Linshuichonetes gen. nov., a new rugosochonetid (Brachiopoda) genus from the Liangshan Formation (Early Permian) in Sichuan, China, and its ecology

A new genus and species, Linshuichonetes elfinis, belonging to the Rugosochonetidae, is described from the Early Permian (Late Artinskian or early Kungurian) Liangshan Formation of the Yangtze block. The new genus is defined externally by the presence of fine, but delayed, capillation and a weak or absent median sulcus and fold and by the presence of a distinct posteromedian sinus on the ventral umbo; and internally by a lack of median, lateral and accessory septa in the dorsal interior; absence of vascular trunks in the ventral interior and the presence of distinct radiating rows of papillae in the interior of both valves, particularly an unusual clustered arrangement of papillae on the posteromedian portion of the dorsal interior. The local environment during the deposition of the Liangshan Formation appears to have been a restricted tidal flat or lagoon which experienced frequent sealevel fluctuations associated with the onset of the Yanghsingian transgression. The new species, L. elfinis, appears to have several morphological adaptations enabling successful exploitation of this environment. It was typically a very small and thin-valved species with a high surface area to volume ratio, an advantage in an oxygen restricted environment. The small size and numerous body spinules would have aided individuals to remain suspended at the top of the fine, soft substrate. It also dominated the brachiopod assemblage in the Liangshan Formation, comprising up to 94%of specimens within a bed. These factors indicate that the new species appears to be an opportunistic species.

Effect of yarn hairiness on energy consumption in rotating a ring-spun yarn package

The effect of yarn hairiness on energy consumption when rotating a ring-spun yarn package is investigated theoretically and experimentally. A theoretical model is developed to calculate the energy required to rotate hair fibers, based on hair length and number as well as package speed and size. A single spindle test rig is used to verify the theoretical prediction. The experimental results confirm the theoretical prediction that the package power increases with increased yarn hairiness level and spindle speed.

Minimizing energy consumption of yarn winding in ring spinning

Ring spinning has been and will continue to be an important system for making staple yarns from different fibers in the textile industry. But high power consumption and low productivity remain the two outstanding problems with ring spinning. Based on an analysis of power distribution during yarn winding in ring spinning, models for the ratio of energy consumption to yarn production over a full yarn package are established. Spindle speed, yarn count, and package diameter are the three key parameters affecting this ratio. The effects on energy consumption of these parameters are discussed through a case study. The energy-to-production ratio increases with increased package diameter but decreases with increased spindle speed and/or yarn count (tex). The results will help guide spinners in minimizing energy consumption in ring spinning.

Distribution of power requirements during yarn winding in ring spinning

A model of a yam package is established for a ring spinning system. The yarn layer, surface area, and mass of the yam package are formulated with respect to the diameters of the empty bobbin and full yarn package, yarn count, and yarn winding-on time. Based on the principles of dynamics and aerodynamics, models of the power requirements for overcoming the skin friction drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn), and overcoming the yarn wind-on tension are developed. The skin friction coefficient on the surface of a rotating yam package is obtained from experiment. The power distribution during yam packaging is discussed based on a case study. The results indicate that overcoming the skin friction drag during yarn winding consumes the largest amount of energy. The energy required to overcome the yarn wind-on tension is also significant.

Skin friction coefficient on a yarn package surface in ring spinning

The skin friction coefficient on the surface of a rotating yarn package affects the power required to drive the package. This paper examines the relationship between the skin friction coefficient on the package surface and its diameter and rotating speed, based on the fundamentals of aerodynamics and the experimental results of power consumption. Skin friction coefficients on the surfaces of an airplane, car top, and yarn package are discussed. The results indicate that the skin friction coefficient on the package surface without hairiness depends on the package diameter and spindle speed only. The skin friction coefficient on the yarn package surface is about three times that on the top surface of a car, and is about twenty times that on an airplane surface. The power consumed to overcome skin friction drag is more than that consumed to drive the spindle if the spindle speed is very slow. However, the situation reverses when the spindle speed is fast.

An experimental investigation of yarn tension in simulated ring spinning

Yarn tension is a key factor that affects the efficiency of a ring spinning system. In this paper, a specially constructed rig, which can rotate a yarn at a high speed without inserting any real twist into the yarn, was used to simulate a ring spinning process. Yarn tension was measured at the guide-eye during the simulated spinning of different yarns at various balloon heights and with varying yarn length in the balloon. The effect of balloon shape, yarn hairiness and thickness, and yarn rotating speed, on the measured yarn tension, was examined. The results indicate that the collapse of balloon shape from single loop to double loop, or from double loop to triple etc, lead to sudden reduction in yarn tension. Under otherwise identical conditions, a longer length of yarn in the balloon gives a lower yarn tension at the guide-eye. In addition, thicker yarns and/or more hairy yarns generate a higher tension in the yarn, due to the increased air drag acting on the thicker or more hairy yarns.

