In situ formation of BN nanotubes during nitriding reactions

High-yield multiwalled boron nitride (BN) nanotubes have been produced using a ball milling-annealing method. The BN nanotubes with a diameter less than 10 nm and a well-crystallized multiwalled structure were formed via an in situ nitriding reaction. The systematic investigation of the formation process at different annealing temperatures and for different times suggested that the formation of the unique multiwalled structure was attributed by a two-dimensional growth of the BN phase and a nonmetal catalytic growth.

C-BN single-walled nanotubes from hybrid connection of BN/C nanoribbons : prediction by ab initio density functional calculations

We demonstrated for the first time by ab initio density functional calculation and molecular dynamics simulation that C0.5(BN)0.5 armchair single-walled nanotubes (NT) are gapless semiconductors and can be spontaneously formed via the hybrid connection of graphene/BN Nanoribbons (GNR/BNNR) at room temperature. The direct synthesis of armchair C0.5(BN)0.5 via the hybrid connection of GNR/BNNR is predicted to be both thermodynamically and dynamically stable. Such novel armchair C0.5(BN)0.5 NTs possess enhanced conductance as that observed in GNRs. Additionally, the zigzag C0.5(BN)0.5 SWNTs are narrow band gap semiconductors, which may have potential application for light emission. In light of recent experimental progress and the enhanced degree of control in the synthesis of GNRs and BNNR, our results highlight an interesting avenue for synthesizing a novel specific type of C0.5(BN)0.5 nanotube (gapless or narrow direct gap semiconductor), with potentially important applications in BNC-based nanodevices.

Direct observation of defect levels in hexagonal BN by soft X-ray absorption spectroscopy

Formation of defects in hexagonal boron nitride under low-energy argon bombardment has been studied by near-edge X-ray absorption fine structure (NEXAFS) around B and N K-edges. Breaking of B-N bonds and creation of nitrogen vacancies has been identified from the B K-edge, followed by the formation of molecular nitrogen, N2, at interstitial positions. The presence of N2 produces a sharp resonance in the low-resolution NEXAFS spectra around N K-edge, showing the characteristic vibrational fine structure in high-resolution measurements. Several new peaks in NEXAFS spectra have been assigned to boron or nitrogen interstitials, in good agreement with theoretical predictions. © 2009 Elsevier B.V. All rights reserved.

Magnetism of C adatoms on BN nanostructures : implications for functional nanodevices

Spin-polarized density functional calculations reveal that magnetism can be induced by carbon adatoms on boron nitride nanotubes (BNNTs) and BN hexagonal sheets. As a result of the localization of impurity states, these hybrid sp-electron systems are spin-polarized, with a local magnetic moment of 2.0 μB per C adatom regardless of the tube diameter and the bonding between the C atom and the BNNTs/BN sheets. An analysis of orbital hybridization indicates that two valence electrons participate in the bonding and the remaining two electrons of the C adatom are confined at the adsorption site and contribute to the magnetism accordingly. The effective interaction distance between the C-induced magnetic moments is evaluated. In terms of the diffusion barrier and the adsorption energy of C adatoms on the BN nanotubes/ sheets, a fabrication method for BN-C-based functional nanodevices is proposed, and a series of virtual building blocks for functional devices are illustrated.

Template-free synthesis of functional 3D BN architecture for removal of dyes from water.

Three-dimensional (3D) architectures are of interest in applications in electronics, catalysis devices, sensors and adsorption materials. However, it is still a challenge to fabricate 3D BN architectures by a simple method. Here, we report the direct synthesis of 3D BN architectures by a simple thermal treatment process. A 3D BN architecture consists of an interconnected flexible network of nanosheets. The typical nitrogen adsorption/desorption results demonstrate that the specific surface area for the as-prepared samples is up to 1156 m(2) g(-1), and the total pore volume is about 1.17 cm(3) g(-1). The 3D BN architecture displays very high adsorption rates and large capacities for organic dyes in water without any other additives due to its low densities, high resistance to oxidation, good chemical inertness and high surface area. Importantly, 88% of the starting adsorption capacity is maintained after 15 cycles. These results indicate that the 3D BN architecture is potential environmental materials for water purification and treatment.

