Hydrolysis of dinuclear spacer-bridged diorganotin(IV) triflates. A novel cationic double ladder with supramolecular association

A series of oligomethylene-bridged diorganotin triflates R(OTf)₂Sn(CH₂)_nSn(OTf)₂R (R = CH₂SiMe₃; n = 3, 4, 8, 10) were synthesized by reaction of triflic acid with the precursor oxides R(O)Sn(CH₂)_nSn(O)R. On the basis of ¹¹⁹Sn NMR (in acetonitrile) the triflates appear to be the simple six-coordinated ionic species [(MeCN)₄(RSn(CH₂)_nSnR)(MeCN)₄]²⁺. These triflates readily undergo hydrolysis to give products, the identity of which depends on the length of the oligomethylene bridge. For n = 3 (5), the solid-state structure shows association of two dimeric units, which results in a tetracationic double ladder. Extensive hydrogen bonding gives rise to a supramolecular association. Solution ¹¹⁹Sn NMR and ES MS suggest some dissociation of 5 into dimers containing four tin atoms and possibly monomers containing two tin atoms. A rudimentary solid-state structure for n = 4 (6) indicates a linear polymer based on dimeric (four tin atoms) units. The structure of 6 also features extensive hydrogen bonding, this time effectively giving rise to alternating layers of cations and anions.

The charge effect of cationic surfactants on the elimination of fibre beads in the electrospinning of polystyrene

Polystyrene nanofibres were electrospun with the inclusion of cationic surfactants, dodecyltrimethylammonium bromide (DTAB) or tetrabutylammonium chloride (TBAC), in the polymer solution. A small amount of cationic surfactant effectively stopped the formation of beaded fibres during the electrospinning. The cationic surfactants were also found to improve the solution conductivity, but had no effect on the viscosity. Only DTAB had an effect on the surface tension of the polymer solution, the surface tension decreasing slightly with an increase in the concentration of DTAB.

The formation of beaded fibres was attributed to an insufficient stretch of the filaments during the whipping of the jet, due to a low charge density. Adding the cationic surfactants improved the net charge density that enhanced the whipping instability. The jet was stretched under stronger charge repulsion and at a higher speed, resulting in an exhaustion of the bead structure. In addition, a polymer/surfactant interaction was found in the polystyrene–DTAB solution system, while this interaction was not found in the polystyrene–TBAC system. The polymer/surfactant interaction led to the formation of thinner fibres than those formed in the absence of the interaction.

The effects of a non-ionic surfactant, Triton X-405, on the electrospun fibres were also studied. The addition of Triton X-405 did not eliminate the fibre beads, but reduced the bead numbers and changed the morphology. Triton X-405 slightly improved the solution conductivity, and had a minor effect on the surface tension, but no effect on the viscosity.

Effects of polymer concentration and cationic surfactant on the morphology of electrospun polyacrylonitrile nanofibres

PAN nanofibres were prepared via an electrospinning process. The effect of polymer concentration on the fibre morphology was studied. At a very dilute solution, no fibres were obtained in the electrospinning process. As the concentration increased, the fibre morphology evolved from a beads-on-string structure to a uniform fibre structure with increasing fibre diameters. However, when the same electrospinning process was conducted with the addition of a cationic surfactant, the formation of disconnected beads was prevented, and the number of beads-on-string structures reduced significantly. In addition, the presence of cationic surfactant reduced the average diameter of the electrospun PAN nanofibres.

Self-assembly and film stability of a micelle of a single-chain quaternary ammonium amphiphile containing azobenzene on mica

The self-assembling behavior of a single-chain quaternary ammonium amphiphile bearing azobenzene (C₁₂AzoC₆N⁺) on freshly cleaved mica sheet has been investigated by atomic force microscopy (AFM) method. Confocal microscopic Raman spectra confirm the adsorption of the self-assembled monolayer structure. Ex-situ AFM reveals that C₁₂AzoC₆N⁺ forms branch-like stripes indicating the fusion and reorganization of the micelles during drying in air as the in-situ AFM has revealed that surfactant forms spherical micelles on the mica surface. The nano-sized surface structure is strongly dependent on the change of molecular structure, which resulted from photo-induced isomerization. The nano-sized stripe is quite stable even being annealed at 90 °C for 4 h.

Monolayer behavior of a pyridyl head-group-containing amphiphile and its miscibility with poly(D,L-lactide-co-glycolide) on different pH subphase

In this paper, we investigated the Langmuir film and Langmuir–Blodgett (LB) monolayer film of a nonionic amphiphilic molecule, 4-(6-p-pyridyloxyl)hexyloxyl-4′-dodecyloxylazobenzene (C12AzoC6Py) and its mixture with poly(d,l-lactide-co-glycolide) (PLG) at different subphase pH values (2.0, 2.6, 3.3, 4.4, and 6.5, respectively) by surface pressure–area (π–A) isotherms, in situ interface Brewster angle microscopy (BAM), and ex situ atomic force microscopy (AFM). For pure C12AzoC6Py, its π–A isotherms display a plateau when the subphase pH value is lower than 3.0. The pressure of the plateau increases with the decrease of pH until 2.0. Over the plateau, the π–A isotherms become almost identical to the one under neutral conditions. The appearance of such a plateau can be explained as the coexistence of protonation and unprotonation of pyridyl head groups of the employed amphiphile. In contrast to the homogeneous surface morphology of pure C12AzoC6Py near the plateau by BAM observation, the surface in the case of its mixing with PLG exhibits a dendritic crystalline state under low surface pressure at subphase pH lower than 3.0. The crystalline state becomes soft and gradually melts into homogeneous aggregates with surface pressure increasing to a higher value than that of the plateau. Meanwhile, the hydrolysis of PLG in the mixture system at the interface has been affirmed to be restrained to a very large extent. And the PLG was believed to be compelled to the up layer of the LB film due to the phase separation, which is examined by AFM. Based on the experimental results, the corresponding discussion was also performed.

