Anaerobic treatment of juice and fruit-processing effluents

Effluents from the juice and fruit processing industries have high organic matter content. Discharge of these effluents without appropriate treatment would therefore have a negative impact on the environment. High organic contents and low contamination levels make such effluents suitable for biological treatment, especially anaerobic digestion. In the latter process, significant amounts of digester gas can be produced, turning a waste stream into a source of renewable energy that can be used for electricity and heat production, leading to financial benefits.This paper investigates the feasibility of anaerobic digestion and the gas generation potential of five different effluents from the carrot-juice, orange-juice and sultana processing industries. Benefits are assessed in terms of digester gas production and organic matter reduction. The results show that the specific gas production ranges between 665 and 860 m3 per tonne of effluent treated (as organic dry matter). Furthermore, nearly 100% of the organic matter is converted into gas in the case of the carrot- and orange-juice processing residues, while a 84.5% reduction of the organic matter was found to be achievable in the case of the sultana wastes. While these results are promising, further testing will be required to validate them in a larger scale.

Measuring health in a vacuum: examining the disability weight of the DALY

The Disability Adjusted Life Year (DALY) is a widely used summary measure of population health combining years of life lost due to mortality and years of healthy life lost due to disability. A feature of the DALY is that, in the assessment of morbidity, each health condition is associated with a disability weight. The disability weight lies on a scale between 0 (indicating the health condition is equivalent to full health) and 1 (indicating the health condition is equivalent to death). The disability weight associated with each health condition is currently fixed across all social, cultural and environmental contexts. Thus blindness in the United Kingdom has the same disability weight as blindness in Niger in spite of structural interventions in the UK that make the disability less severe than in Niger. Although the fixed disability weight is defended on grounds that it supports a strongly egalitarian flavour in the DALY, we argue that the lack of consideration of realistic contexts results in a measure that will underestimate the burden associated with morbidity in disadvantaged populations and overestimate the burden in advantaged populations. There is, consequently, a loss of information on possible non-clinical points of intervention. Disaggregated estimates of the burden of disease such as those in the World Health Report 2000 should be interpreted with caution.

Influence of chromium content on the dry machining performance of cathodic arc evaporated TiA1N coatings

Physical vapour deposition (PVD) titanium aluminium nitride coated cutting tools are used extensively in global manufacturing for reducing production costs and improving productivity in a number of aggressive metal-cutting operations, namely, dry and high-speed machining. In this investigation, the performance of Ti1−xAlxN and Ti1−x−yAlxCryN coatings was assessed on Co-HSS twist drills used to machine grey cast iron. The failure criterion for drills was defined as a critical sized flank wear land at the outer corners of the drills. Using this criterion, the average tool life of uncoated twist drills was increased by factors of 2.5, 3.0 and 3.0 by Ti0.59Al0.41N, Ti0.27Al0.19Cr0.54N and Ti0.21Al0.14Cr0.65N coatings, respectively. Notwithstanding the similar increase in average tool life, the Ti1−x−yAlxCryN coatings produced more consistent results than the Ti1−xAlxN coated drills with standard deviations of 67, 3 and 19 holes, respectively. This result has significant practical implications in manufacturing, since drills are not replaced on an individual basis, but rather on a preset tool change frequency. The present paper discusses the performance of Ti1−xAlxN and Ti1−x−yAlxCryN coated drills in terms of average and practical drill life and concludes with remarks on the characterisation of PVD coatings and their significance on the performance of Co-HSS twist drills when dry machining grey cast iron.

The weight of the thing left its mark

The weight of the thing left its mark imagines and abstracts a domestic situation where the relationships are under constant negotiation and held by what has been left unsaid. Framed by the unexpected use of kitchen cutlery the performance has a loosely knit structure that makes the dancing immediate and the quality of attention very alive.

The weight of the thing left its mark

The weight of the thing left its mark frames improvised dancing through relationships between the dancers, a live soundscape and the uses of masses of cutlery. The simple, evocative design of the space alludes to farmhouse domesticity, but the atmosphere is taught as the dancers negotiate the psychological and physical interactions that determine their improvisations.

Mohair research update 18 : the importance of the live weight of Angora goats on husbandry and production

The live weight of farm animals is strongly associated with production, profitability, management requirements and animal survival (Table 1). The mature live weight of farm animals and of goats is positively associated with their potential to grow rapidly. Live weight is directly related to the nutrient requirements of goats, irrespective of their productive state.

For Angora goats in particular, live weight is associated with mohair production and mohair fibre diameter, age at puberty, reproductive performance and ovulation rate, carcass attributes, meat production and sale value at the end of their productive life. Live weight also affects the timing of the eruption of incisor teeth.

