Correlation of throwing velocity to the results of lower-body field tests in male college baseball players

Baseball-specific athleticism, potential, and performance have been difficult to predict. Increased muscle strength and power can increase throwing velocity but the majority of research has focused on the upper body. The present study sought to determine if bilateral or unilateral lower-body field testing correlates with throwing velocity. Baseball throwing velocity scores were correlated to the following tests: medicine ball (MB) scoop toss and squat throw, bilateral and unilateral vertical jumps, single and triple broad jumps, hop and stop in both directions, lateral to medial jumps, 10- and 60-yd sprints, and both left and right single-leg 10-yd hop for speed in 42 college baseball players. A multiple regression analysis (forward method), assessing the relationship between shuffle and stretch throwing velocities and lower-body field test results determined that right-handed throwing velocity from the stretch position was most strongly predicted by lateral to medial jump right (LMJR) and body weight (BW; R = 0.322), whereas lateral to medial jump left (LMJL; R = 0.688) predicted left stretch throw. Right-handed shuffle throw was most strongly predicted by LMJR and MB scoop (R = 0.338), whereas LMJL, BW, and LMJR all contributed to left-handed shuffle throw (R = 0.982). Overall, this study found that lateral to medial jumps were consistently correlated with high throwing velocity in each of the throwing techniques, in both left-handed and right-handed throwers. This is the first study to correlate throwing velocity with a unilateral jump in the frontal plane, mimicking the action of the throwing stride.

Effects of approach velocity and foot-target characteristics on the visual regulation of step length

Two questions emerge from the literature concerning the perceptual-motor processes underlying the visual regulation of step length. The first concerns the effects of velocity on the onset of visual control (VCO), when visual regulation of step length begins during goal-directed locomotion. The second concerns the effects of different obstacles such as a target or raised surface on step length regulation. In two separate experiments, participants (Experiment 1 & 2: n=12, 6 female, 6 male) walked, jogged, or sprinted towards an obstacle along a 10 m walkway, consisting of two marker-strips with alternating black and white 0.50 m markings. Each experiment consisted of three targeting or obstacle tasks with the requirement to both negotiate and continue moving (run-through) through the target. Five trials were conducted for each task and approach speed, with trials block randomised between the six participants of each gender. One 50 Hz video camera panned and filmed each trial from an elevated position, adjacent to the walkway. Video footage was digitized to deduce the gait characteristics. Results for the targeting tasks indicate a linear relationship between approach velocity and accuracy of final foot placement (r=0.89). When foot placement was highly constrained by the obstacle step length shortened during the entire approach. VCO was found to occur at an earlier tau-margin for lower approach velocities for both experiments, indicating that the optical variable ‘tau' is affected by approach velocity. A three-phase kinematic profile was found for all tasks, except for the take-off board condition when sprinting. Further research is needed to determine whether this velocity affect on VCO is due to ‘whole-body' approach velocity or whether it is a function of the differences between gait modes.

The influence of object-image velocity change on perceived heading in minimal environments

When human observers move forward and rotate their eyes, a complex pattern of light flows across the retina. This pattern is referred to as retinal flow. A model has been proposed to explain how humans perceive their direction of self-movement (or heading) from (1) static depth, (2) direction of image motion, and (3) whether image velocity undergoes acceleration or deceleration (Wang & Cutting, 1999). However, findings from past research in which sparse or minimalist stimuli were used have suggested that not all of the information to which participants are sensitive is captured within the scope of this model. In particular it has been suggested that the magnitude or size of image velocity change may be of significance beyond simply whether image velocity could be categorized as speeding up (i.e., accelerating) or slowing down (i.e., decelerating). In two experiments, the influence of this factor on heading judgments under minimal conditions was investigated. Evidence was found in support of the idea that the rate of image velocity change can influence judgments of the direction of self-movement in minimalist conditions.

How well does club head speed correlate with gold handicaps?

