Simulation of contact pressure in sheet metal trimming/blanking process

In the car body stamping process, trim/blank die cutting edges are subjected to very high tribological loads that result in loss of tool material from both the punch and die cutting edges. According to Archard’s wear model, normal contact force and sliding distance directly affects the wear. Therefore, knowledge of the acting forces on local contact areas has a pivotal role towards the prediction of tool wear. This paper presents a finite element modelling approach to determining the contact pressure distribution on the tool cutting edges during a trimming/blanking process. Characteristic areas on sheared edge profile, variation of punch force and high contact pressures affected areas have also been analysed.

Adhesion performance of polymer nanofibres under shear loading

Geckos have extraordinary wall-climbing ability because of the millions of hairs with micro/nano fibrillar structures on their feet. Mimicking gecko's feet is of scientific and engineering importance for development of physical adhesion materials and devices. The design of gecko-inspired physical adhesives seems to be geometry dominated. In this study, Finite Element Method (FEM) has been used to analyse the vertical peel-off force of polyporpylene (PP) nanofibres having different fibre dimensions, inclining angels and contact areas on a flat glass substrate. It has been found that the main parameters affecting the frictional adhesion are fibre diameter and fibre aspect ratio, the inclining angle between the fibre and the substrate surface, and the intimate contact areas. Our analysis has shown that PP nanofibres with a diameter of less than 200nm can generate less peel-off force than fibres of larger diameters, indicating more stable adhesion with the glass substrate for thinner fibres. A bent fibre with more intimate contact area can bear more shear force than a straight fibre with less contact area. Also, under the same shear loading, fibres with an inclining angle of less than 30° provide a low peel off force.

Electrospun spinel LiNi0.5Mn1.5O4 hierarchical nanofibers as 5 v cathode materials for lithium-ion batteries

Spinel LiNi0.5Mn1.5O4 hierarchical nanofibers with diameters of 200–500 nm and lengths of up to several tens of micrometers were synthesized using low-cost starting materials by electrospinning combined with annealing. Well-separated nanofiber precursors impede the growth and agglomeration of Li-Ni0.5Mn1.5O4 particles. The hierarchical nanofibers were constructed from attached LiNi0.5Mn1.5O4 nanooctahedrons with sizes ranging from 200 to 400 nm. It is proven that these Li-Ni0.5Mn1.5O4 hierarchical nanofibers exhibit a favorable electrochemical performance. At a 0.5C (coulombic) rate, it shows an initial discharge capacity of 133 mAhg_1 with a capacity retention over 94% after 30 cycles. Even at 2, 5, 10, and 15C rates, it can still deliver a discharge capacity of 115, 100, 90, and 80 mAhg_1, respectively. Compared with self-aggregated nanooctahedrons synthesized using common sol–gel methods, the LiNi0.5Mn1.5O4 hierarchical nanofibers exhibit a much higher capacity. This is owing to the fact that the self-aggregation of the unique nanooctahedron-in-nanofiber structure has been greatly reduced because of the attachment of nanopolyhedrons in the long nanofibers. This unique microstructured cathode results in the large effective contact areas of the active materials, conductive additives and fully realize the advantage of nanomaterial-based cathodes.

The effective radius and resistance to slippage

This work reveals that parallel gripper flat-jaw configuration affects grasping effectiveness. An important finding is the fact that object grasp reliability is influenced significantly by gripper's ability to develop high resistance to object rotation in the gripper. The concept of effective torque radius, which increases resistance to object rotation in the gripper, is presented here and can be extrapolated to other grasping devices and grasping strategies to improve their reliability and make them more effective. Grippers with full-jaw contact surface and those with discrete contact areas have been investigated using simple experimental setups. Essential mathematical models needed for analytical investigation, based on simple mechanics for full-jaw contact surfaces and discrete-jaw contact surfaces, are presented. These may be useful for gripper jaw design purposes.

A prospective study of the effect of education on non-compliant behaviour in contact lens wear

The contact lens practitioner and patient present a specific case for the study of non-compliance in areas such as hygiene, solution use, appointment attendance and wearing times. Education is one of the factors thought to influence compliance among patients in general health care situations and contact lens practitioners are encouraged to educate patients in the care and maintenance of contact lenses. A prospective, randomized, controlled and double masked study was performed to assess the effect of a‘compliance enhancement strategy’ on levels of compliance among contact lens wearers over twelve months. Eighty experienced contact lens patients were randomly allocated to two experimental groups. A standard level of contact lens instruction was applied to the first group and in addition the compliance enhancement strategy was applied to patients assigned to the second group. The strategy consisted of extra education for patients using a video, booklets, posters, a checklist and a health care contract. Patients were given free supplies of RelMu multipurpose solution and Medalist 38 soft contact lenses IBausch and Lomb, Rochester. New York). Compliance levels were assessed at a twelve month aftercare appointment by demonstration and questionnaire. The results indicate that the compliance enhancement strategy had little significant effect on the compliance levels of the patients to whom it was applied. The population of contact lens wearers were generally very compliant and the contact lenses and care regimen were clinically successful. The possibility that the assessment of non–compliance was not adequately sensitive to highlight small differences in non-compliant, behaviour is discussed. The standard level of eduction applied to this sample of contact lens patients was adequate to ensure generally high levels of compliance with the simple care and maintenance regimen recommended.

Description of a new species of the miniopterus aelleni group (chiroptera: miniopteridae) from upland areas of central and northern Madagascar

Recent molecular genetic work, combined with morphological comparisons, on Malagasy members of the bat genus Miniopterus (Family Miniopteridae), has uncovered a number of cryptic species. Based on recently collected specimens and associated tissues, we examine patterns of variation in M. aelleni, the holotype of which comes from Ankarana in northern Madagascar. Using molecular genetic (mitochondrial cytochrome b) and morphological characters we describe a new species, M. ambohitrensis sp. nov. In northern Madagascar, M. ambohitrensis and M. aelleni are allopatric, but occur in relatively close geographical contact (approximately 40 km direct line distance) with M. ambohitrensis found at Montagne d'Ambre in montane humid forest and M. aelleni sensu stricto at Ankarana in dry deciduous forest. Morphologically, this new taxon is differentiated from M. aelleni based on pelage coloration, external measurements, craniodental differences, and tragus shape. Comparisons using 725 bp of cytochrome b found a divergence of 1.1% within M. aelleni sensu stricto, 0.8% within M. ambohitrensis, and 3.3% between these two clades. The two sister species do not demonstrate acoustical differences based on recordings made in a flight cage. Miniopterus ambohitrensis is known from four localities in the northern and central portions of Madagascar, all from montane regions and across an elevational range from about 800 to 1600 m; its calculated "Extent of occurrence" is 15,143 km². It is possible that this species is at least partially migratory.