Electromagnetic energy harvesting in a head-mountable DBS device using a circular PIFA

A circular planar inverted-F antenna (PIFA) is designed and simulated at the industrial, scientific, and medical (ISM) band of 915 MHz for energy harvesting in a head-mountable deep brain stimulation device. Moreover, a rectifier is designed, and also the interaction of the PIFA with a rat head model is investigated. In the proposed PIFA, the top radiating layer is meandered, and a substrate of FR-4 is used. The radius and the height of the antenna are 10 mm and 1.8 mm, respectively. The bottom conductive layer works as a ground plate, and a superstrate of polyethylene reduces the electromagnetic penetration into the rat head. The resonance frequency of the designed antenna is 915 MHz with a bandwidth of 18 MHz at the return loss of -10 dB in free space. The antenna parameters (e.g. reflection coefficient, gain, radiation efficiency), electric field distribution, and SAR value are evaluated within a seven-layer rat head model by using the finite difference time domain EM simulation software XFdtd. The interactions of the antenna and the rat head model are studied in both functional and biological aspects.

Effect of multiple cations in the feed solution on the performance of forward osmosis

In this study, different combinations of feed stream such as 0.2, 0.3 and 0.4 M of CaCl2 were, respectively, added with 1.0, 0.9 and 0.8 M of NaCl while maintaining the draw solution concentration at either 2.0 M of NaCl or CaCl2 in order to compare likely changes to the flux generated when the feed stream contained NaCl only. The results obtained showed that more constituents in feed stream generated lesser flux. Increase in CaCl2 concentration in feed stream resulted in more severe dilutive internal concentration polarisation (DICP) and hence, reduction in the performance ratio. The temperature and distribution of aggregated particle size also played a significant role in the overall performance of forward osmosis process. Further analysis showed that there is a relationship between the normalised driving force and flux behaviour which is governed by the effect of DICP. Additionally, the reflection coefficient was not unity as less than 2% traces of salt was found to permeate alongside with water towards the draw solution side. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Mobility and emplacement in north coast Papua New Guinea: worlding the Pacific marine industrial zone

On the north coast of Papua New Guinea, the construction of the Pacific Marine Industrial Zone is catalysing movements of people, capital and things, as well as of the ideas and imaginings which accompany and make them meaningful. Drawn from literary and postcolonial studies, the concept of worlding offers a narrative framework through which to think through these movements and the ways in which they complicate prevailing narratives of globalisation. At the Pacific Marine Industrial Zone, the neoliberal worldings that inform the project do not simply catalyse movements, but also act to impose barriers to movement. Local communities assert connection to place, but also generate new circuits of mobility, and rearticulate ideas of kastom (custom) that have movement at their core. An emphasis on worlding-drawing particularly on Heidegger's distinction between world and earth-allows for a more complex reflection on the relationship between mobility and emplacement, one that more fully illuminates the complexity of the relationship itself, and the way it is experienced at the PMIZ site.

Carburising and carbon transfer coefficient in a fluidised bed furnance

The carburising of a steel workpiece with complex geometry in a fluidised bed hasbeen studied experimentally. This involved carburising experiment in an electrically heated fluidised bed at 900 - 970°C with natural gas and air as the atmosphere. The carbon transfer coefficient at the workpiece surface and diffusivity within the workpiece were determined from the carbon distribution within the diffusion layer of the sample. A reverse method and the Levenberg-Marquardt algorithm were used in the calculations. The methodology of the reverses method to extract the carbon transfer coefficient and diffusivity is also discussed in some detail.

