Molecular-level dispersion of graphene into epoxidized natural rubber: Morphology, interfacial interaction and mechanical reinforcement

The interfacial interaction of composites dominates the properties of polymeric/inorganic nanocomposites. Herein, epoxy and hydroxyl groups are introduced into the natural rubber (NR) molecular chains to anchor oxygenous functional groups on the surface of graphene oxide (GO) sheets and therefore enhance the interfacial interaction between GO and rubber. From the morphological observation and interaction analysis, it is found that epoxidized natural rubber (ENR) latex particles are assembled onto the surfaces of GO sheets by employing hydrogen bonding interaction as driving force. This self-assembly depresses restacking and agglomeration of GO sheets and leads to homogenous dispersion of GO within ENR matrix. The formation of hydrogen bonding interface between ENR and GO demonstrates a significant reinforcement for the ENR host. Compared with those of pure ENR, the composite with 0.7 wt% GO loading receives 87% increase in tensile strength and 8.7 fold increase in modulus at 200% elongation after static in-situ vulcanization.

Experimental investigation on bonding properties of reactive liquid rubber epoxy in CFRP retrofitted concretet members

The load bearing capacity of aging reinforced concrete structures, such as bridges, is increasingly extended with the use of Carbon Fibre Reinforced Polymer (CFRP). Premature failure, which is attributed to the rigid behaviour of the bonding agent (epoxy resin) and the high stresses at the interface region, can occur because of the debonding of CFRP sheets from host surfaces. To overcome the debonding issue, the epoxy resin is modified by different reactive liquid polymers to improve its toughness, flexibility, adhesion, and impact resistance. This study reports the usage of two reactive liquid polymers, namely, liquid Carboxyl-Terminated Butadiene-Acrylonitrile (CTBN) and liquid Amine-Terminated Butadiene-Acrylonitrile (ATBN), to improve the mechanical properties of the commercially available MBrace saturant resin when added to a ratio of 100:30 by weight. The neat and modified epoxies were analysed using the Dynamic Mechanical Thermal Analysis (DMTA) to determine and compare the storage modulus and glass transition temperatures of these materials. Moreover, the bonding strength of neat and modified epoxies was evaluated through single-lap shear tests on CFRP sheets bonded to concrete prisms. The results indicate that the modified resins exhibited improved ductility and toughness and became reasonably flexible compared with the neat epoxy resin. The improved properties will help delay the premature debonding failure in CFRP retrofitted concrete members.

Dynamic performance of duolayers at the air/water interface. 1. Experimental analysis

Understanding, and improving, the behavior of thin surface films under exposure to externally applied forces is important for applications such as mimicking biological membranes, water evaporation mitigation, and recovery of oil spills. This paper demonstrates that the incorporation of a water-soluble polymer into the surface film composition, i.e., formation of a three-duolayer system, shows improved performance under an applied dynamic stress, with an evaporation saving of 84% observed after 16 h, compared to 74% for the insoluble three-monolayer alone. Canal viscometry and spreading rate experiments, performed using the same conditions, demonstrated an increased surface viscosity and faster spreading rate for the three-duolayer system, likely contributing to the observed improvement in dynamic performance. Brewster angle microscopy and dye-tagged polymers were used to visualize the system and demonstrated that the duolayer and monolayer system both form a homogeneous film of uniform, single-molecule thickness, with the excess material compacting into small floating reservoirs on the surface. It was also observed that both components have to be applied to the water surface together in order to achieve improved performance under dynamic conditions. These findings have important implications for the use of surface films in various applications where resistance to external disturbance is required.

Observation of inter- and intramolecular C---H...F hydrogen bonding in Gingras' salt: [n-Bu4N]+[Ph3SnF2]-

The crystal and molecular structure of Gingras' salt [n-Bu₄N]^₊ [Ph₃SnF₂]⁻ is reported, which reveals a variety of inter- and intramolecular C---H...F hydrogen bonding interactions. A ¹¹⁹Sn MAS-NMR spectrum was recorded and a tensor analysis has been performed according to the method of Herzfeld and Berger. The results are discussed in terms of the molecular structure and are compared with the parent compound Ph₃SnF as well as with Mes₃SnF (Mes=mesityl).

Designing the temporal aspects of the user interface: Views from the coal face

We aim to support user interface designers in capturing, representing and reasoning about temporal information. We have developed a method to support user interface designers in considering how the temporal aspects of software impact the user. Importantly the method is based on a detailed analysis of data from a set of situated interviews that capture the views of practicing user interface designers. This paper discusses the background research and the motivation for the method.

Survey commentaries and analysis on SWOT analysis of Singapore biotechnology boom indicators

The article presents survey commentaries and analysis on Strengths, Weaknesses, Opportunities and Threats (SWOT) analysis of biotechnology boom indicators in Singapore as of April 2006. SWOT is the process whereby the strengths and weaknesses in the internal environment are analyzed in association with the opportunities and threats arising from the external environment. The success of Singapore's biotechnology sector depends on the effectiveness and efficiency of the interface between the external and internal environments. The strengths, weaknesses, opportunities, and threats in the industry are discussed.

The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding

The solid-state reactions of Ti/Al multilayered samples produced by Accumulative Roll Bonding (ARB) have been investigated using differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. The kinetics of the formation of the intermetallic compound TiAl3 was highlighted. Experimental evidence and analysis of the data shows that, there was a two-stage process in the formation of TiAl₃ in the ARB Ti/Al reactive multilayered samples. Calorimetric and microstructural analyses also suggest that the interdiffusion of Al and Ti which led to solid solutions preceded the formation of intermetallic compounds. Despite the apparent chaos in the thickness of the ARB multilayered samples, the distribution of layer spacing did not become broad enough to lose the main features of the double exothermal behaviour. Isothermal DSC shows a larger Avarami constant in ARB Ti/Al multilayered structures than was found in Ti/Al thin films. A modified model based on thin films was set up to describe the kinetic characteristics of the formation of the intermetallic compound TiAl₃ in ARB samples.

