π-Selective stationary phases: (I) Influence of the spacer chain length of phenyl type phases on the aromatic and methylene selectivity of aromatic compounds in reversed phase high performance liquid chromatography

Phenyl type stationary phases of increasing spacer chain length (phenyl, methyl phenyl, ethyl phenyl, propyl phenyl and butyl phenyl, with 0–4 carbon atoms in the spacer chain, respectively) were synthesised and packed in house to determine the impact that the spacer chain length has on the retention process. Two trends in the aromatic selectivity, q_aromatic, were observed, depending on whether the number of carbon atoms in the spacer chain is even or odd. Linear log k′ vs ϕ plots were obtained for each stationary phase and the S coefficient was determined from the gradient of these plots. For the phenyl type phases, the S vs n_c plots of the retention factors of linear polycyclic aromatic hydrocarbons vs the number of rings exhibit a distinct discontinuity that between 3 and 4 rings, which increases with increasing spacer chain length for even phases but decreases for odd phases. Accordingly, we suggest that the retention factors depend differently on the number of carbon atoms in the spacer chain depending on whether this number is even or odd and that this effect is caused by different orientations of the aromatic ring relative to the silica surface.

Bond length dependence on quantum states as shown by spectroscopy

Undergraduate students often have the misconception that molecules have fixed, unchanging bond lengths. This article discusses how linear-molecule rotational band spacings in infrared spectroscopy can be used as a qualitative, visual demonstration of the elongation of average bond lengths on vibrational excitation. The method does not depend on a detailed mathematical analysis of the spectra. In UV–vis spectroscopy, the rotational band spacings give rise to distinctive linear-molecule rotational contours, which easily show whether the average bond length has increased or decreased. The method is based on a spreadsheet simulation of the vibration–rotation or rovibronic (electronic–vibration–rotation) spectrum and is applied to hydrogen chloride IR, iodine UV–vis, and nitrogen UV–vis spectra in this article.

Lipid and fatty acid digestibility of three oil types in the Australian shortfin eel, Anguilla australis

The lipid and fatty acid digestibilities of three semi-purified, isonitrogenous (48.9–50.8% protein) and isocalorific (19.1–20.8 kJ g⁻¹) diets, in which the lipid source was either cod liver oil (CLO), linseed oil (LO) or sunflower oil (SFO), were estimated in the Australian shortfin eel (Anguilla australis) using chromic oxide as an external marker. Apparent percent protein and energy digestibilities of the diets were not significantly (P>0.05) affected by the lipid source, but the lipid digestibility was. The percent apparent lipid digestibility was lowest in the LO diet (90.2±0.6) and highest in the CLO diet (95.6±0.2).

Not all the fatty acids present in any one diet were recovered in the faecal samples. In diets with CLO, only three saturates (out of five), five monoenes and six (out of 11) PUFAs were detected in faecal samples. With all the diets, 20:0 and 22:0, and none of the n−6 HUFA were detected in the faecal samples. The digestibility of all the fatty acids, except 18:3n−3, was lowest in the diet with LO, and significantly so (P>0.05) from the other diets.

In shortfin eel, there was a trend for the digestibility of saturated fatty acids of diets with the animal oil as the lipid source to decrease with increasing chain length, and in diets with vegetable oil to increase initially and then decrease. A somewhat comparable trend was also evident in respect of monoenes.

When the digestibility of different categories of fatty acids is considered, the digestibility of saturates, monoenes, unsaturates, n−6, PUFA, HUFA and total fatty acid digestibilities of LO diet were the lowest, and differed significantly (P<0.05) from those of the CLO and SFO diets, except in the case of n−3 fatty acids.

Synthesis and structure of new oligomethylene-bridged double ladders. How far can the layers be separated?

The synthesis of the α,ω-bis[dichloro(trimethylsilylmethyl)stannyl]alkanes, (Me₃SiCH₂)C1₂Sn(CH₂)_nSnCl₂(CH₂SiMe₃) (13, n=5; 14, n=6; 15, n=7; 16, n=8; 17, n=10; 18, n=12) and the corresponding oligomethylene-bridged diorganotin oxides [(Me₃SiCH₂)(O)Sn(CH₂)_nSn(O)(CH₂SiMe₃)]_m (19, n=5; 20, n=6; 21, n=7; 22, n=8; 23, n=10; 24; n=12) is reported. The reaction of the diorganodichlorostannanes 13–18 with the corresponding diorganotin oxides 19–24 provided the spacer-bridged tetraorganodistannoxanes {[(Me₃SiCH₂)ClSn(CH₂)_nSnCl(CH₂SiMe₃)]O}₄ (25, n=5; 26, n=6; 27, n=7; 28, n=8; 29, n=10; 30, n=12). Compounds 13–30 have been identified by elemental analyses and multinuclear NMR spectroscopy. Compounds 25, 27, 29 and 30 have also been characterised by single crystal X-ray diffraction analysis and electrospray mass spectrometry. For the latter the essential double ladder motif is maintained for all n in the solid state, but subtle changes in alignment of the ladder planes occur. Separation between the two layers of the double ladder ranges from approx. 8.7  Å (for 25, n=5) to approx. 15 Å (for 30, n=12). In solution there is some dissociation of the double ladders into the corresponding dimers. The degree of dissociation is favoured by increasing oligomethylene chain length n.

