incorporating teacher, peer, and self-assessment aspects, individual and group work, oral and written presentations, and the use of portfolios and journals. Particular practices were adopted to control workloads, ensure fairness in marking, and overcome some problems generally associated with group work. When implementing the approach, practical issues arose that demanded adjustments. This paper details the approach taken, outlines research activities, and discusses the practical implications of issues that arose.

Foraging behaviour and habitat utilisation of Australasian gannets determined using GPS loggers

Australasian gannets (Morus serrator) breed in the cool temperate waters of south-eastern Australia and also at several localities around New Zealand, where they are a major marine predator feeding on commercially-exploited pelagic fish. This study investigated the foraging behaviour and habitat utilization of gannets at Pope’s Eye Marine Reserve during the 2005-2005 breeding period using GPS-depth-loggers. GPS data were recorded for a total of 45 foraging trips from 20 individuals. Gannets were found to forage at average maximum distances of 52.7 km (± 29.6 km) from the colony, with total foraging path lengths of 177.1 km (± 93.4 km) and foraging trip durations of 16.5 h (± 9.9 h). During foraging trips gannets spent on average 31.5% (± 11.4) of the time flying at an average flight speed of 47.3 km h-1 (± 2.9 km h-1). Gannets made an average of 39.8 (± 35.2) dives per trip and 3.8 (± 5.6) dives per daylight hour. Dives had an average depth of 3.5 m (± 1.1 m) and a mean maximum depth of 7.0 m (± 3.0 m), lasting for a mean dive duration of 5.3 sec (± 1.3 sec). Gannets foraged predominantly in shallow coastal waters and there was some evidence for foraging site fidelity. Considerable individual variation in foraging strategies was also observed. The results highlight the potential of GPS technology to reveal the fine-scale foraging behaviour of marine predators, thereby improving our understanding the interaction between marine predator populations, commercially exploited fish stocks and the marine environment.

Development of a model to explain the sexual beliefs, intentions and behaviours of adolescents and young adults

In the last thirty years there have been many research studies which have examined the reasons why adolescents and young adults engage in sexual behaviours. Most of these studies have lacked a theoretical basis, Consequently there are many links made between variables, but no consistency across studies, or attempts to develop an underlying theory to explain the results. However, there have been theoretical models developed to explain adolescents’ and young adults’ sexual decision making. Unfortunately, many of these models have not been empirically validated. This thesis attempts to address these deficiencies in the literature by utilising a theory of behaviour and applying it to adolescent and young adult sexual decision making. This theory is the Theory of Planned Behaviour (TPB). Two longitudinal studies were conducted to examine the utility of an adaptation of the TPB to sexual decision making among adolescents and young adults. In the first study 58 adolescent males, aged between 14 years and 18 years participated in a longitudinal study using a questionnaire adapted from the Depth of Sexual Involvement Scale. In the second study, 194 young adults (156 female, 38 male) aged between 18 years and 21 years participated in a similar study. The first study found that intention to engage in behaviour was well predicted, although some of the variables in the model, did not in fact, contribute significantly to the prediction. The prediction of behaviour was less strong than that of intention. Study two found that intention to engage in behaviours was well predicted by the model. However, the degree to which intention led to behaviour was not well predicted. Overall, the results of these studies suggest that the TPB is a good theoretical basis from which to launch a systematic and theoretically informed explanation of adolescent and young adult sexual decision making. However, other factors may need to be added to the model to fully describe the decision making process and accurately predict behaviour. Suggestions are made for future research, as well as interventions that may arise as more knowledge is gathered using this paradigm.

Issues arising from the implementation of a comprehensive assessment approach in a large, multi-modal Bachelor of Commerce unit

Recent literature in higher education argues university assessment has been too narrow and hasn’t adequately reflected the quality, breadth and depth of students’ learning. Research shows students often prioritise and learn what they need to know for formal, graded assessment and disregard other academic content seen as less relevant to those requirements. The predominance of essays and examinations has therefore tended to constrain learning. The case for a more comprehensive approach has been clearly articulated. So what happens when staff take up the unique challenge of designing fair and uniform assessment for a large, core, multi-modal, multi-campus unit offered nationally and internationally?

When developing an undergraduate Bachelor of Commerce unit at Deakin University, staff considered the most appropriate ways to assess a range of conceptual understandings and communication skills. This resulted in the mapping and adoption of a comprehensive approach incorporating teacher, peer, and self-assessment aspects, individual and group work, oral and written presentations, and the use of portfolios and journals. Particular practices were adopted to control workloads, ensure fairness in marking, and overcome some problems generally associated with group work. When implementing the approach, practical issues arose that demanded adjustments. This paper details the approach taken, outlines research activities, and discusses the practical implications of issues that arose.

