Air pollution and infant mortality: evidence from the expansion of natural gas infrastructure

We examine the impact of widespread adoption of natural gas as a source of fuel on infant mortality in Turkey, using variation across provinces and over time in the intensity of natural gas utilisation. Our estimates indicate that the expansion of natural gas infrastructure has resulted in a significant decrease in the rate of infant mortality. Specifically, a one-percentage point increase in natural gas intensity – measured by the rate of subscriptions to natural gas services – would cause the infant mortality rate to decrease by 4%, which would translate into approximately 348 infant lives saved in 2011 alone.

Influence of the geometry of an immersed steel workpiece on mass transfer coefficient in a chemical heat treatment fluidised bed

The mass transfer during carburising in a fluidised bed and in a steel workpiece has been studied experimentally in this work. This involved carburising experiment in an electrically heated fluidised bed at 900–970°C with natural gas and air as the atmosphere. A steel workpiece was designed to provide a range of carbon transfer surfaces of different geometries in the fluidised bed, and the carbon transfer coefficient was measured at these surfaces. The carbon transfer coefficient was determined from the carbon distribution within the diffusion layer of the sample. An empirical relationship of the carbon potential as a function of carburising atmosphere, bed temperature and fluidising velocity was determined, based on the understanding of the mass transfer mechanism and analysis of the experimental results.

Pin on disc wear investigation of nitrocarburised H13 tool steel

Nitrocarburised H13 disks were tested in dry, sliding wear against a stationary ruby ball (pin). Three different 4 h nitrocarburising treatments were compared, using N2/NH3/CO2, N2/NH3/natural gas and N2/NH3 gas mixtures, resulting in compound layers of varying thickness, hardness, porosity and oxide morphology. During mild, oxidative wear, with the formation of abrasive wear debris, the most brittle and oxidised surfaces performed poorly. Polishing to a bright, reflective finish greatly reduced wear. However, the N2/NH3/CO2 sample also frequently maintained a 'very mild' wear regime, owing to the formation of a protective film between the wear surfaces, and resulting in a lowering of the friction coefficient. This treated surface was porous and covered in a complex layer of coarse oxide+epsi-carbonitride. Nitrocarburised samples and wear tracks were characterised by optical microscopy, SEM, atomic force microscopy and stylus profilometry.

Ferritic nitrocarburising of tool steels

Four different tool steel materials, P20, H13, M2 and D2, were nitrocarburised at 570°C in a fluidised bed furnace. The reactive diffusion of nitrogen and carbon into the various substrate microstructures is compared and related to the different alloy carbide distributions. The effect of carbon bearing gas (carbon dioxide, natural gas) on carbon absorption is reported, as well as its influence on compound layer growth and porosity. Partial reduction of Fe3O4 at the surface resulted in the formation of a complex, epsi-nitride containing oxide layer. In H13, carbon was deeply absorbed throughout the entire diffusion zone, affecting the growth of grain boundary cementite, nitrogen diffusivity and the sharpness of the compound layer: diffusion zone interface. When natural gas was used, carbon became highly concentrated in the compound layer, while surface decarburisation occurred with carbon dioxide. These microstructural effects are discussed in relation to hardness profiles, and compound layer hardness and ductility. The surfaces were characterised using glow discharge optical emission spectroscopy, optical and scanning electron microscopy and X-ray diffraction.

Carburising and carbon transfer coefficient in a fluidised bed furnance

The carburising of a steel workpiece with complex geometry in a fluidised bed hasbeen studied experimentally. This involved carburising experiment in an electrically heated fluidised bed at 900 - 970°C with natural gas and air as the atmosphere. The carbon transfer coefficient at the workpiece surface and diffusivity within the workpiece were determined from the carbon distribution within the diffusion layer of the sample. A reverse method and the Levenberg-Marquardt algorithm were used in the calculations. The methodology of the reverses method to extract the carbon transfer coefficient and diffusivity is also discussed in some detail.