Effects of fish oil substitution with a mix blend vegetable oil on nutrient digestibility in Murray cod, Maccullochella peelii peelii

The replacement of fish oil with vegetable based oils is a strategy which is increasingly being adopted by the aquafeed industry as an essential component to reduce the reliance on a limited supply of a natural resource, which in turn also provides cost benefits. The aim of the present investigation was to evaluate the lipid and fatty acid digestibility of a mix blend vegetable oil in juvenile Murray cod; an emerging species of increasing interest in the Australian aquaculture sector. Five semi purified experimental diets were formulated with 17% lipid originating from fish oil (FO) which was substituted in 25% increments by blended vegetable oil (VO), formulated using olive oil (12%), palm oil (43%) and linseed oil (45%) to match the major fatty acid classes of the FO.

Significant differences between the dietary treatments with regard to the lipid and individual fatty acid digestibility were recorded. This study clearly demonstrated that in Murray cod fatty acid digestibility decreases with chain length, and inversely increases relative to the degree of unsaturation. The combination of chain length, degree of unsaturation and the melting point of individual fatty acids resulted in the digestibility of PUFA > MUFA > SFA and short chain > longer chain fatty acids. Therefore, the inclusion of a mixed blend vegetable oil resulted in significantly reduced lipid digestibility in juvenile Murray cod.

An artificial neural network-based hairiness prediction model for worsted wool yarns

This study evaluated the performance of multilayer perceptron (MLP) and multivariate linear regression (MLR) models for predicting the hairiness of worsted-spun wool yarns from various top, yarn and processing parameters. The results indicated that the MLP model predicted yarn hairiness more accurately than the MLR model, and should have wide mill specific applications. On the basis of sensitivity analysis, the factors that affected yarn hairiness significantly included yarn twist, ring size, average fiber length (hauteur), fiber diameter and yarn count, with twist having the greatest impact on yarn hairiness.

