Foreign Direct Investment and Regional Export Performance in China

This paper investigates the impact of foreign direct investment (FDI) on the export performance of China at the provincial level. First, it presents a theoretical discussion of the impact of FDI on foreign trade, and then an empirical study of the impact of FDI on the export performance of regions in Chin. It has been found that the impact of FDI on exports differs across three macro-regions in China. The effect is stronger in the coastal region than in the inland regions. Although FDI shows a positive and significant impact on exports from the central region, its impact on the western region is found to be insignificant.

Do permanent shocks explain income levels? a common cycle-common trend analysis of regional income levels for China

In this paper, we analyse per capita income levels of China's three main regions: the western region, the eastern region and the central region using common cycle and common trend tests. Our main contribution is that we impose the common cycle and common trend restrictions in decomposing shocks into permanent and transitory components. We find that: (i) there is evidence for two cointegrating relationships and one common cycle; and (ii) the variance decomposition analysis of shocks provides evidence that over short horizons, permanent shocks play a large role in explaining variations in regional per capita incomes.

Electron back scattered diffraction (EBSD) characterization of warm rolled and accumulative roll bonding (ARB) processed ferrite

An interstitial free (IF) steel was severely deformed using accumulative roll bonding (ARB) process and warm rolling. The maximum equivalent strains for ARB and warm rolling were 4.8 and 4.0, respectively. The microstructure and micro-texture were studied using optical microscopy and scanning electron microscopy equipped with electron back scattered diffraction (EBSD). The grain size and misorientation obtained by both methods are in the same range. The microstructure in the ARB samples after 6 cycles is homogeneous, although a grain size gradient is observed at the layers close to the surface. The through thickness texture gradient in the ARB samples is different from the warm rolled samples. While a shear texture (⟨110⟩//rolling plane normal direction (ND)) at the surface and rolling texture at the center region is developed in the ARB  samples, the overall texture is weak. The warm rolled samples display a sharp rolling texture through the thickness with increasing the sharpness toward the center. These differences are attributed to the fact that the central region of ARB strip is comprised of material that was once at the surface. The ARB process  can suppress the formation of shear bands which are conventional at warm rolled IF steels. EBSD study on the sample with 6th cycle of ARB following the annealing at 750 ◦C verified a texture gradient through the thickness of the sheet. The shear orientations at the surface and at the quarter thickness layers can be identified even after annealing. The overall weak texture and existence of shear orientations make ARB processed samples unfavorable for sheet metal forming in compare with warm rolled samples.

BODY FOR PNEUMATIC VEHICLE

A pneumatic vehicle is provided with a first and second sub-assembly. The first sub-assembly has a chassis supporting an air tank. The second sub-assembly has part of the vehicle body and is bonded to the first-sub-assembly using a structural adhesive. Another pneumatic vehicle is provided with a first and second sub-assembly. The first sub-assembly has a chassis, air tank, part of the vehicle body, a pair of B-pillars, and a pair of rear rails. The second sub-assembly has a part of the vehicle body, a pair of A-pillars, and a pair of roof rails. A vehicle seat is provided with a seat base and upright seat back providing a seating area. A bladder located in the central region of the seating area inflates to provide two bucket seats, and deflates to provide a bench seat. The vehicle seat also has inflatable inserts to provide cushioning.

The 'wimple' : rippled deformation of a fluid drop caused by hydrodynamic and surface forces during thin film drainage

It is well-known that hydrodynamic pressures in a thin draining liquid film can cause inversion of the curvature of a drop or bubble surface as it approaches another surface, creating a so-called “dimple”. Here it is shown that a more complicated rippled shape, dubbed a “wimple”, can be formed if a fluid drop that is already close to a solid wall is abruptly pushed further toward it. The wimple includes a central region in which the film remains thin, surrounded by a ring of greater film thickness that is bounded at the outer edge by a barrier rim where the film is thin. This shape later evolves into a conventional dimple bounded by the barrier rim, which then drains in the normal way. During the evolution from wimple to dimple, some of the fluid in the thicker part of the film ring flows toward the central region before eventually draining in the opposite direction. Although the drop is pressed toward the wall, the central part of the drop moves away from the wall before approaching it again. This is observed even when the inward push is too small to create a wimple.

Corneal staining and cell shedding during the development of solution-induced corneal staining

Purpose. This non-dispensing cross-over study was conducted to determine if lenses presoaked in Opti-Free RepleniSH (OFR) or ReNu MultiPlus (RMP) cause solution-induced corneal staining (SICS) and subsequent cell sloughing before the typical 2 h in vivo examination point.

Methods. Study lenses (PureVision) were worn bilaterally by 13 participants for periods of 15, 30, 60, and 120 min using two different contralateral care regimen pairings. The lens worn on the test eye was soaked overnight in either OFR or RMP and the control eye in Clear Care (CC). After lens removal, corneal staining was rated on a scale of 0 (negligible) to 100 (severe) for four peripheral quadrants and the central region, and the differential global staining score was calculated by subtracting baseline staining scores. Following the staining assessment, corneal cells were collected from the ocular surface using a non-contact irrigation system to determine ocular cell shedding rates.