Identification of 100 fundamental ecological questions

Fundamental ecological research is both intrinsically interesting and provides the basic knowledge required to answer applied questions of importance to the management of the natural world. The 100th anniversary of the British Ecological Society in 2013 is an opportune moment to reflect on the current status of ecology as a science and look forward to high-light priorities for future work. To do this, we identified 100 important questions of fundamental importance in pure ecology. We elicited questions from ecologists working across a wide range of systems and disciplines. The 754 questions submitted (listed in the online appendix) from 388 participants were narrowed down to the final 100 through a process of discussion, rewording and repeated rounds of voting. This was done during a two-day workshop and thereafter. The questions reflect many of the important current conceptual and technical pre-occupations of ecology. For example, many questions concerned the dynamics of environmental change and complex ecosystem interactions, as well as the interaction between ecology and evolution. The questions reveal a dynamic science with novel subfields emerging. For example, a group of questions was dedicated to disease and micro-organisms and another on human impacts and global change reflecting the emergence of new subdisciplines that would not have been foreseen a few decades ago. The list also contained a number of questions that have perplexed ecologists for decades and are still seen as crucial to answer, such as the link between population dynamics and life-history evolution. Synthesis. These 100 questions identified reflect the state of ecology today. Using them as an agenda for further research would lead to a substantial enhancement in understanding of the discipline, with practical relevance for the conservation of biodiversity and ecosystem function.

Trajectories of intensity. Looking at structured improvisation in 'the weight of the thing left its mark'

This article examines the intentions and implications of ‘structured improvisation’ in relation to my work 'The weight of the thing left its mark' performed in Melbourne in April 2009. The performance piece is premised on the dancers maintaining a performance improvisation practice but to frame these and add predetermined context as a choreographic overlay. In so doing the aim was to create spaces within the work where improvisation could authentically exist while striving for a definable and repeatable ‘work’. The presentation will examine some of the complexities and difficulties inherent in this aim and grapples with the different expectations and conflicts that exist between performance improvisation and choreography.

Dry sliding wear of active screen plasma carburised austenitic stainless steel

Low temperature diffusion treatments with nitrogen and carbon have been widely used to increase the tribological performance of austenitic stainless steels. These processes produce a layer of supersaturated austenite, usually called expanded austenite or S-phase, which exhibits good corrosion and wear resistance. The novel active screen technology is said to provide benefits over the conventional DC plasma technology. The improvements result from the reduction in the electric potential applied to the treated components, and the elimination of such defects and processing instabilities as edge effects, hollow cathode effects and arcing. In this study, AISI 316 coupon samples were plasma carburised in DC and active screen plasma furnaces. The respective layers of carbon expanded austenite were characterised and their tribological performance was studied and compared. Detailed post-test examinations included SEM observations of the wear tracks and of the wear debris, EDX mapping of the wear track, EBSD crystal orientation mapping of the cross sections of the wear tracks, and cross-sectional TEM. Based on the results of wear tests and post-test examinations, the wear mechanisms involved are discussed.

Dietary assimilation and the digestive strategy of the omnivorous anomuran land crab Birgus latro (Coenobitidae).

On Christmas Island, Indian Ocean, the diet of robber crabs, Birgus latro (Linnaeus) was generally high in fat, storage polysaccharides or protein and largely comprised fruits, seeds, nuts and animal material. The plant items also contained significant amounts of hemicellulose and cellulose. In laboratory feeding trials, crabs had similar intakes of dry matter when fed artificial diets high in either fat or storage polysaccharide, but intake was lower on a high protein diet. Assimilation coefficients of dry matter (69–74%), carbon (72–81%), nitrogen (76–100%), lipid (71–96%) and storage polysaccharide (89–99%) were high on all three diets. B. latro also assimilated significant amounts of the chitin ingested in the high protein diet ( 93%) and hemicellulose (49.6–65%) and cellulose (16–53%) from the high carbohydrate and high fat diets. This is consistent with the presence of chitinase, hemicellulase and cellulase enzymes in the digestive tract of B. latro. The mean retention time (27.2 h) for a dietary particle marker (⁵⁷Co-labelled microspheres) was longer than measured in leaf-eating land crabs. The feeding strategy of B. latro involves the selection of highly digestible and nutrient-rich plant and animal material and retention of the digesta for a period long enough to allow extensive exploitation of storage carbohydrates, lipids, protein and significant amounts of structural carbohydrates (hemicellulose, cellulose and chitin).