Organotin-oxo clusters

This thesis reports on the development and expansion of reliable synthetic di-and multi-tin precursors for the assembly of oligomeric organotin-oxo compounds in which the shape, dimension and tin nuclearity can be controlled. The reaction of polymeric diorganotin oxides, (R2SnO)m (R = Me, Et, n-Bu, n-Oct, c-Hex, i-Pr, Ph), with saturated aqueous NH4X solutions (X = F, Cl, Br, I, OAc) in refluxing 1,4-dioxane afforded in high yields dimeric tetraorganodistannoxanes, [R2(X)SnOSn(X)R2]2, and in a few cases diorganotin dihalides or diacetates, R2SnX2. This method appears to be particularly good for the synthesis of halogenated tetraorganodistannoxanes but a less suitable method for the preparation of dicarboxylato tetraorganodistannoxanes. Identification of [R2(OH)SnOSn(X)R2]2 (R = n-Bu; X = Cl, Br) and [R2(OH)SnOSn(X)R2][R2(X)SnOSn(X)R2] suggest a serial substitution mechanism starting from [R2(OH)SnOSn(OH)R2]2. A series of α, ω -bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n (n = 3-8, 10, 12) and some of their derivatives were synthesised and characterised. These α, ω-bis(triphenylstannyl)alkanes, [Ph3Sn]2(CH2)n were converted to the corresponding halides [R(Cl)2Sn]2(CH2)n (R = CH2SiMe3) and subsequently to the polymeric oxides {[R(0)Sn]2(CH2)n}m. Reaction of {[R(O)Sn]2(CH2)n}m with [R(Cl)2Sn]2(CH2)n. (n = 3, n' = 4 and n = 4, n' = 3) in toluene at 100°C results in a mixture of symmetric and asymmetric double ladders, where different spacer chain lengths (n and n') provide the source of asymmetry. The coexistence at high temperature of separate 119Sn NMR signals belonging to symmetric and asymmetric double ladders suggests an equilibrium that is slow on the 119Sn NMR time scale and the position of which is temperature dependent. However, 119Sn NMR spectroscopic experiments of {[R(0)Sn]2(CH2)3}m with [R(Cl)2Sn]2(CH2)n for longer spacers (n - 5, 6, 8, 10, 12) reveal that molecular self-assembly of symmetric spacer-bridged di-tin precursors of equal chain length is preferred over asymmetric species. An ether-bridged di-tin tetrachloride [R(Cl)2Sn(CH2)3]2O (R = CH2SiMe3) and its corresponding polymeric oxide {[R(O)Sn(CH2)3]2O}m were synthesised and characterised. Reaction of [R(Cl)2Sn(CH2)3]2O with {[R(O)Sn(CH2)3]2O}m results in a unique functionalised double ladder {{[RSn(Cl)](CH2)3O(CH2)3[RSn(Cl)]}O}4 whose structure in the solid state was determined by X-ray analysis. Identification of tetrameric functionalised double ladder as well as dimeric and monomeric species suggest the existence of an equilibrium in solution. The feasibility of the functionalised double ladder to form host-guest complexes with a variety of metal cations is investigated using electrospray mass spectrometry (ESMS). Evidence for such complexes is found only for sodium cations. The reaction between {[R(O)Sn]2(CH2)n}m (n = 3, 4, 8, 10) and triflic acid is described. The initial formed products [RSn(CH2)nSnR](OTf)4 are easily hydrolysed. For n = 3, self-assembly leads to a discrete double ladder type structure, {{[RSn(OH)](CH2)3[RSn(H2O)]}O}44OTf, which is the first example of a cationic double ladder. For n ≥ 3, hydrolysis gives polymeric products, as demonstrated by the crystal structure of {[(H2O)(OH)RSn]2(CH2)4-2OTf2H2O}m. Two spacer-bridged terra-tin octachlorides [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)n (R = CH2SiMes; n = 1, 8) and their corresponding polymeric oxides {[R(O)Sn(CH2)3Sn(O)]2(CH2)n}m were successfully synthesised and characterised. Attempts were made to synthesise quadruple ladders from these precursors. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2CH2 with {[R(O)Sn(CH2)3Sn(O)]2CH2}m or (Y-Bu2SnO)3 result in, mostly insoluble, amorphous solids. Reactions of [R(Cl)2Sn(CH2)3Sn(Cl)2]2(CH2)8 with {[R(O)Sn(CH2)3Sn(O)]2(CH2)8}m or (t-Bu2SnO)s result in new tin-containing species which are presumably oligomeric. The synthesis of a series of alkyl-bridged di-tin hexacarboxylates [(RCO2)3Sn]2(CH2)n (n = 3, 4; R = Ph, c-C6H11, CH3, C1CH2) is also reported. The hydrolysis of these compounds is facile and complex. There appears to be no correlation between spacer chain length and hydrolysis product. However, the conjugate acid strength of the carboxylate does appear to be important. In general only insoluble amorphous polymeric organotin-oxo compounds were obtained.

Ion and solvent dynamics in gel electrolytes based on ethylene oxide grafted acrylate polymers

Multinuclear pulsed field gradient NMR measurements and rheological viscosity measurements were performed on three series of polymer gel electrolytes. The gels were based on a lithium salt electrolyte swollen into a copolymer matrix comprising an acrylate backbone and ethylene oxide side chains. In each series the side chains differed in length and number, but the acrylate-to-ethylene oxide ratio was kept constant. It was found that the self-diffusion coefficient of the cations was much lower than that of the anions, and that it decreased rapidly when the side chains got longer. In contrast, the self-diffusion coefficient of the anions was found to be independent of chain length. In the gel electrolytes, the diffusion coefficients of the solvent molecules are relatively constant despite an increased viscosity with increasing length of the side chains. However, in salt-free gels made for comparison, the diffusion coefficients of the solvent molecules decreased with increasing length of the side chains, which is consistent with an increased viscosity.

A new Lewis-base ionic liquid comprising a mono-charged diamine structure : a highly stable electrolyte for lithium electrochemistry

A new Lewis-base ionic liquid (IL) based on mono-charged 1,4-diazabicyclo[2.2.2]octane (dabco) was synthesized and its thermal and electrochemical behaviour was characterized. The dabco-based IL with bis(trifluoromethanesulfonyl)amide (TFSA) anion melts at 76 °C when the N-substituted alkyl chain length is 2. The dabco-based IL showed a wide electrochemical window of over 4 V ranging from −3.5 to +1.5 V vs. Fc/Fc⁺ and was able to deposit and strip lithium from a nickel substrate at reasonable efficiency.