Superior adsorption of pharmaceutical molecules by highly porous BN nanosheets

Highly porous boron nitride nanosheets (BNNSs) were tested as a re-usable adsorbent for the removal of pharmaceuticals from aqueous solution. The BNNSs exhibit both unprecedentedly high adsorption capacities and excellent recyclability while maintaining their high adsorption capacity by a simple regeneration process. These advantages render BNNSs a promising material for water remediation applications.

On the fast track speeding nurses into the future: a two year Bachelor of Nursing for graduates of other disciplines

It has been suggested in nursing literature that a bachelor's degree should be the pre-requisite to professional nursing education and registration. The perceived advantages of graduates entering the nursing profession led faculty in the School of Nursing La Trobe University to introduce in 1997 an innovative two-year Bachelor of Nursing (BN) program, believed to be the first in Australia, for graduates of other disciplines. A problem-based learning (PBL) approach was selected to facilitate the teaching learning process. Data to evaluate the progress of the accelerated students were collected by examining their previous degree background, conducting a focus group discussion mid year and comparing the students' academic results with those completing the traditional three-year course. Findings indicate that students in the accelerated course were highly motivated but experienced significant stress. In part the stress emanated from the need to identify their own learning needs. However, despite their concerns most accelerated students scored at least as well both clinically and academically as traditional students. Moreover, in six of the seven final year subjects each group studied the accelerated students performed better.

Students perceptions of learning outcomes from group-based, problem-based teaching and learning activities

Objective: A study aimed at exploring the variation in perceptions of learning outcomes reported by undergraduate nursing students enrolled in a problem-based learning subject in a pre-registration Bachelor of Nursing course (BN).
Method: Students were asked to respond to four open-ended questions which focussed on their learning outcomes in the different teaching/learning modalities of the subject. Data were analysed in two phases using a modified phenomenographic analysis. In the first phase a set of categories of description were developed from the student responses to questions related to the learning modalities. In the second phase the individual responses were classified in terms of the categories. Finally, correlations between the learning modalities were identified. In this paper the approach to analysis, the process of category identification and the correlations between the learning modalities will be described and the implications for further research and teaching will be discussed.
Results: The findings indicated that there were two distinct groups of student responses. Inward focussed students who described outcomes in terms of their own learning and students whose focus was outward i.e. describing learning in terms of patient care and how learning relates to that care. Another important result shows the relationship between the learning modalities and outcomes. From the students' perspective, the most sophisticated outcomes of the lectures and laboratories were ideas and skills to be used and applied in clinical settings. Whereas, the group-based activities in which clinical problems were presented to the students in the form of Situation Improvement Packages (SIPS) focussed their attention on the clinical setting which constituted a preparation for the realities of clinical practice.
Conclusion: The findings from this study indicate that students perceive their learning in the group based teaching/learning modality (SIPS) as effective in focussing them on the reality of their role in the clinical practice environment while lectures and laboratories provided the skills and knowledge required for this setting.

Identifying dependency between secure messages for protocol analysis

Collusion attack has been recognized as a key issue in e-commerce systems and increasingly attracted people’s attention for quite some time in the literatures of information security. Regardless of the wide application of security protocol, this attack has been largely ignored in the protocol analysis. There is a lack of efficient and intuitive approaches to identify this attack since it is usually hidden and uneasy to find. Thus, this article addresses this critical issue using a compact and intuitive Bayesian network (BN)-based scheme. It assists in not only discovering the secure messages that may lead to the attack but also providing the degree of dependency to measure the occurrence of collusion attack. The experimental results demonstrate that our approaches are useful to detect the collusion attack in secure messages and enhance the protocol analysis.

