Controlled amine functionalization and hydrophilicity of a poly(lactic acid) fabric

The surface of PLA fabric has been successfully modified by pulsed plasma polymerization of heptylamine (PPHA) giving increased hydrophilicity and achieving a sufficient level of primary amine functionality (3.5%) for practical application in biotechnology. This is the first report that the density of primary amine (-NH2) in PPHA, quantified by chemical derivatization, can be controlled by selection of pulsed plasma conditions. The duty cycle and the average RF power were the key parameters for achieving both a higher density of primary amine and increased hydrophilicity.

Boron nitride colloidal solutions, ultralight aerogels and freestanding membranes through one-step exfoliation and functionalization

Manufacturing of aerogels and membranes from hexagonal boron nitride (h-BN) is much more difficult than from graphene or graphene oxides because of the poor dispersibility of h-BN in water, which limits its exfoliation and preparation of colloidal solutions. Here, a simple, one-step mechano-chemical process to exfoliate and functionalize h-BN into highly water-dispersible, few-layer h-BN containing amino groups is presented. The colloidal solutions of few-layer h-BN can have unprecedentedly high concentrations, up to 30 mg ml(-1), and are stable for up to several months. They can be used to produce ultralight aerogels with a density of 1.4 mg cm(-3), which is ∼1,500 times less than bulk h-BN, and freestanding membranes simply by cryodrying and filtration, respectively. The material shows strong blue light emission under ultraviolet excitation, in both dispersed and dry state.

One-step amino-functionalization of milled carbon fibre for enhancement of thermo-physical properties of epoxy composites

Development of new chemical approaches for preparation of engineered carbon-based fillers is critical for high-performance applications. Herein, an efficient method for covalent functionalization of polyacrylonitrile-based carbon fibre through azo radical addition under mild condition is demonstrated. In this way, isobutyronitrile radicals in situ produced from thermal decomposition of 2,2′-azobisisobutyronitrile (AIBN), were covalently grafted on milled carbon fibre (MCF) surface, assisted by microwave irradiation, as evidenced by FTIR, Raman, and TGA analysis. The grafted isobutyronitriles on MCF surface (n-MCF) were applied for further MCF amino-functionalization (a-MCF) via nucleophilic reaction of an amine-rich compound. Then, both pure MCF and a-MCF were incorporated into epoxy matrix; and its curing process and thermo-physical properties were investigated using DSC, rheometry, DMA, TGA, and flexural analysis. The Tg and flexural strength of epoxy/a-MCF composites, compared to epoxy/MCF, increased by ∼3.5% and ∼10.2%, resulting from good adhesion between a-MCF and epoxy matrix which confirmed by SEM observations.