Design of experiments and springback prediction for AHSS automotive components with complex geometry

With the drive towards implementing Advanced High Strength Steels (AHSS) in the automotive industry; stamping engineers need to quickly answer questions about forming these strong materials into elaborate shapes.
Commercially available codes have been successfully used to accurately predict formability, thickness and strains in complex parts. However, springback and twisting are still challenging subjects in numerical simulations of AHSS components. Design of Experiments (DOE) has been used in this paper to study the sensitivity of the implicit and explicit numerical results with respect to certain arrays ofuser input parameters in the forming ofan AHSS component. Numerical results were compared to experimental measurements of the parts stamped in an industrial production line. The forming predictions of the implicit and explicit codes were in good agreement with the experimental measurements for the conventional steel grade, while lower accuracies were observed for the springback predictions. The forming
predictions of the complex component with an AHSS material were also in good correlation with the respective experimental measurements. However, much lower accuracies were observed in its springback predictions. The number of integration points through the thickness and tool offset were found to be of significant importance, while coefficient of friction and Young's modulus (modeling input parameters) have no significant effect on the accuracy of the predictions for the complex geometry.

Scenarios as springboards for reflection on practice : stimulating discussion

Increasingly there is an expectation that new graduates will have developed, prior to their induction into teaching, sound theoretical knowledge in relation to practice. However, in Australia, many pre-service teachers have insufficient time in the field to develop reflective practice and to observe how experienced teachers enhance their own knowledge through reflection on practice. In this article we discuss one way to introduce teacher education students to the notion of reflective practice. We explore the potential of scenarios to develop reflective thinking in pre-service teacher education students and highlight the processes and requisite criteria for developing scenarios that capture the rich and complex experiences of classroom practitioners. The scenario presented here has been fashioned from a pre-service teacher's story of classroom practice collected from her during an interview for a research project. While the scenario was intended for use only with pre-service teachers in order to increase their knowledge-base and analytical skills, when it was trialled with a group of experienced teachers in order to ascertain its suitability for novice teachers, an unexpected outcome was that it resonated with the teachers in ways that enabled them also to reflect more deeply on their professional practices. We speculate that the processes of scenario construction may also be valuable in other settings where reflective practice is a professional requisite.

Recover fault services via complex service-to-node mappings in wireless sensor networks

With the motivation of seamlessly extending wireless sensor networks to the external environment, service-oriented architecture comes up as a promising solution. However, as sensor nodes are failure prone, this consequently renders the whole wireless sensor network to seriously faulty. When a particular node is faulty, the service on it should be migrated into those substitute sensor nodes that are in a normal status. Currently, two kinds of approaches exist to identify the substitute sensor nodes: the most common approach is to prepare redundancy nodes, though the involved tasks such as maintaining redundancy nodes, i.e., relocating the new node, lead to an extra burden on the wireless sensor networks. More recently, other approaches without using redundancy nodes are emerging, and they merely select the substitute nodes in a sensor node's perspective i.e., migrating the service of faulty node to it's nearest sensor node, though usually neglecting the requirements of the application level. Even a few work consider the need of the application level, they perform at packets granularity and don't fit well at service granularity. In this paper, we aim to remove these limitations in the wireless sensor network with the service-oriented architecture. Instead of deploying redundancy nodes, the proposed mechanism replaces the faulty sensor node with consideration of the similarity on the application level, as well as on the sensor level. On the application level, we apply the Bloom Filter for its high efficiency and low space costs. While on the sensor level, we design an objective solution via the coefficient of a variation as an evaluation for choosing the substitute on the sensor level. © 2014 Springer Science+Business Media New York.

Identifying social influence in complex networks: a novel conductance eigenvector centrality model

Identifying influential peers is an important issue for business to promote commercial strategies in social networks. This paper proposes a conductance eigenvector centrality (CEC) model to measure peer influence in the complex social network. The CEC model considers the social network as a conductance network and constructs methods to calculate the conductance matrix of the network. By a novel random walk mechanism, the CEC model obtains stable CEC values which measure the peer influence in the network. The experiments show that the CEC model can achieve robust performance in identifying peer influence. It outperforms the benchmark algorithms and obtains excellent outcomes when the network has high clustering coefficient.