The velocity at which a golf club impacts with a golf ball is known as club head speed. Although club head speed has been used to measure performance changes in a number of golf studies, it has not been validated as a golf performance measure. As handicap is the usual measure of performance, the purpose of this study was to investigate the relationship between club head speed and handicap, and to determine whether club head speed at impact is a valid measure of golfing performance. Forty-five male golfers aged 18–80 years, all with registered golfing handicaps (2–27), participated in this study. Each golfer performed 10 golf swings captured by a high-speed camera. Golfers' club head speeds were determined using Video Expert 2, a biomechanical computer program. Golfers with a lower handicap (ie, a better skill level) had faster club head speeds than higher handicap golfers. Linear regression analysis found club head speed to be highly correlated with handicap (r= 0.950). This relationship was described by the equation: In (club head speed)= 4.065 − 0.0214 x handicap. In conclusion, this study has shown that club head speed is a valid indicator of performance in golfers and may therefore be a useful performance measure in future laboratory-based studies.

An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process

A novel fabrication process for advanced composite components—the QuicktepTM process was described. 2/2 twill weave MTM56/CF0300 carbon epoxy composite laminates were manufactured by the Quickstep and the autoclave processes. The response of these laminates to drop-weight low velocity impact at energy levels ranging from 5 to 30 J was investigated. It was found that the laminates fabricated by the Quickstep had better impact damage tolerance than those fabricated by the autoclave. Optical microscopy revealed extensive matrix fracture in the center of the backside of the autoclave laminates indicating the more brittle property of the epoxy matrix cured by the autoclave process. Interfacial shear strength (IFSS) for two composite systems were measured by micro–debond experiments. The MTM56/CF0300 material cured by the Quickstep showed stronger fibre matrix adhesion. Since the thickness and density of the impact targets produced by two processes were different, finite element analysis (FEA) was performed to study the effect of these factors on the impact response. The simulation results showed that the difference in thickness and density affects the stress distribution under impact loading. Higher thickness and lower density caused by processing lead to less endurance to drop weight impact loading. Therefore the better performance of Quickstep laminates under impact loading was not due to the thickness and density change, but resulted from stronger mechanical properties.

Maternal and neonatal influences on, and reproducibility of, neonatal aortic pulse wave velocity

Aortic pulse wave velocity (aPWV), a noninvasive measure of vascular stiffness, is an independent predictor of cardiovascular disease both before and in overt vascular disease. Its characteristics in early life and its relationship to maternal factors have hardly been studied. To test the hypothesis that infant aPWV was positively related to maternal anthropometry and blood pressure (BP) at 28 weeks gestation, after adjusting for neonatal anthropometry and BP, 148 babies born in Manchester were measured 1 to 3 days after birth. A high reproducibility of aPWV, assessed in 30 babies within 3 days of birth, was found with a mean difference between occasions of –0.04 m/s (95% CI: –0.08 to 0.16 m/s). Contrary to our hypothesis, a significant inverse relation was found between neonatal aPWV (mean: 4.6 m/s) and maternal systolic BP (mean: 108.9 mm Hg; r=–0.57; 95% CI: –0.67 to –0.45) but not maternal height nor weight. Neonatal aPWV was positively correlated with birth length, birth weight, and systolic BP. In multiple regression, neonatal aPWV remained significantly inversely associated with maternal systolic BP (adjusted ß coefficient: –0.032; 95% CI: –0.040 to –0.024; P<0.001), after adjustment for maternal age, birth weight, length, and neonatal BP (all independently and positively related to aPWV) and for gestational age, maternal weight, and height (unrelated). These results suggest that infant aPWV may be a useful index of infant vascular status, is less disturbing to measure than infant BP, and is sensitive to the gestational environment marked by maternal BP.

Clinical measurement of muscle tone using a velocity-corrected modified ashworth scale

Objective: To develop a new form of the modified Ashworth scale (MAS) for muscle-tone assessment that combines the MAS score with the passive muscle-stretching velocity during the assessment of muscle tone, resulting in a measure that has higher intertester reliability than the MAS.

Design: Twanty-two volunteer subjects with spinal cord injuries at a tertiary care outpatient and inpatient spinal cord injury rehabilitation center affiliated with a university were recruited for this study.

