A principal components analysis of New Zealand Board compostion : factors that influence an export strategy

Principal Topic Internationalisation strategies are important for company expansion because New Zealand, with its four million people, has such a small market. There may or may not exist ”agency costs” in the use of Outside Directors. Ownership patterns may also influence Internationalisation.

Methodology/Key Propositions This study uses Principal Component Analysis both in a grounded theory approach and in a confirmatory approach.

Results and Implications We find evidence that in New Zealand, contrary to some previous research elsewhere, outside Directors actually have less influence on Internationalisation than Inside Directors. Private ownership also seems to have a greater association with Internationalisation than other ownership types. A highly reliable sample of 1989 New Zealand company directors showed that such factors as gender, age and location and even industry sector were irrelevant. Two factors were important in explaining whether a company goes off-shore. These are the size and magnitude of the company as well as the ownership type and role of the CEO. In essence, this study validates New Zealand’s present strategy of ”picking winners”, that is, selecting firms based upon factor components. This study adds strength to that strategy because it identifies the concrete components that should be taken into account when picking companies for special treatment, e.g. export promotion.

Partial least squares and principal components analysis of wine vintage by high performance liquid chromatography with chemiluminescence detection

HPLC with acidic potassium permanganate chemiluminescence detection was employed to analyse 17 Cabernet Sauvignon wines across a range of vintages (1971–2003). Partial least squares regression analysis and principal components analysis was used in order to investigate the relationship between wine composition and vintage. Tartaric acid, vanillic acid, catechin, sinapic acid, ethyl gallate, myricetin, procyanadin B and resveratrol were found to be important components in terms of differences between the vintages.

Design of experiments and springback prediction for AHSS automotive components with complex geometry

With the drive towards implementing Advanced High Strength Steels (AHSS) in the automotive industry; stamping engineers need to quickly answer questions about forming these strong materials into elaborate shapes.
Commercially available codes have been successfully used to accurately predict formability, thickness and strains in complex parts. However, springback and twisting are still challenging subjects in numerical simulations of AHSS components. Design of Experiments (DOE) has been used in this paper to study the sensitivity of the implicit and explicit numerical results with respect to certain arrays ofuser input parameters in the forming ofan AHSS component. Numerical results were compared to experimental measurements of the parts stamped in an industrial production line. The forming predictions of the implicit and explicit codes were in good agreement with the experimental measurements for the conventional steel grade, while lower accuracies were observed for the springback predictions. The forming
predictions of the complex component with an AHSS material were also in good correlation with the respective experimental measurements. However, much lower accuracies were observed in its springback predictions. The number of integration points through the thickness and tool offset were found to be of significant importance, while coefficient of friction and Young's modulus (modeling input parameters) have no significant effect on the accuracy of the predictions for the complex geometry.

Retirement income policy and the taxation of superannuation in Australia

Superannuation is a form of savings for retirement. The savings are invested and earn income, but the proceeds are generally not available until the beneficiary reaches retirement age} The federal government's retirement income policy has three components, two of which relate to superannuation: the age pension, which provides income support to men aged 65 and over and to women aged 62 and over.2 The pension is means tested and does not depend on previous labour force participation or individual contributions; a compulsory superannuation scheme (under the Superannuation Guarantee Charge (Administration) Act 1992 (SGA Act)), which requires contributions to be made by employers on behalf of all employees, whether full-time, part-time or casual;3 and encouragement, through the taxation system, of voluntary contributions to approved superannuation funds.4 In May 2002, the government released a report, the "Intergenerational Report", 5 which identifies issues associated with Australia's ageing population and considers the fiscal implications of those changes. The Report noted that a steadily ageing population is likely to place significant pressure on government finances. It also noted that one of the key priorities for ensuring fiscal sustainability should be "maintaining a retirement income policy that encourages private saving for retirement and reduces the future demand for the Age Pension". 6 The main way the government has sought to encourage that private saving is through the tax system, primarily by the use of tax concessions. Over the past 20 years, however, the taxation of superannuation has grown in an extremely ad hoc manner and is now inequitable, inefficient and overly complex. This article suggests that the taxation of superannuation in Australia is in urgent need of a complete review. The article further asserts that, if an appropriate framework can be devised, changes could be introduced as budgetary pressures allow.

