Reliability of performance in repeated sprint cycling tests

We have estimated the reliability of performance in a commonly employed exercise test consisting of repeated sprints on a cycle ergometer. Eight recreationally active young men completed a practice trial and three more trials at 3- to 6-day intervals. Each trial consisted of two bouts of 30-s maximal-effort cycling on an electromagnetically braked cycle ergometer; the bouts were separated by 4 min of rest. The typical (standard) errors of measurement for peak and mean power between trials 2 to 4 were 2.5 and 1.7% respectively for the first bout and 1.9 and 1.8% for the second bout. These errors are substantially less than those in previous reliability studies of single 30-s sprint tests, probably because of differences in quality of ergometer. The typical errors for the difference between bouts (i.e., fatigue) for peak power and mean power were 3.0 and 2.5%, respectively. Typical errors for the average of the two bouts were 1.6 and 1.2% for peak and mean power respectively, which are small enough to give adequate precision for moderate treatment effects in studies with modest sample sizes.

Application of bending under tension test to determine the effect of tool radius and the contact pressure on the coefficient of friction in sheet metal forming

To quantify the frictional behaviour in sheet forming operations, several laboratory experiments which simulate the real forming conditions are performed. The Bending Under Tension Test is one such experiment which is often used to represent the frictional flow of sheet material around a die or a punch radius. Different mathematical representations are used to determine the coefficient of friction in the Bending Under Tension Test. In general the change in the strip thickness in passing over the die radius is neglected and the radius of curvature to thickness ratio is assumed to be constant in these equations. However, the effect of roller radius, sheet thickness and the surface pressure are also omitted in some of these equations. This work quantitatively determined the effect of roller radius and the tooling pressure on the coefficient of friction. The Bending Under Tension Test was performed using rollers with different radii and also lubricants with different properties. The tool radii were found to have a direct influence in the contact pressure. The effect of roller radius on friction was considerable and it was observed that there is a clear relationship between the contact pressure and the coefficient of friction.

The role of performance anxiety in the development and maintenance of sexual dysfunction in men and women

The current study evaluated the association between attitudes toward sex, stress, relationship quality, performance anxiety, and sexual dysfunction among 157 men (114 dysfunctional, 43 functional) and 186 women (84 dysfunctional, 102 functional). The results demonstrate that the main factors related to all types of sexual dysfunction among men were attitudes toward sex, conflict in their relationship, and performance anxiety. For women, the main factors related to all types of sexual dysfunction were attitudes toward sex, relationship quality, and performance anxiety. These results demonstrate the central role of performance anxiety in either the development or maintenance of sexual dysfunction among both men and women. Clearly, this is an area that has to be considered in any treatment program for sexual dysfunction. (PsycINFO Database Record (c) 2008 APA, all rights reserve

Views from the executive suite : lessons from the introduction of performance management

Performance management introduced to the senior health executive levels in the New South Wales public health care system included the senior executive service in 1989 and, as a key element of that service, performance agreements in 1990. This is the first qualitative study examining senior health executives' personal experiences of these changes. In consideration of what has been learnt from the most relevant literature and this study, this paper concludes that the introduction and implementation performance management is a continuous process. This process includes the key steps of planning, measuring, monitoring and evaluating. It can be used as a means to achieve overall effective organisation performance by bringing in a two way management process for the organisation and its senior health executives.

The reliability of performance of healthy adults on three visual perception tests

Problems with visual perceptual skills have been shown to have a negative impact on the daily living skills of individuals and are, therefore, commonly assessed by occupational therapists. The purpose of this study was to examine two types of reliability (internal consistency and test-retest reliability) of three newly revised or developed adult visual perception tests. The participants were 50 healthy adults, aged 18 to 55 years, from Melbourne, Victoria, Australia. The participants completed the Developmental Test of Visual Perception - Adolescent and Adult (DTVP-A), the Motor-Free Visual Perception Test - Third Edition (MVPT-3) and the Test of Visual Perceptual Skills (non-motor) - Third Edition (TVPS-3). Internal consistency was examined using Cronbach's alpha calculations and test-retest reliability was analysed using Spearman rho non-parametric correlation coefficients.

The results indicated that the DTVP-A, the MVPT-3 and the TVPS-3 had total scale internal consistency correlation scores of 0.60 or higher (0.60, 0.69 and 0.63 respectively). The majority of the subscales of each test had lower correlation coefficients than the overall scores (ranging from 0.22 to 0.49). For the DTVP-A, MVPT-3 and TVPS-3 total scale scores, the test-retest reliability correlation coefficients were statistically significant (rho = 0.46, p<0.05; rho = 0.62, p<0.01; and rho = 0.59, p<0.01, respectively). Overall, the three visual perceptual tests exhibited low to moderate levels of internal consistency and test-retest reliability.