Super water repellent fabrics produced by silica nanoparticle-containing coating

In this paper, we report on superhydrophobic fabrics (polyester, wool and cotton) produced by a wet-chemical coating technique. The coating solutions were synthesized by the co-hydrolysis of two silane precursors, tetraethyl orthosilicate (TEOS) and an alkylsilane, in an alkaline condition. Without any purification, the as-hydrolyzed solutions were directly used to treat fabrics, and the treated fabrics had water contact angles (CA) as high as 170º and sliding angles (SA) as low as 5º. Three alkylsilanes have been used for the synthesis of the coating solutions, and all contain three hydrolysable alkoxyl groups and one non-hydrolysable alkyl, but with different chain lengths (C1, C8 and C16). It was found that the CA value increased with an increase in the alkyl chain length, while the SA showed a reverse trend. When the functional group had a C16 alkyl, the treated fabric surfaces were highly superhydrophobic, with the CA not being affected much by the fabric type, while the SA values were slightly affected by the original wettability of the fabric substrates. The superhydrophobic feature was attributed to a highly rough surface formed by the particulate coating. Aside from the superhydrophobicity, the influence of the coating on the fabric softness was also examined.

Synthesis and characterization of soluble conducting polymers

Although conducting polymers have various potential applications, lack of solubility is an impediment in their direct application to material surfaces. Synthesis of alkyl pyrrole monomers and subsequent polymerization into soluble conducting polymers are aimed as alternatives to conventional methods of application of conducting polymers on substrates. Alkyl chains are attached to a pyrrole ring to produce solubility in the resulting conducting polypyrroles, which allow direct application of conductive polymer emulsions to any desired surface. Friedel-Crafts acylation of the tosyl-protected pyrrole provides high yields of the 3-acylated product. The conductivity values of poly-3- and 3, 4-substituted pyrroles are generally less than the unmodified polypyrrole. Increasingly bulkier groups attached to the pyrrole means lower conductivity of the resultant polymer. As the carbon chain length attached to the 3-position of pyrrole increases, the solubility also increases. However, the magnitude of change in conductivity of films and pellets of soluble conducting polypyrroles over the alkyl range is not significant.

Effects of additives on the cloud points of selected nonionic linear ethoxylated alcohol surfactants

Effects of various additives including inorganic salts, nonionic and ionic surfactants, water-soluble polymers and alcohols on the cloud points of three linear nonionic surfactants, Tergitol 15-S-7, Tergitol 15-S-9 and Neodol 25-7, were investigated. These surfactants are readily biodegradable and either linear primary or secondary ethoxylated alcohols. Cloud points of these surfactants were functions of their concentrations and concentrations of additives. The cloud points of nonionic surfactant mixtures lay in between the cloud points of individual component surfactants. Presence of two ionic surfactants, sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB), increased the cloud point of 1 wt% Tergitol 15-S-7 micellar solution dramatically when concentrations of ionic surfactants approaching their critical micelle concentration. Addition of water-soluble polymers decreased the cloud point, while addition of inorganic salts can either increase or decrease the cloud points. However, the effect of an alcohol additive on cloud point was dependent on its chain length or its water solubility. Interestingly, synergistic effects between sulfate or phosphate and pentanol on depression of cloud points of Tergitol 15-S-9 were discovered. A linear model predicting cloud points of Tergitol 15-S-X (X = 7, 9 and 12) surfactants and Neodol 25-X (X = 7, 9 and 12) surfactants were proposed with a correlation to logarithm of their ethylene oxide numbers.

Ratio-dependent response of a temperate Australian estuarine system to sustained nitrogen loading

Classical resource- and the less studied ratio-dependent models of predator–prey relationships provide divergent predictions as to the sustained ecological effects of bottom-up forcing. While resource-dependent models, which consider only instantaneous prey density in modelling predator responses, predict community responses that are dependent on the number of trophic levels in a system, ratio-dependent models, which consider the number of prey per consumer, predict proportional increase in each level irrespective of chain length. The two models are only subtly different for systems with two or three trophic levels but in the case of four trophic levels, predict opposite effects of enrichment on primary producers. Despite the poor discriminatory power of tests of the models in systems with two or three trophic levels, field tests in estuarine and marine systems with four trophic levels have been notably absent. Sampling of phytoplankton, macroinvertebrates, invertebrate-feeding fishes, piscivorous fishes in Kooloonbung Creek, Hastings River estuary, eastern Australia, subject to over 20 years of sewage discharge, revealed increased abundances in all four trophic levels at the disturbed location relative to control sites. Increased abundance of phytoplankton at the disturbed site was counter to the predictions of resource-dependent models, which posit a reduction in the first trophic level in response to enrichment. By contrast, the increase in abundance of this first trophic level and the proportionality of increases in abundances of each of the four trophic groups to nitrogen loading provided strong support for ratio dependency. This first evidence of ratio dependence in an estuarine system with four trophic levels not only demonstrates the applicability of ecological theory which seeks to simplify the complexity of systems, but has implications for management. Although large nutrient inputs frequently induce mortality of invertebrates and fish, we have shown that smaller inputs may in fact enhance biomass of all trophic levels.