Public perceptions of the causes and prevention of obesity among primary school children

OBJECTIVE: To investigate lay perceptions of the causes and prevention of obesity among primary school children.

DESIGN: A cross-sectional survey of randomly selected sample of adults in a shopping centre.

SUBJECTS: 315 adults in Melbourne, Australia.

MEASUREMENTS: Subjects completed a self-completion questionnaire, in which they rated the importance of 25 possible causes of obesity and the importance of 13 preventive measures on four-point scales: not important; quite important; very important; extremely important. Demographic information about the respondents' age, sex, marital status, education level and parental status was also collected.

RESULTS: The most important reported causes of childhood obesity were related to overconsumption of unhealthy food, parental responsibility, modern technology and the mass media. The most popular prevention activities were associated with specific actions aimed at children. Principal components analysis of the causes data revealed eight factors, provisionally named: parental responsibility, modern technology and media, overconsumption of unhealthy food, children's lack of knowledge and motivation, physical activity environment, lack of healthy food, lack of physical activity and genes. Two prevention factors were also derived, named government action and children's health promotion. Parents saw modern technology and media, and government activities as more important causes, and government policy as a more important means of prevention than nonparents and men. Women's responses tended to be similar to those of parents. There were few educational differences, although nontertiary educated respondents reported that modern technology and media were more important causes of obesity than did the tertiary educated.

CONCLUSION: The findings suggest that the public appears to hold quite sophisticated views of the causes and prevention of children's obesity. They suggest that a number of prevention strategies would be widely supported by the public, especially by parents.

Application of co-operative agents in handling fluctuations in a pull production system

This paper presents the general details of the structure and strategy of a multi-agent system that is being developed to improve the performance of pull (kanban) production control to handle large fluctuations in product demand. Employing a set of generic, heterarchial agents each controlling a single product and co-operating together to ensure that all components, regardless of demand fluctuation, are manufactured on time as per basic kanban principles. Preliminary results indicate that the basic kanban model does not cater for large demand fluctuations and the application of this multi-agent strategy may be beneficial to improving the overall system performance and increase the likelihood that all products will be manufactured on time.

Victorian index of estuary condition : recommended themes and measures

Deakin University was engaged by the Department of Sustainability and Environment to develop an Index of Estuary Condition (IEC) for evaluating the environmental condition of Victorian estuaries. The Index will ultimately complement the existing Index of Stream Condition (ISC) by providing a consistent statewide assessment of the environmental condition of estuaries. This will better enable:

• Estuarine condition to be reported at regional, state and national levels.

• Prioritisation of resource allocation.

• Strategic evaluation of management interventions in estuaries.

Workshops involving participants with expertise in a variety of disciplines were convened to integrate learnings from assessment programs currently being developed interstate and overseas. This report synthesises and builds on the output from those workshops which:

• Identified key components (themes) of estuaries that contribute to estuarine condition.

• Contributed to development of a broad conceptual model for Victorian estuaries

• Identified possible measures of each theme

In keeping with the sub-indices of the ISC, six themes were identified for use in the IEC: Physical form, Hydrology, Water quality, Sediment, Flora and Fauna. Several measures within each theme are recommended to assess estuary condition.

Implementation of particular measures in the IEC partly depends on the investment required to both collect and interpret the required data. With regard to data collection, each measure was assessed according to whether there is an established sampling procedure, how frequently data need to be collected and the level of expertise required for collection and processing. For interpreting the data, measures were scored on whether baseline condition is established and whether descriptions and scores are developed which reflect the extent of deviation from that condition. These scores were used to indicate which measures are feasible to implement immediately and which require further investigation.