Boron nitride nanotubes : pronounced resistance to oxidation

Boron nitride (BN) nanotubes have the same nanostructure as carbon nanotubes but are found to exhibit significant resistance to oxidation at high temperatures. Our systematic study has revealed that BN nanotubes are stable at 700 °C in air and that some thin nanotubes (diameter less than 20 nm) with perfect multiwalled cylindrical structure can survive up to 900 °C. Thermogravimetric analysis reveals an onset temperature for oxidation of BN nanotubes of 800 °C compared with only 400 °C for carbon nanotubes under the same conditions. This more pronounced resistance of BN nanotubes to oxidation is inherited from the hexagonal BN and also depends on the nanocrystalline structure. This high level of resistance to oxidation allows promising BN nanotube applications at
high temperatures

Light emission and excitonic effect of boron nitride nanotubes observed by photoluminescent spectra

Photoluminescent (PL) and optical absorption spectra of high-yield multi-wall BN nanotubes (BNNTs) were systematically investigated at room temperature in comparison with commercial hexagonal BN (h-BN) powder. The direct band gap of the BNNTs was determined to be 5.75 eV, just slightly narrower than that of h-BN powder (5.82 eV). Two Frenkel excitons with the binding energy of 1.27 and 1.35 eV were also determined. However, they were not a distinctive characteristic of the BNNTs as reported previously. Observed broad UV–visible–NIR light emission demonstrates the potential of the BNNTs as a nano light source.

Purification of boron nitride nanotubes

A purification process was developed for the first time for boron nitride (BN) nanotubes. BN nanotubes, prepared using a ball milling and annealing method, contain a high yield of nanotubes and a small amount of BN and metal catalyst particles. The metal particles can be dissolved in an HCl solution. Fine BN nanoparticles and thin layers were first converted to water soluble B₂O₃ via a partial oxidation treatment at 800 °C. The oxide particles and layers can then be dissolved in hot water. Thermogravimetric analysis has been used to determine an adequate oxidation temperature at which fine BN particles were oxidized.

An effective approach to grow boron nitride nanowires directly on stainless-steel substrates

When growing one-dimensional (1D) nanomaterials via the vapour–liquid–solid (VLS) model, the substrates usually need to be coated with a layer of catalyst film. In this study, however, an effective approach for the synthesis of boron nitride (BN) nanowires directly onto commercial stainless-steel foils has been demonstrated. Growth occurs by heating boron and zinc oxide (ZnO) powders at 1100 °C under a mixture of nitrogen and hydrogen gas flow (200 ml min−1). The stainless-steel foils played an additional role of catalyst besides substrate during the VLS growth of these BN nanowires. The as-synthesized nanowires emit strong photoluminescence (PL) bands at 515, 535 and 728 nm. In addition, we found that the gas flow rate and the hydrogen content in the gas mixture strongly affected the diameter and yield of the nanowires by changing the relative concentration of the nanowire growth species in the chamber.

Pure boron nitride nanowires produced from boron triiodide

A thick layer of pure boron nitride (BN) nanowires with a uniform diameter of 20 nm was synthesized for the first time using a CVD process with a new precursor of boron triiodide (BI3). Transmission electron microscopy revealed a nanocrystalline structure in the BN nanowires and the absence of any catalyst particle. Some BN nanowires self-assembled into thick threads up to several hundred micrometres long on top of the nanowire layer. The nitriding reactions and lack of catalyst suggest new formation mechanisms of the BN nanowires.

11B nuclear magnetic resonance study of boron nitride nanotubes prepared by mechano-thermal method

We reported ¹¹B nuclear magnetic resonance studies of boron nitride (BN) nanotubes prepared by mechano-thermal route. The NMR lineshape obtained at 192.493 MHz (14.7 T) was fitted with two Gaussian functions, and the ¹¹B nuclear magnetization relaxations were satisfied with the stretched–exponential function, exp[-(tlT₁)^(D+1)/6] (D: space dimension) at all temperatures. In addition, the temperature dependence of spin–lattice relaxation rates was well described by T_i^-1 = aT (a: constant, T: temperature) and could be understood in terms of direct phonon process. All the 11BNMR results were explained by considering the inhomogeneous distribution of the paramagnetic metal catalysts, such as α-Fe, Fe–N, and Fe₂ B, that were incorporated during the process of high-energy ball milling of boron powder and be synthesized during subsequent thermal annealing. X-ray powder diffraction as well as electron paramagnetic resonance (EPR) on BN nanotubes were also conducted and the results obtained supported these conclusions.