Computational thermal analysis of a continuous flow micro Polymerase Chain Reaction (PCR) chip

The first continuous flow micro PCR introduced in 1998 has attracted considerable attention for the past several years because of its ability to amplify DNA at much faster rate than the conventional PCR and micro chamber PCR method. The amplification is obtained by moving the sample through 3 different fixed temperature zones. In this paper, the thermal behavior of a continuous flow PCR chip is studied using commercially available finite element software. We study the temperature uniformity and temperature gradient on the chip’s top surface, the cover plate and the interface of the two layers. The material for the chip body and cover plate is glass. The duration for the PCR chip to achieve equilibrium temperature is also studied.

A study on the formation of MgAl2O4 and MgO crystals in Al-Mg/quartz composite by differential thermal analysis

The present study has examined the thermodynamics of MgAl₂O₄ and MgO formations in Al–Mg alloy/quartz (>99% crystalline silica) through differential thermal analysis (DTA). The formation of MgAl₂O₄ and MgO is detected as exothermic peaks in the heat flow curve and the reaction is confirmed by the Si dissolution peaks observed during the reheating of samples and SEM analysis of the reacted sample. The presence of MgAl₂O₄ and MgO is confirmed in the XRD analysis of the reacted sample. The study has enabled the production of nano sized MgAl₂O₄ and MgO crystals at the interface of Al–Mg alloy and quartz. The reaction between them is found to be influenced by the oxidation of Mg, which is reduced by increasing heating rates.

The assessment of тт-тт selective stationary phases for two-dimensional HPLC analysis of foods : application to the analysis of coffee

Differences between alkyl, dipole–dipole, hydrogen bonding, and π-π selective surfaces represented by non-resonance and resonance π-stationary phases have been assessed for the separation of ‘Ristretto’ café espresso by employing 2DHPLC techniques with C18 phase selectivity detection. Geometric approach to factor analysis (GAFA) was used to measure the detected peaks (N), spreading angle (β), correlation, practical peak capacity (n_p) and percentage usage of the separations space, as an assessment of selectivity differences between regional quadrants of the two-dimensional separation plane. Although all tested systems were correlated to some degree to the C18 dimension, regional measurement of separation divergence revealed that performance of specific systems was better for certain sample components. The results illustrate that because of the complexity of the ‘real’ sample obtaining a truly orthogonal two-dimensional system for complex samples of natural origin may be practically impossible.

Atom probe microscopy of self-assembled monolayers : preliminary results

We have achieved three-dimensional imaging of decanethiol self-assembled monolayers (SAMs) on metal surfaces by atom probe tomography (APT). The present Letter provides preliminary results on Ni [001] and Au [111], shows the analytical potential of APT analysis of SAMs, and details developments in specimen preparation and in data-treatment methodologies. Importantly, the investigation of the mass spectra from analysis of the SAMs revealed no combination of sulfur and hydrogen at the interface between the metal substrates and the organic materials, potentially providing insight about the bonding of the thiols on the substrate.

Interface slip control for CFRP-concrete composite beams

Carbon fibre reinforced polymer (CFRP) has been used frequently to retrofit concrete structures. Strengthening efficiency is related to the CFRP application process and the characteristics of the bonding agent. In this paper the mechanism of interface shear behaviour in CFRP to concrete beams is discussed considering previous test observations and mathematical models. This paper then discusses the consequences of introducing interface slip which reduces the integrity of the composite section, however improve ductility and delay debonding failure. The paper suggests that using softer bonding agent as well as setting limits on the interface slip could ensure acceptable serviceability and ductile behaviour.

Design and analysis of a multilayer localized surface plasmon resonance graphene biosensor

This paper describes a multilayer localized surface plasmon resonance (LSPR) graphene biosensor that includes a layer of graphene sheet on top of the gold layer, and the use of different coupled configuration of a laser beam. The study also investigates the enhancement of the sensitivity and detection accuracy of the biosensor through monitoring biomolecular interactions of biotin-streptavidin with the graphene layer on the gold thin film. Additionally, the role of thin films of gold, silver, copper and aluminum in the performance of the biosensor is separately investigated for monitoring the binding of streptavidin to the biotin groups. The performance of the LSPR graphene biosensor is theoretically and numerically assessed in terms of sensitivity, adsorption efficiency, and detection accuracy under varying conditions, including the thickness of biomolecule layer, number of graphene layers and operating wavelength. Enhanced sensitivity and improved adsorption efficiency are obtained for the LSPR graphene biosensor in comparison with its conventional counterpart; however, detection accuracy under the same resonance condition is reduced by 5.2% with a single graphene sheet. This reduction in detection accuracy (signal to noise ratio) can be compensated for by introducing an additional layer of silica doped B2O3 (sdB2O3) placed under the graphene layer. The role of prism configuration, prism angle and the interface medium (air and water) is also analyzed and it is found that the LSPR graphene biosensor has better sensitivity with triangular prism, higher prism angle, lower operating wavelength and larger number of graphene layers. The approach involves a plot of a reflectivity curve as a function of the incidence angle. The outcomes of this investigation highlight the ideal functioning condition corresponding to the best design parameters.