A trial of the recommended IEC measures in a selection of estuaries is recommended as it would provide an opportunity to test the measures and their suitability for application statewide. It is suggested that the trial is conducted in estuaries subject to various levels of threats within each of the four estuary classes described by Barton et al. (2008)

Study of the Geelong Local Learning and Employment Network

In common with many Western nations, Australian governments, both state and federal, have increasingly embraced network-based approaches in responding to the effects of globalisation. Since 2001, thirty one Local Learning and Employment Networks (LLEN) have been established across all areas of Victoria, Australia in line with recommendations of a Ministerial Review into Post Compulsory Education and Training Pathways. That review reported that, in the globalised context, youth in transition from schooling to independence faced persistent and severe difficulties unknown to previous generations; it also found problems were frequently concentrated in particular groups and regions. LLEN bring together the expertise and experience of local education providers, industry, community organisations, individuals and government organisations. As a result of their local decisions, collaboration and community building efforts it is intended that opportunities for young people will be enhanced. My research was conducted within an Australian Research Council Linkage Project awarded to Deakin University Faculty of Education in partnership with the Smart Geelong Region LLEN (SGR LLEN). The Linkage Project included two separate research components one of which forms my thesis: a case study of SGR LLEN. My data was generated through participant observation in SGR LLEN throughout 2004 and 2005 and through interviews, reflective writing and archival review. In undertaking my analysis and presenting my thesis I have chosen to weave a series of panels whose orientation is poststructural. This approach was based in my acceptance that all knowledge is partial and fragmentary and, accordingly, researchers need to find ways that highlight the intersections in and indeterminacy of their empirical data. The LLEN is -by its nature as a network -more than the contractual entity that gains funding from government, acts as the administrative core and occupies the LLEN office. As such I have woven firstly the formation and operational structure of the bounded entity that is SGR LLEN before weaving a series of six images that portray the unbounded LLEN as an instance-in-action. The thesis draws its theoretical inspiration from the work of Deleuze and Guattari (1987). Despite increased use of notions of networks, local decision-making and community building by governments there had been little empirical research that explored stakeholder understandings of networks and their role in community building as well as a lack of theorisation of how networks actually ‘work.’ My research addresses this lack and suggests an instituted network can function as a learning community capable of fostering systemic change in the post compulsory education training and employment sector and thereby contributing to better opportunities for young people. However the full potential of the policy is undermined by the reluctance of governments to follow through on the implications of their policies and, in particular, to confront the limiting effects of performativity at all levels.

Psychometric properties of the caregiver assessment of movement participation scale for screening children with development coordination disorders

Using Rasch analysis, the psychometric properties of a newly developed 35-item parent-proxy instrument, the Caregiver Assessment of Movement Participation (CAMP), designed to measure movement participation problems in children with Developmental Coordination Disorder, were examined. The CAMP was administered to 465 school children aged 5–10 years. Thirty of the 35 items were retained as they had acceptable infit and outfit statistics. Item separation (7.48) and child separation (3.16) were good; moreover, the CAMP had excellent reliability (Reliability Index for item = 0.98; Person = 0.91). Principal components analysis of item residuals confirmed the unidimensionality of the instrument. Based on category probability statistics, the original five-point scale was collapsed into a four-point scale. The item threshold calibration of the CAMP with the Movement Assessment Battery for Children Test was computed. The results indicated that a CAMP total score of 75 is the optimal cut-off point for identifying children at risk of movement problems.

Textures and compressive properties of ferromagnetic shape-memory alloy Ni48Mn25Ga22Co5 prepared by isothermal forging process

A ferromagnetic shape-memory alloy Ni₄₈Mn₂₅Ga₂₂Co₅ was prepared by the induction melting and isothermal forging process. Dynamic recrystallization occurs during the isothermal forging. The deformation texture was studied by the neutron diffraction technique. The main texture components consist of (110)[112] and (001)[100], which suggested that in-plane plastic flow anisotropy should be expected in the as-forged condition. The uniaxial compression fracture strain in the forged alloy reaches over 9.5%. The final room-temperature fracture of the polycrystalline Ni₄₈Mn₂₅Ga₂₂Co₅ is controlled mainly by intergranular mode.

Methods of usability evaluations of mobile devices

The usability of applications designed and developed for mobile devices integral user experience, particularly for current touch-screen mobile devices. This conceptual paper provides a profile of the ways in which mobile device usability evaluation methods are being adapted to better reflect technological. With an increasing capacity for greater user interactivity through a range of tasks and in a variety of contexts, the importance and impact of mobile device context-of-use components is of particular interest to researchers. This requires a need for a shift in evaluation method paradigms with a particular focus on methods involving the user, as part of the overall development process. Having a better understanding of the context-of-use may contribute to improvements in mobile device usability and the overall user experience.