Results: A decision tree in which V-MAS scores were obtained was developed. The data obtained from three independent raters, when adjusted by means of the V-MAS, showed an excellent interrater reliability.

Conclusions: Results indicated that the V-MAS is a more reliable measure. In addition, the resulting units of the V-MAS, ranging from 0 to 1, are of the same form as pendulum test data. The V-MAS method is quite simple to use because the rater need only measure the angular range and duration of the passive movement to calculate average velocity during the MAS assessment in addition to the normal MAS rating of muscle tone.

Time-to-Collision (TTC) judgements with offsize objects show that Tau needs to be intergrated with familiar size to explain TTC performance

Observers judged TTC with computer-generated displays simulating an approaching object in three familiar-size conditions:

(i) Real-size (smaller, larger objects depicted as tennis, soccer balls respectively).
(ii) Off-size (smaller, larger objects depicted as soccer, tennis balls respectively).
(iii) Ambiguous-size (smaller, larger objects depicted as texture-less black balls of different size).

Displays simulated objects approaching observersí viewpoint from 24.96 m, and disappearing at 5.76 m. Manipulation of approach velocities (4.8-19.2 msec-1) produced viewing times from 1.0 to 4.0 sec, and delays between object disappearance and tau-based TTC ranging from 0.3 to 1.2 sec. Motion characteristics of smaller and larger objects in the three familiar-size conditions simulated those of approaching real-sized tennis and soccer balls respectively; that is, for each approach velocity, tau‚-based TTC was the same across the three conditions for smaller and larger objects.

Results showed that, consistent with the proposition of tau-determined TTC, TTC estimates in the real-size condition were uninfluenced by object size. This is contrary to previous reports that TTC for larger objects is underestimated relative to TTC for smaller objects. However, such size-dependent TTC differences were found in the ambiguous-size condition, with even larger differences in the off-size condition; TTCs for the ëlargerí tennis ball were much less than TTCs to the ësmallerí soccer ball compared to corresponding TTCs in the ambiguous-size condition. These results are problematic for the proposition that tau solely determines TTC. We discuss the role of perceptual learning in resolving this problem.

Buchenwald ball

A celebratory story about a group of orphans from the holocaust who found their way to Australia and became a family. In 2006 they held the 60th anniversary Buchenwald Ball.

Synthesis of ZnO nanowires using ball-milling and annealing method

Nanowires represent a new class of ZnO morphologies with many exiting new properties and applications. The research in the synthesis and characterization of ZnO nanowires has received enormous attention in recent years. However, most synthesis methods using vapor deposition process can only produce small amount of sample, mass production has not been achieved yet. Large-quantity production of ZnO nanowires needs to be realized for large-scale property and application studies. One of the promising approaches to the large scale synthesis is a ball-milling and annealing method. This paper first introduces several common synthesis methods of ZnO nanowires and then summarizes the one dimensional nanomaterials produced by the ball milling and annealing method. Finally, some preliminary results of ZnO nanowire synthesis are presented.

Conical boron nitride nanorods synthesized via the ball-milling and annealing method

A boron nitride (BN) nanostructure, conical BN nanorod, has been synthesized in a large quantity on Si substrates for the first time via the ball-milling and annealing method. Nitridation of milled boron carbide (B₄C) powders was performed in nitrogen gas at 1300°C on the surface of the substrates to form the BN nanorods. The highly crystallized nanorods consist of conical BN basal layers stacked along the nanorod axis. Ball milling of the B₄C powders can significantly enhance the nitridation of the powders and thus facilitate the formation of nanorods during the annealing process.

Efficient production of ZnO nanowires by a ball milling and annealing method

ZnO powder was mechanically milled in a ball mill. This procedure was found to greatly increase its evaporation ability. The anomalous evaporation behaviour was caused by the disordered structure of the milled material and was not related to the increase in its surface area after milling. ZnO nanowires were synthesized by evaporation of this milled precursor. Nanowires with smooth and rough surfaces were present in the sample; the latter morphology was dominant. A green emission band centred at 510 nm was dominant in the cathodoluminescence spectrum of the nanowires.