New Compounds Bearing [M(S2O7)3]2– Anions (M = Si, Ge, Sn): Syntheses and Characterization of A2[Si(S2O7)3] (A = Na, K, Rb), A2[Ge(S2O7)3] (A = Li, Na, K, Rb, Cs), A2[Sn(S2O7)3] (A = Na, K), and the Unique Germanate Hg2[Ge(S2O7)3]Cl2 with Cationic 1∞[

The reaction of the group 14 tetrachlorides MCl4 (M = Si, Ge, Sn) with oleum (65 % SO3) at elevated temperatures led to the unique anionic complexes [M(S2O7)3]2– that show the central M atoms in coordination of three chelating S2O72– groups. The mean distances M–O within the complexes increase from 175 pm (M = Si) via 186 pm (M = Ge) up to 200 pm (M = Sn). The charge balance for the [M(S2O7)3]2– anions is achieved by alkaline metal ions A+ (A = Li, Na, K, Rb, Cs) which were implemented in the syntheses in form of their sulfates. The size of the A+ ions, i.e. their coordination requirement causes the crystallographic differences in the crystal structures, while the structure of the complex [M(S2O7)3]2– anions remains essentially unaffected. Furthermore, we were able to characterize the unique germanate Hg2[Ge(S2O7)3]Cl2 which forms when HgCl2 is added as a source for the counter cation. The Hg2+ and the Cl– ions form infinite cationic chains according to 1∞[HgCl2/2]+ which take care for the charge compensation. For selected examples of the compounds the thermal behavior has been monitored by means of thermal analyses and X-ray powder diffraction. For A being an alkaline metal the decomposition product is a mixture of the sulfates A2SO4 and the dioxides MO2, whereas Hg2[Ge(S2O7)3]Cl2 shows a more complicated decomposition. The tris-(disulfato)-silicate Na2[Si(S2O7)3] has additionally been examined by solid state 29Si and 23Na NMR spectroscopic measurements.

Synthesis and comparative physical-chemical characterisation of neutral and cationic amphiphiles using RP-HPLC

A series of norbornane containing amphiphiles was synthesized, their lipophilicity corresponding to neutral and cationic forms was then investigated using reverse phase HPLC (High Performance Liquid Chromatography). This series of amphiphiles incorporated varied lipophilic chain length and also varied distances between the polar/cationic head group from the norbornane scaffold. Our investigation included studying the impact of the stationary phase as a replication of a membrane for both cationic and neutral amphiphiles. The choice of stationary phase was shown to be a very important consideration for this type of measurement. In this connection, C18, Cyano and Polar columns were all investigated, the cyano column was observed to be the optimal stationary phase for the comparison of both charged and neutral amphiphiles.

Synthesis and evaluation of cationic norbornanes as peptidomimetic antibacterial agents

A series of structurally amphiphilic biscationic norbornanes have been synthesised as rigidified, low molecular weight peptidomimetics of cationic antimicrobial peptides. A variety of charged hydrophilic functionalities were attached to the norbornane scaffold including aminium, guanidinium, imidazolium and pyridinium moieties. Additionally, a range of hydrophobic groups of differing sizes were incorporated through an acetal linkage. The compounds were evaluated for antibacterial activity against both Gram-negative and Gram-positive bacteria. Activity was observed across the series; the most potent of which exhibited an MIC's ≤ 1 μg mL(-1) against Streptococcus pneumoniae, Enterococcus faecalis and several strains of Staphylococcus aureus, including multi-resistant methicillin resistant (mMRSA), glycopeptide-intermediate (GISA) and vancomycin-intermediate (VISA) S. aureus.

A new class of eight-membered Sn2P2O4 heterocycles. Crystal structure and electrolytic dissociation in solution of cyclo-[R2Sn(OPPh2O)2SnR2](O3SCF3)2(R=Me, t-Bu)

The syntheses of cyclo-[R₂Sn(OPPh₂O)₂SnR₂](O₃SCF₃)₂ (R = Me (1), t-Bu (2)) by the consecutive reaction of R₂SnO (R = Me, t-Bu) with triflic acid and diphenylphosphinic acid are presented. In the solid state, 1 and 2 were investigated by ¹¹⁹Sn MAS and ³¹P MAS NMR spectroscopy as well as X-ray crystallography and appear to exist as ion pairs of cyclo-[R₂Sn(OPPh₂O)₂SnR₂]²⁺ dications and triflate anions. In solution, 1 and 2 are involved in extensive equilibria processes featuring cationic diorganotin(IV) species with Sn-O-P linkages, as evidenced by ¹¹⁹Sn and ³¹P NMR spectroscopy, electrospray mass spectrometry, and conductivity measurements.