Assessment of machining characteristics of austempered ductile iron

Austempered Ductile Iron (ADI) is a modified Spheroidal Graphite Iron (SGI) produced by applying a two-stage heat treatment cycle of austenitising and austempering. The microstructure of ADI also known as "ausferrite" consists of ferrite, austenite and graphite nodules. Machining ADI using conventional techniques is often problematic due to the microstructural phase transformation from austenite to martensite. Machining trials consisted of drilling ADI-Grades900, 1050, 1200 and 1400 using inserted (TiAlN PVD coated) type drills. The cutting parameters selected were; cutting speeds [m/min] of 30 and 40; penetration rates [mm/rev] of 0.1 and 0.2; to a constant depth of 20mm. The machining characteristics of ADI are evaluated through surface texture analysis and microhardness analysis. These results indicate that microhardness is modified during machining and surface texture is improved using a cutting fluid.

Histological and global gene expression analysis of the ‘lactating’ pigeon crop

Background: Both male and female pigeons have the ability to produce a nutrient solution in their crop for the nourishment of their young. The production of the nutrient solution has been likened to lactation in mammals, and hence the product has been called pigeon ‘milk’. It has been shown that pigeon ‘milk’ is essential for growth and development of the pigeon squab, and without it they fail to thrive. Studies have investigated the nutritional value of pigeon ‘milk’ but very little else is known about what it is or how it is produced. This study aimed to gain insight into the process by studying gene expression in the ‘lactating’ crop.
Results: Macroscopic comparison of ‘lactating’ and non-’lactating’ crop reveals that the ‘lactating’ crop is enlarged and thickened with two very obvious lateral lobes that contain discrete rice-shaped pellets of pigeon ‘milk’. This was characterised histologically by an increase in the number and depth of rete pegs extending from the basal layer of the epithelium to the lamina propria, and extensive proliferation and folding of the germinal layer into the superficial epithelium. A global gene expression profile comparison between ‘lactating’ crop and non-’lactating’ crop showed that 542 genes are up-regulated in the ‘lactating’ crop, and 639 genes are down-regulated. Pathway analysis revealed that genes up-regulated in ‘lactating’ crop were involved in the proliferation of melanocytes, extracellular matrix-receptor interaction, the adherens junction and the wingless (wnt) signalling pathway. Gene ontology analysis showed that antioxidant response and microtubule transport were enriched in ‘lactating’ crop.
Conclusions: There is a hyperplastic response in the pigeon crop epithelium during ‘lactation’ that leads to localised cellular stress and expression of antioxidant protein-encoding genes. The differentiated, cornified cells that form the pigeon ‘milk’ are of keratinocyte lineage and contain triglycerides that are likely endocytosed as very low density lipoprotein (VLDL) and repackaged as triglyceride in vesicles that are transported intracellularly by microtubules. This mechanism is an interesting example of the evolution of a system with analogies to mammalian lactation, as pigeon ‘milk’ fulfils a similar function to mammalian milk, but is produced by a different mechanism.

Wear characteristics of ultra-hard cutting tools when machining austempered ductile iron

Nodularised Ductile Cast Iron, when subjected to heat treatment processes - austenitising and austempering produces Austempered Ductile Iron (ADI). The microstructure of ADI also known as "ausferrite" consists of ferrite, austenite and graphite nodules. Machining ADI using conventional techniques is often a problematic issue due to the microstructural phase transformation from austenite to martensite during machining. This paper evaluates the wear characteristics of ultra hard cutting tools when machining ADI and its effect on machinability. Machining trials consist of turning ADI (ASTMGrade3) using two sets of PCBN tools with 90% and 50% CBN content and two sets of ceramics tools; Aluminium Oxide Titanium Carbide and Silicon Carbide - whisker reinforced Ceramic. The cutting parameters chosen are categorized as roughing and finishing conditions; the roughing condition comprises of constant cutting speed (425 m/min) and depth of cut (2mm) combined with variable feed rates of 0.1, 0.2, 0.3 and 0.4mm/rev. The finishing condition comprises of constant cutting speed (700 m/min) and depth of cut (0.5mm) combined with variable feed rates of 0.1, 0.2, 0.3 and 0.4mm/rev. The benchmark condition to evaluate the performance of the cutting tools was tool wear evaluation, surface texture analysis and cutting force analysis. The paper analyses thermal softening of the workpiece by the tool and its effect on the shearing mechanism under rough and finish machining conditions in term of lower cutting forces and enhanced surface texture of the machined part.