An investigation of yarn snarling and balloon flutter instabilities in ring spinning

This article reports theoretical and experimental investigation on yarn snarling and balloon fluttering in ring spinning. Yarn snarling and balloon fluttering affect yarn breakage in ring spinning. The theoretical model has incorporated the tangential component of air drag on a ballooning yarn, which was ignored in previous models. The results show that yarn snarling happens in the balloon when the ratio of yarn length in the balloon to balloon height is greater than a specific value that depends on the yarn type and count. Yarn tension experiences an obvious change before and after yarn snarling. The balloon flutter appears between normal balloons while the balloon loops are changing. Fluttering balloon shapes that oscillate periodically between two and three loop configurations as yarn tension varies periodically have also been observed experimentally.

The effect of yarn hairiness on air drag in ring spinning

Air drag on yarn and package surfaces affects yarn tension, which in turn affects energy consumption and ends-down in ring spinning. This study investigated the effects of yarn hairiness on air drag in ring spinning. Theoretical models of skin friction coefficient on the surface of rotating yarn packages were developed. The predicted results were verified with experimental data obtained from cotton and wool yarns. The results show that hairiness increases the air drag by about one-quarter and one-third for the rotating cotton and wool yarn packages, respectively. In addition, yarn hairiness increases the air drag by about one-tenth on a ballooning cotton yarn.

Simulation and experimental validation of a ring spinning process

Ring spinning is the most important system of making high quality yarns in the textile industry. Yarn tension affects yarn breakage, which in turn affects yarn productivity in ring spinning. Accurate information about how various spinning parameters affect yarn tension is essential for the optimisation of the ring spinning process. In this paper, a program to simulate the ring spinning process was developed using MATLAB, which can predict yarn tension under given spinning conditions. The simulation results were verified with experimental results obtained from ring spinning cotton and wool yarns.

Recent studies on yarn tension and energy consumption in ring spinning

High energy consumption remains a key challenge for the widely used ring spinning system. Tackling this challenge requires a full understanding of the various factors that contribute to yarn tension and energy consumption during ring spinning. In this paper, we report our recent experimental and theoretical research on air drag, yarn tension and energy consumption in ring spinning. A specially constructed rig was used to simulate the ring spinning process; and yarn tension at the guide-eye was measured for different yarns under different conditions. The effect of yarn hairiness on the air drag acting on a rotating yarn package and on a ballooning yarn was examined. Models of the power requirements for overcoming the air drag, increasing the kinetic energy of the yarn package (bobbin and wound yarn) and overcoming the yarn wind-on tension were developed. The ratio of energy-consumption to yarn-production over a full yarn package was discussed. A program to simulate yarn winding in ring spinning was implemented, which can generate the balloon shape and predict yarn tension under a given spinning condition. The simulation results were verified with experimental results obtained from spinning cotton and wool yarns.

Exploiting operating system services to efficiently checkpoint parallel applications in GENESIS

Recent research efforts of parallel processing on non-dedicated clusters have focused on high execution performance, parallelism management, transparent access to resources, and making clusters easy to use. However, as a collection of independent computers used by multiple users, clusters are susceptible to failure. This paper shows the development of a coordinated checkpointing facility for the GENESIS cluster operating system. This facility was developed by exploiting existing operating system services. High performance and low overheads are achieved by allowing the processes of a parallel application to continue executing during the creation of checkpoints, while maintaining low demands on cluster resources by using coordinated checkpointing.

An analysis of update ordering in a cluster of replicated servers

This paper analyses update ordering and its impact on the performance of a cluster of replicated servers. We propose a model for update orderings and constraints and develop a number of algorithms for implementing different ordering constraints. A performance study is then carried out to analyse the update ordering model.

A co-recommendation algorithm for web searching

This paper presents an approach called the Co-Recommendation Algorithm, which consists of the features of the recommendation rule and the co-citation algorithm. The algorithm addresses some challenges that are essential for further searching and recommendation algorithms. It does not require users to provide a lot of interactive communication. Furthermore, it supports other queries, such as keyword, URL and document investigations. When the structure is compared to other algorithms, the scalability is noticeably easier. The high online performance can be obtained as well as the repository computation, which can achieve a high group-forming accuracy using only a fraction of Web pages from a cluster.