A life cycle inventory of aluminium die casting

As part of an ongoing project, a life cycle inventory (LCI) of aluminium high pressure die casting (HPDC) has been collected. This has been conducted from the view of an individual product and also the entire process. The objective of the study was to analyse the process and suggest changes to reduce environmental impacts. One modem aluminium high pressure die casting plant located in Victoria, Australia was evaluated and modelled. Site specific data on energy and materials was gathered and the process was modelled using a typical automotive component. The paper also presents our experience and methodology used in this inventory data collection process from the real industry for LCA purposes. The inventory data collected itself reveals that the HPDC process is energy intensive and as such the major emissions were from the use of natural gas fired furnaces and from the brown coal derived electricity. It is also found the large environmental benefits of using secondary aluminium over primary aluminium in the HPDC process. A detailed LCA is being cal1ied out based on the inventory obtained.

The High Court considers the meaning of “reasonable endeavours”: Electricity Generation Corp v Woodside Energy Ltd

The High Court in Electricity Generation Corp v Woodside Energy Ltd [2014] HCA 7 considered the contractual obligation to use reasonable endeavours. The court decided by a majority of four to one that various sellers of natural gas had complied with their obligation to use reasonable endeavours to supply gas to an electricity generator, despite not actually supplying the gas when the sellers had capacity to do so. The majority judgment provides some useful observations about the use of reasonable endeavours obligations and underscores the court's objective approach to construing commercial contracts.

Monoethanolamine reclamation using electrodialysis

Monoethanolamine (MEA) is the benchmark solvent for the capture of carbon dioxide from both natural gas and flue gas streams. Despite its effectiveness in absorbing CO2, this solvent can react with impurities in the gas stream to form heat stable salts and other degradation products. These impurities can cause problems such as an increase in solvent viscosity and corrosion of the operating units. Thus, a number of approaches have been considered to mitigate the occurrence of these problems. In this paper, the use of electrodialysis as an online MEA reclamation process in a postcombustion CO2 capture facility is investigated. The study shows that high heat stable salts removal can be achieved with a high MEA recovery. However, it is necessary to limit the current density, particularly at lower salt concentrations, to reduce water splitting. The stability of the commercial ion-exchange membranes in the highly alkaline solvent is also investigated. The results show that the membranes are stable upon exposure to 30 wt % MEA for at least 4.5 months.

The destruction of heritage: rock art in the Burrup Peninsula

The destruction of rock art in the Burrup Peninsula, performed by several mammoth industries strategically located in the Peninsula since the 1960s, allows me to analyse the concept of heritage within a global history of art and find meaning in the difficult task of interpreting rock art. The Burrup Peninsula not only hosts the largest rock art site in the world, but also one of the largest deposits of natural gas, iron ore and salt. As a consequence, the land (sacred to the Indigenous people), becomes extremely important in order to sustain the booming economy of Australia. In this difficult negotiation between heritage and progress the rock art is embedded with new meanings and the heritage becomes ephemeral. Failing to include the site in the World Heritage Site list created by UNESCO, the roles of identity and memory are contested by the two groups represented on each side of the debate: on one hand, the Aboriginal Traditional owners and the archaeologists; on the other, the Australian government and the cultural establishment that denies the rock art an aesthetic significance by considering it “primitive” and “archaic”. The debate becomes even more pertinent after realizing that the Australian government has flagged other buildings and natural parks as World Heritage Sites, while the rock art in the Burrup Peninsula is catalogued as national, but not World, Heritage. As a result, the concept of heritage can be defined on several levels: local, regional, national and international.

A study on energy and environmental management techniques used in petroleum process industries

Petroleum process industries are one of the most energy and emission intensive sectors throughout the world.There are natural gas processing plant, crude oils and condensate fractionation plant, liquefied natural gas plantand liquefied petroleum gas plant etc. creates environmental pollution by processing and handling of petroleumproducts. The study critically reviewed and discussed the energy and environmental management includingpollution control of petroleum process industries of Bangladesh. They produce both gaseous (process gas, wastegas etc.) and liquid (produced water, waste oil and grease etc.) pollutants. The study found that the liquid pollutantlike waste water is more hazardous and its treatment process is highly complicated due to its higher salinity, morecorrosivity and grease contain characteristics. As part of energy management, the rational use of energy and energyflow diagram of the petroleum industry is presented. Finally, a time frame measures which can be implemented inorder to save energy is outlined. The study concluded that the rational use of energy and proper environmentalmanagement are essential for achieving energy and environmental sustainability of process industries.