Results. Differential global staining score with OFR was greater than CC with the differences being statistically significant at 30 and 60 min (p < 0.01). Maximum staining with RMP was significantly greater than OFR and peaked after 60 and 120 min of lens wear (p < 0.01). On average, 710 ± 470 ocular cells were collected after lens wear, with similar shedding seen independent of solution or lens wear duration (p > 0.05).

Conclusions. SICS occurred earlier but to a significantly lower degree when PureVision lenses were presoaked in OFR compared with RMP, while lenses presoaked in CC did not cause SICS. Ocular surface cell shedding after lens removal was not impacted by lens wear durations of <=2 h.

Body for pneumatic vehicle

A pneumatic vehicle is provided with a first and second sub-assembly. The first sub-assembly has a chassis supporting an air tank. The second sub-assembly has part of the vehicle body and is bonded to the first-sub-assembly using a structural adhesive. Another pneumatic vehicle is provided with a first and second sub-assembly. The first sub-assembly has a chassis, air tank, part of the vehicle body, a pair of B-pillars, and a pair of rear rails. The second sub-assembly has a part of the vehicle body, a pair of A-pillars, and a pair of roof rails. A vehicle seat is provided with a seat base and upright seat back providing a seating area. A bladder located in the central region of the seating area inflates to provide two bucket seats, and deflates to provide a bench seat. The vehicle seat also has inflatable inserts to provide cushioning.

Atmospheric quality and distribution of heavy metals in Argentina employing Tillandsia capillaris as a biomonitor.

The atmospheric quality and distribution of heavy metals were evaluated throughout a wide region of Argentina. In addition, the biomonitor performance of Tillandsia capillaris Ruiz & Pav. f. capillaris was studied in relation to the accumulation of heavy metals and to its physiologic response to air pollutants. A sampling area of 50,000 km2 was selected in the central region of the Argentine Republic. This area was subdivided into grids of 25 x 25 km. Pools of T. capillaris, where present, were collected at each intersection point. From each pool three sub-samples were analyzed independently. Furthermore, five replicates were collected at 20% of the points in order to analyze the variability within the site. The content of Co, Cu, Fe, Ni, Mn, Pb and Zn was determined by Atomic Absorption Spectrometry. Chemical-physiological parameters were also determined to detect symptoms of foliar damage. Chlorophylls, phaeophytins, hydroperoxy conjugated dienes, malondialdehyde and sulfur were quantified in T. capillaris. Some of these parameters were used to calculate a foliar damage index. Data sets were evaluated by one-way ANOVA, correlation analysis, principal component analysis and mapping. Geographical distribution patterns were obtained for the different metals reflecting the contribution of natural and anthropogenic emission sources. According to our results it can be inferred that Fe, Mn and Co probably originated in the soil. For Pb, the highest values were found in the mountainous area, which can be attributed to the presence of Pb in the granitic rocks. Ni showed mainly an anthropogenic origin, with higher values found in places next to industrial centers. For Zn the highest values were in areas of agricultural development. The same was observed for Cu, whose presence could be related to the employment of pesticides. The foliar damage index distribution map showed that the central and southeastern zones were the ones where the major damage in the bioindicator was found. The central zone coincides with the city of Córdoba whereas the southeastern area is strictly agricultural, so the high values found there could be related to the use of pesticides.

Nature of crystalline particle assembly in ring shaped colloidal stains from concentrated dispersions

The drying of colloidal droplet suspensions is important in many realms of practical application and has sustained the interest of researchers over two decades. The arrangements of polystyrene and silica beads, both of diameter 1 μm, 10% by volume of solid deposited on normal glass (hydrophilic), and silicone (hydrophobic) surfaces evaporated from a suspension volume of 3 μL, were investigated. Doughnut shape depositions were found, imputing the influence of strong central circulation flows that resulted in three general regions. In the central region which had strong particle build-up, the top most layers of particle arrangement was confirmed to be disordered using power spectrum and radial distribution function analysis. On closer examination, this appeared more like frustrated attempts to crystallize into larger grains rather than beads arranging in a disordered fashion throughout the piling process. With an adapted micro-bulldozing operation to progressively remove layers of particles from the heap, we found that the later efforts to crystallize through lateral capillary inter-particle forces were liable to be undone once the particles contacted the disorganized particles underneath, which were formed out of the jamming of fast particles arriving at the surface. © 2014 Elsevier B.V.