Situational and dispositional indicators of performance : competing models in education

The attainment of high grades on the Victorian Certificate of Education (VCE) is critical to the future study and employment prospects of many Australian adolescents. Thus it is important to understand the factors that contribute to performance in the VCE. The aims of this study were twofold: the main aim was to test competing models of academic performance, subsuming a range of situational and dispositional variables based on a) self-efficacy theory, b) target and purpose goals, c) cognitive skills and self-regulatory strategies, and d) positive psychology. These models were each tested in terms of English performance and mathematics performance as these units contribute proportionally the most to overall VCE scores. In order to study whether pressures peculiar to the VCE impact on performance, the competing models were tested in a sample of Victorian students prior to the VCE (year 10) and then during the VCE (year 11). A preliminary study was conducted in order to develop and test four scales required for use in the major study, using an independent sample of 302 year nine students. The results indicated that these new scales were psychometrically reliable and valid. Three-hundred and seven Australian students participated in the year 10 and 11 study. These students were successively asked to provide their final years 9, 10 and 11 English and mathematics grades at times one, three and five and to complete a series of questionnaires at times two and four. Results of the year 10 study indicated that models based on self-efficacy theory were the best predictors of both English and mathematics performance, with high past grades, high self-efficacy and low anxiety contributing most to performance. While the year 10 self-efficacy models, target goal models, positive psychology models, self-regulatory models and cognitive skill based models were each robust in the sample in year 11, a substantial increase in explained variance was observed from year 10 to year 11 in the purpose goal models. Results indicated that students’ mastery goals and their performance-approach goals became substantially more predictive in the VCE than they were prior to the VCE. This result can be taken to suggest that these students responded in very instrumental ways to the pressures, and importance, of their VCE. An integrated model based on a combination of the variables from the competing models was also tested in the VCE. Results showed that these models were comparable, both in English and mathematics, to the self-efficacy models, but explained less variance than the purpose goal models. Thus in terms of parsimony the integrated models were not preferred. The implications of these results in terms of teaching practices and school counseling practices are discussed. It is recommended that students be encouraged to maintain a positive outlook in relation to their schoolwork and that they be encouraged to set their VCE goals in terms of a combination of self-referenced (mastery) and other-referenced (performance-approach) goals.

Fiji’s sugar, tourism and garment industries : a survey of performance, problems and potentials

Sugar, tourism and garment industries are three of Fiji’s major industries. These industries have been undergoing some serious problems during the past decade. This paper analyses the performance of these industries, examines the problems besieging them, and looks at the potentials these industries have for the country. The paper also offers some suggestions which policy makers in Fiji could consider in order to ensure that these industries continue to benefit Fiji.

Justice in the workplace : the centrality of social versus judgmental predictors of performance varies by gender

Men and women are said to perceive justice differently, with women proposed to  be more concerned with relational issues and men focused more on material issues. In this study, the potential for differential effects of justice on performance by gender was analyzed across the four contemporary types of justice.  Respondents were 265 male and 113 female occupationally diverse employees in a single organization. The results show significant differences in how men and women respond to the four justice types with only one – informational justice – acting similarly by gender. The differential relationships between each of the justice types and the outcomes by gender highlight the utility of the four factor approach to measuring organizational justice. Women were more interested in maintaining social harmony than men. The results appear to strongly support the use of the justice judgment model over the group-value model as a means of explaining the gender differences. Implications for management include the importance of informational justice both generally and within the performance appraisal process.

Variation of fibre diameter coefficient of variation and fibre curvature across mohair fleeces: Implications for animal selection, genetic selection and fleece evaluation

The presentwork aimed to determine howthe average fibre diameter coefficient of variation (CVD) and fibre curvature (FC) differences between nine sampling sites vary between sex and flock, to identify differences in variability between sampling sites as a result of between animal and between sire variability and to determine correlations between sampling sites in between animal and between sire variability. Australian Angoras (n = 313) from two farms in southern Australia were sampled at 12 and 18 months of age at nine sites (mid side, belly, brisket, hind flank, hip, hock, mid back, neck, shoulder). Staples were taken prior to shearing at skin level and CVD and FC determined. For each shearing, differences in CVD and FC between sampling sites, how these differences were affected by farm, sex, and sire, and the covariance between sites for sire and individual animal effects were investigated by restricted maximum likelihood (REML) analyses. The median mid side CVD at 12 and 18 months of age ranged from 23.6 to 25.1% but the actual range was 16.8–34.2%. The median mid side FC at 12 and 18 months of age ranged from 14.4 to 18.6◦/mm but the actual range was 10.5–26.3◦/mm. The general pattern for CVDwas for the mid back, hip and neck sites to have similar CVD, the brisket, hind flank and hock sites to have larger CVD and the belly to have smaller CVD than the mid side site. The between animal variation for CVD was lowest at the mid back site. This implies that the mid back would be the most effective site for between animal selection for CVD. Heritabilities for CVD (range at 18 months 0.18–0.30) were only about half the heritabilities for mean fibre diameter in the same study. There was a marked anterior–posterior increase in FC at both farms and with both ages. The results give no clear indication of the best site for between animal selection for FC, other than that the hock should be avoided. Heritabilities for FC are moderate to high (range at 18 months 0.44–0.77) and the genetic correlations are high except for the hock. Thus genetic selection for FC at any site, other than the hock, should be effective for changing FC over the entire fleece. There was more variability between animals than between sites and sires. These results are put into context with associated research on variation in mean fibre diameter and staple length.

A critical review of performance measurement methods for healthcare facilities management

This paper aims to define the tools used for performance measurement in Healthcare Facilities Management. The research analyses relevant literature on various tools of performance measurement for healthcare facilities. Contributions made from the literature will be divided into three attributes namely soft performance measurement, hard performance measurement and a hybrid performance measurement. The findings discussed in this paper may give valuable insights to service providers with regards to the incorporation of both soft and hard attributes of performance measurement to strategically manage facilities. The organisation business strategy will eventually gain the benefits by cost saving of non-core activities.