The influence of residual stress on a roll forming process

Roll forming is increasingly used in the automotive industry to form High Strength Steel (HSS) and Advanced High Strength Steel (AHSS) for structural components. Because of the large variety of applications of roll forming in the industry, Finite Element Analysis (FEA) is increasingly utilized for roll forming process design. Bending is the dominant deformation mode in roll forming and sheet materials used in the process are often temper rolled (skin passed), roller- or tension-levelled. These processes introduce residual stresses into the material, and recent studies have shown that those affect the material behaviour in bending. A thickness reduction rolling process available at Deakin that leads to material deformation similar to an industrial temper rolling operation was used in this study to introduce residual stresses into a dual phase, DP780, steel strip. The initial and thickness reduced strips were then used in a 5-stand experimental V-section roll forming set-up to identify the effect of residual stress on the final shape. The influence of residual stress and the effect of plastic deformation on the material behaviour in roll forming are separately determined in numerical simulation. The results show that the thickness reduction rolling process decreases the maximum bow height while the springback angle and end flare increase. Comparison with experimental results shows that using material data from the conventional tensile test in a numerical simulation does not allow for the accurate prediction of shape defects in a roll forming process if a residual stress profile exists in the material. On the other hand including the residual stress information leads to improved model accuracy.

The associations of vegetable consumption with food mavenism, personal values, food knowledge and demographic factors

Background: Poor dietary choices, in particular low consumption of fruits and vegetables are associated with the prevalence of diet related diseases. Ways to increase consumption are urgently required. This paper examines the associations of demographic, psychographic and food knowledge variables with reported vegetable consumption. Methods: An online questionnaire was administered in late 2012 to a national sample 2146 Australians who were selected to represent the Australian population in terms of age, sex, education and location of residence. It was divided into sections which assessed food knowledge, food involvement, food mavenism, personal values and personality factors, demographic characteristics and reported consumption of 13 vegetables and the total number of servings of vegetables per day. Principal components analyses of the individual vegetable consumption ratings derived three forms of vegetable consumption scores. These and total serving per day were used as dependent variables in a structural equation model to identify pathways between them and their likely antecedents. Major findings: Three types of vegetable consumption were formed:. Salad vegetables (onion, tomato and lettuce);. Dinner vegetables (carrot, peas and beans); and 'Green' vegetables (cabbage, spinach broccoli and cauliflower). Food mavenism, food knowledge, food involvement and equality-universalist values mediated the relationships between demographics and conscientiousness and the vegetable consumption variables. Conclusions: The three types of vegetable consumption and total servings per day were associated with different antecedent pathways. The mediating roles of food mavenism, food knowledge, food involvement and equality-universalist values may present opportunities for health promotion and the horticultural industry to increase population vegetable intake. Further research is required to test these associations via experimental and longitudinal studies and qualitative investigation of the meaning and place of the three forms of vegetable consumption in people's daily lives is recommended.

Flexible roll forming of an automotive component with variable depth

Roll forming is a cost and energy efficient process for the manufacture of Ultra High Strength Steel (UHSS) structural and crash components in the automotive industry. The conventional roll forming process is limited to component having constant cross-section, while the recently deveoped Flexible Roll Forming (FRF) process allows the production of components in which the section varies over the length of the aprt; this permits optimization in terms of strength and weight. There has been an uptake in FRF in the heavy vehicle industry for the production of long and high strength structural parts, but passenger car bodies are more complex and generally parts require variations in width and also in depth. The widespread application of FRF in the automotive industy therefore requires the forming of components that have intricate variations in profile depth over the length of the part.
This work is a first comprehensive study of the FRF of high strength structural components with variable depth. For this, the FRF of an automotive bumper section is analyzed numerically using the commercial software package COPRA® FEA RF. A detailed analysis of the distribution and history of plastic strain in longitudinal, transcerse and thickness directions is performed and related to the shape defects observed in the proecss. The analysis shows that when forming variable depth components, zones of compressive longitudinal strain exist that lead to wrinkling defects. These can be reduced by applying additional flange contact during the operation. In general the current work suggests that the FRF of high strength components with variable depth is possible and can compete with other forming methods currently used in the automotive industry.