Design of a compact microfludic device for controllable cell distribution

A compact microfluidic device with 96 microchambers allocated within four circular units was designed and examined for cell distribution. In each unit, cells were distributed to the surrounding chambers radially from the center. The circular arrangement of the chambers makes the design simple and compact. A controllable and quantitative cell distribution is achievable in this device. This design is significant to the microfluidic applications where controllable distribution of cells in multipule microchambers is demanded.

Compact stacked planar inverted-F antenna for passive deep brain stimulation implants

A compact meandered three-layer stacked circular planar inverted-F antenna is designed and simulated at the UHF band (902.75 – 927.25 MHz) for passive deep brain stimulation implants. The UHF band is used because it offers small antenna size, and high data rate. The top and middle radiating layers are meandered, and low cost substrate and superstrate materials are used to limit the radius and height of the antenna to 5 mm and 1.64 mm, respectively. A dielectric substrate of FR-4 of εr= 4.7 and δ= 0.018, and a biocompatible superstrate of silicone of er= 3.7 and d= 0.003 with thickness of 0.2 mm are used in the design. The resonance frequency of the proposed antenna is 918 MHz with a bandwidth of 24 MHz at return loss of −10 dB in free space. The antenna parameter such as 3D gain pattern of the designed antenna within a skin-tissue model is evaluated by using the finite element method. The compactness, wide bandwidth, round shape, and stable characteristics in skin make this antenna suitable for DBS. The feasibility of the wireless power transmission to the implant in the human head is also examined.

The Nitric Oxide (NO)-Sensing Repressor NsrR of Neisseria meningitidis Has a Compact Regulon of Genes Involved in NO Synthesis and Detoxification

We have analyzed the extent of regulation by the nitric oxide (NO)-sensitive repressor NsrR from Neisseria meningitidis MC58, using microarray analysis. Target genes that appeared to be regulated by NsrR, based on a comparison between an nsrR mutant and a wild-type strain, were further investigated by quantitative real-time PCR, revealing a very compact set of genes, as follows: norB (encoding NO reductase), dnrN (encoding a protein putatively involved in the repair of nitrosative damage to iron-sulfur clusters), aniA (encoding nitrite reductase), nirV (a putative nitrite reductase assembly protein), and mobA (a gene associated with molybdenum metabolism in other species but with a frame shift in N. meningitidis). In all cases, NsrR acts as a repressor. The NO protection systems norB and dnrN are regulated by NO in an NsrR-dependent manner, whereas the NO protection system cytochrome c′ (encoded by cycP) is not controlled by NO or NsrR, indicating that N. meningitidis expresses both constitutive and inducible NO protection systems. In addition, we present evidence to show that the anaerobic response regulator FNR is also sensitive to NO but less so than NsrR, resulting in complex regulation of promoters such as aniA, which is controlled by both FNR and NsrR: aniA was found to be maximally induced by intermediate NO concentrations, consistent with a regulatory system that allows expression during denitrification (in which NO accumulates) but is down-regulated as NO approaches toxic concentrations.

Biocompatible ionic liquid-biopolymer electrolyte-enabled thin and compact magnesium-air batteries.

With the surge of interest in miniaturized implanted medical devices (IMDs), implantable power sources with small dimensions and biocompatibility are in high demand. Implanted battery/supercapacitor devices are commonly packaged within a case that occupies a large volume, making miniaturization difficult. In this study, we demonstrate a polymer electrolyte-enabled biocompatible magnesium-air battery device with a total thickness of approximately 300 μm. It consists of a biocompatible polypyrrole-para(toluene sulfonic acid) cathode and a bioresorbable magnesium alloy anode. The biocompatible electrolyte used is made of choline nitrate (ionic liquid) embedded in a biopolymer, chitosan. This polymer electrolyte is mechanically robust and offers a high ionic conductivity of 8.9 × 10(-3) S cm(-1). The assembled battery delivers a maximum volumetric power density of 3.9 W L(-1), which is sufficient to drive some types of IMDs, such as cardiac pacemakers or biomonitoring systems. This miniaturized, biocompatible magnesium-air battery may pave the way to a future generation of implantable power sources.

Development of a compact rectenna for wireless powering of a head-mountable deep brain stimulation device

Design of a rectangular spiral planar inverted-F antenna (PIFA) at 915 MHz for wireless power transmission applications is proposed. The antenna and rectifying circuitry form a rectenna, which can produce dc power from a distant radio frequency energy transmitter. The generated dc power is used to operate a low-power deep brain stimulation pulse generator. The proposed antenna has the dimensions of 10 mm × 12.5 mm × 1.5 mm and resonance frequency of 915 MHz with a measured bandwidth of 15 MHz at return loss of -10 dB. A dielectric substrate of FR-4 of εr = 4.8 and δ = 0.015 with thickness of 1.5 mm is used for both antenna and rectifier circuit simulation and fabrication because of its availability and low cost. An L-section impedance matching circuit is used between the PIFA and voltage doubler rectifier. The impedance matching circuit also works as a low-pass filter for elimination of higher order harmonics. Maximum dc voltage at the rectenna output is 7.5 V in free space and this rectenna can drive a deep brain stimulation pulse generator at a distance of 30 cm from a radio frequency energy transmitter, which transmits power of 26.77 dBm.

Compact development minimizes the impacts of urban growth on native mammals

Unprecedented global human population growth and rapid urbanization of rural and natural lands highlight the urgent need to integrate biodiversity conservation into planning for urban growth. A challenging question for applied ecologists to answer is: What pattern of urban growth meets future housing demand whilst minimizing impacts on biodiversity? We quantified the consequences for mammals of meeting future housing demand under different patterns of compact and dispersed urban growth in an urbanizing forested landscape in south-eastern Australia. Using empirical data, we predicted impacts on mammals of urban growth scenarios that varied in housing density (compact versus dispersed) and location of development for four target numbers of new dwellings. We predicted that compact developments (i.e. high-density housing) reduced up to 6% of the area of occupancy or abundance of five of the six mammal species examined. In contrast, dispersed developments (i.e. low-density housing) led to increased mammal abundance overall, although results varied between species: as dwellings increased, the abundance or occurrence of two species increased (up to ∼100%), one species showed no change, and three species declined (up to ∼39%). Two ground-dwelling mammal species (Antechinus stuartii and Rattus fuscipes) and a tree-dwelling species (Petaurus australis) were predicted to decline considerably under dispersed rather than compact development. The strongest negative effect of dispersed development was for Petaurus australis (a species more abundant in forested interiors) which exhibited up to a 39% reduction in abundance due to forest loss and an extended negative edge effect from urban settlements into adjacent forests. Synthesis and applications. Our findings demonstrate that, when aiming to meet demand for housing, any form of compact development (i.e. high-density housing) has fewer detrimental impacts on forest-dwelling mammals than dispersed development (i.e. low-density housing). This is because compact development concentrates the negative effects of housing into a small area whilst at the same time preserving large expanses of forests and the fauna they sustain. Landscape planning and urban growth policies must consider the trade-off between the intensity of the threat and area of sprawl when aiming to reduce urbanization impacts.