Childhood cancer in Argentina: survival 2000–2007

 Introduction: Information on the epidemiology of childhood cancer in Latin America is limited. The Argentinean Oncopaediatric Registry (ROHA) is a population-based registry active since 2000. This paper describes the 3-year survival experience of children diagnosed with cancer in Argentina during 2000–2007 by major morphological subgroup, age, sex, and geographical region of residence.
Methods: Newly diagnosed paediatric cancer cases are registered in ROHA (estimated coverage is 93% of the country’s cases). Three-year overall survival was estimated using Kaplan–Meier methods. Univariate Cox models were used to compare subgroup survival.
Results: Between 2000 and 2007, a total of 10,181 new cancer diagnoses in children aged 0–14 years were reported to the registry. Three-year overall survival (95%CI) for all cancers was 61.7% (60.7; 62.7). Specific survival for the most frequent morphological types was: leukaemias 63.3% (61.6; 64.9), lymphomas and related neoplasms 75.3% (72.7; 77.7), brain neoplasms 46.3% (43.9; 48.7), soft-tissue sarcomas 52.3% (48.0; 56.5), neuroblastomas 49.6% (44.6; 54.3), renal tumours 76.7% (72.2; 80.6), and malignant bone tumours 47.2% (42.3; 51.9). Overall survival was associated with age but not sex and varied by geographical region. Compared to other regions, patients who resided in the capital city had a significantly higher survival: 69.6% (65.8; 73.0) versus 63.5% (59.4; 67.4) in Patagonia, 63.2% (61.9; 64.5) in the central region, 58.0% (54.2; 61.7) in Cuyo, 55.6% (52.5; 58.6) in the north-east, and 55.4% (52.4; 58.2) in the north-west (all P values <0.005).
Conclusions: Of children diagnosed with cancer in Argentina, 62% survived at least 3 years after diagnosis. Even though this figure is lower than that reported for more developed countries, survival patterns by diagnosis, age and sex were quite similar. Survival was lower in the two northern regions, which are areas with higher poverty levels.

Guadalupian (Middle Permian) brachiopods from Sungai Toh, a Leptodus Shale locality in the Central Belt of Peninsular Malaysia. Part I: Lower Horizons

This work presents a systematic study of Permian Brachiopoda from the Sungai Toh Leptodus Shale locality, Pahang State, Peninsular Malaysia. This locality lies within the Central Belt of Peninsular Malaysia, a tectonic unit characterised.by tuffaceous sediments and limestones of Late Palaeozoic age. Two brachiopod-bearing horizons were studied in detail at this locality, the lower one (Horizon 2) bearing a mixed plant and invertebrate assemblage, including the brachiopods Urushtenoidea chaoi (CHING), Leptodus richthofeni KAYSER, Anidanthus cf. sinosus HUANG, Acosarina dorashamensis (SOKOLSKAJA), A. minuta (ABleH) and unidentifiable species of Linoproduetus, Neochonetes, and Strophalosiina. Horizon 3 contains a more abundant and diverse brachiopod fauna, comprising a total. of 57 species representing 47 genera, including Vediproductus punetatiformis (CHAO), Permianella typica HE & ZHU, Tranrennatia gratiosa (WAAGEN), Leptodus richthofeni KAYSER, Leptodus cf. tenuis (WAAGEN) and "Semibrachythyrina" [= Alphaneospirifer] cf. pyramidiformis LIANG. It is
suggested in this study that the age of the Sungai Toh locality is Capitanian (late Guadalupian) to possibly Wuchiapingian (early Lopingian),
as it appears to correlate well with the Lengwu fauna from Zhejiang in eastern China. The palaeobiogeographical affinities of the Sungai Toh fauna are interesting, mainly indicating strong Palaeo-equatorial affinities, while there are also some elements more typical of the cooler periGondwana
Region.

Evidence for Megalake Chad, north-central Africa, during the late quaternary from satellite data

The existence of a very large Lake Chad during the late Quaternary, Megalake Chad, has long been questioned. A Megalake Chad would present strong evidence for climatic fluctuations of great magnitude during the Holocene in tropical Africa. In this paper we used satellite data from Landsat and Modis sensors to collect and analyse new information on landforms in a 2 000 000 km2 region of the Lake Chad Basin. We detected 2300 km of remains marking the ancient shoreline of Megalake Chad. The satellite data also indicated many Saharan rivers and relict deltas leading to the long paleoshoreline. Large dunefield flattenings were observed and interpreted as the result of wave-cut erosion by the paleolake. Similarities were noticed between the landforms observed along the paleoshoreline of Megalake Chad and that of the former Aral Sea. This finding has significant consequences for reconstructing paleohydrology and paleoenvironments through the Lake Chad basin, and continental climate change.

G21 healthy region project part 1 : business plan

Executive Summary
Background
G21 Geelong Region Alliance (G21), through the partnership activities of the
G21 Health & Wellbeing Pillar, seeks to position health and wellbeing as a
central element to all regional planning processes and outcomes. As a result, G21 wanted to explore the potential application of the World Health
Organisation’s (WHO) ‘Healthy Cities’ approach across the region to provide a comprehensive framework and set of principles to inform future planning and decision-making.
With this aim, G21 commissioned Deakin University to undertake a 6-month
independent research project. The research project involved two stages:
Part 1: A Healthy Region Research Report involved scoping and determining:
- The suitability of the World Health Organisations (WHO) ‘Healthy Cities’
approach to the G21 region; and
- The capacity of G21 Geelong Region Alliance to be the organisation to
facilitate this approach across the region.