Taking environmental water requirements and climate change into account in the designation and management of protected areas for floodplain ecosystems

In 2005, the Victorian government asked the Victorian Environmental Assessment Council (VEAC) to 1) identify and evaluate the extent, condition, values, management, resources and uses of riverine red gum forests and associated fauna, wetlands, floodplain ecosystems and vegetation communities in northern Victoria; and 2) make recommendations relating to the conservation, protection and ecological sustainable use of public land. The design of a comprehensive, adequate and representative (CAR) reserve system was a key part of the recommendations made by VEAC. In order to assist in the decision-making for environmental water allocation for protected areas and other public land, a process for identifying flood-dependent natural values on the Victorian floodplains of the River Murray and its tributaries was developed.

Although some areas such as the Barmah forest are very well known, there have been few comprehensive inventories of important natural values along the Murray floodplains. For this project, VEAC sought out and compiled data on flood requirements (natural flood frequency, critical interval between floods, minimum duration of floods) for all flood-dependent ecological vegetation classes (EVCs) and threatened species along the Goulburn, Ovens, King and Murray Rivers in Victoria. The project did not include the Kerang Lakes and floodplains of the Avoca, Loddon and Campaspe Rivers. 186 threatened species and 110 EVCs (covering 224,247 ha) were identified as flood-dependent and therefore at risk from insufficient flooding.

Past environmental water allocations have targeted a variety of different natural assets (e.g. stressed red gum trees, colonial nesting waterbirds, various fish species), but consideration of the water requirements of the full suite of floodplain ecosystems and significant species has been limited. By considering the water requirements of the full range of natural assets, the effectiveness of water delivery for biodiversity can be maximised. This approach highlights the species and ecosystems most in need of water and builds on the icon sites approach to view the Murray floodplains as an interconnected system. This project also identified for the first time the flood-frequency and duration requirements for the full suite of floodplain ecosystems and significant species.

This project is the most comprehensive identification of water requirements for natural values on the floodplain to date, and is able to be used immediately to guide prioritisation of environmental watering. As more information on floodplain EVCs and species becomes available, the water requirements and distribution of values can be refined by ecologists and land and water managers. That is, the project is intended as the start of an adaptive process allowing for the incorporation of monitoring and feedback over time. The project makes it possible to transparently and easily communicate the extent to which manipulated or natural flows benefit various natural values. Quantitative and visual outputs such as maps will enable environmental managers and the public to easily see which values do and do not receive water (see http://www.veac.vic.gov.au/riverredgumfinal.htm for further details).

Role assessment of GIS analysis and its reliability while ranking urban sustainability using scenarios specific to regional climate, community and culture

Urban Sustainability expresses the level of conservation of a city while living a town or consuming its urban resources, but the measurement of urban sustainability depends on what are considered important indicators of conservation besides the permitted levels of consumption in accordance with adopted criteria. This criterion should have common factors that are shared for all the members tested or cities to be evaluated as in this particular case for Abu Dhabi, but also have specific factors that are related to the geographic place, community and culture, that is the measures of urban sustainability specific to a middle east climate, community and culture where GIS Vector and Raster analysis have a role or add a value in urban sustainability measurements or grading are considered herein. Scenarios were tested using various GIS data types to replicate urban history (ten years period), current status and expected future of Abu Dhabi City setting factors to climate, community needs and culture. The useful Vector or Raster GIS data sets that are related to every scenario where selected and analysed in the sense of how and how much it can benefit the urban sustainability ranking in quantity and quality tests, this besides assessing the suitable data nature, type and format, the important topology rules to be considered, the useful attributes to be added, the relationships which should be maintained between data types of a geo- database, and specify its usage in a specific scenario test, then setting weights to each and every data type representing some elements of a phenomenon related to urban suitability factor. The results of assessing the role of GIS analysis provided data collection specifications such as the measures of accuracy reliable to a certain type of GIS functional analysis used in an urban sustainability ranking scenario tests. This paper reflects the prior results of the research that is conducted to test the multidiscipline evaluation of urban sustainability using different indicator metrics, that implement vector GIS Analysis and Raster GIS analysis as basic tools to assist the evaluation and increase of its reliability besides assessing and decomposing it, after which a hypothetical implementation of the chosen evaluation model represented by various scenarios was implemented on the planned urban sustainability factors for a certain period of time to appraise the expected future grade of urban sustainability and come out with advises associated with scenarios for assuring gap filling and relative high urban future sustainability. The results this paper is reflecting are concentrating on the elements of vector and raster GIS analysis that assists the proper urban sustainability grading within the chosen model, the reliability of spatial data collected; analysis selected and resulted spatial information. Starting from selecting some important indicators to comprise the model which include regional culture, climate and community needs an example of what was used is Energy Demand & Consumption (Cooling systems). Thus, this factor is related to the climate and it‟s regional specific as the temperature varies around 30-45 degrees centigrade in city areas, GIS 3D Polygons of building data used to analyse the volume of buildings, attributes „building heights‟, estimate the number of floors from the equation, following energy demand was calculated and consumption for the unit volume, and compared it in scenario with possible sustainable energy supply or using different environmental friendly cooling systems this is followed by calculating the cooling system effects on an area unit selected to be 1 sq. km, combined with the level of greenery area, and open space, as represented by parks polygons, trees polygons, empty areas, pedestrian polygons and road surface area polygons. (initial measures showed that cooling system consumption can be reduced by around 15 -20 % with a well-planned building distributions, proper spaces and with using environmental friendly products and building material, temperature levels were also combined in the scenario extracted from satellite images as interpreted from thermal bands 3 times during the period of assessment. Other examples of the assessment of GIS analysis to urban sustainability took place included Waste Productivity, some effects of greenhouse gases measured by the intensity of road polygons and closeness to dwelling areas, industry areas as defined from land use land cover thematic maps produced from classified satellite images then vectors were created to take part in defining their role within the scenarios. City Noise and light intensity assessment was also investigated, as the region experiences rapid development and noise is magnified due to construction activities, closeness of the airports, and highways. The assessment investigated the measures taken by urban planners to reduce degradation or properly manage it. Finally as a conclusion tables were presented to reflect the scenario results in combination with GIS data types, analysis types, and the level of GIS data reliability to measure the sustainability level of a city related to cultural and regional demands.

TMI for urban resilience : measuring and mapping long-term climate change effects on soil moisture

The effect of climate change on the shallow expansive foundation conditions of resident dwellings is costing several hundred billion dollars worldwide. The design and costs of constructing or repairing residential footings is greatly influenced by the degree of ground movement, which is driven by the magnitude of change in soil moisture. The impacts of climate change on urban infrastructure are expected to include accelerated degradation of materials and foundations of buildings and facilities, increased ground movement, changes in ground water affecting the chemical structure of foundations, and fatigue of structures from extreme storm events. Previous research found that residential houses that were built less than five years ago have suffered major cracks and other damage caused by slab movement after record rainfall. The Thornthwaite Moisture Index (TMI) categorises climate on the basis of rainfall, temperature, potential evapotranspiration and the water holding capacity of the soil. Originally TMI was mainly used to map soil moisture conditions for agriculture but soon became a method to predict pavement and foundation changes. Few researchers have developed TMI maps for Australia, but generally, their accuracy is low or unknown, and their use is limited. The aims of this paper are: (1) To produce accurate maps of TMI for the state of Victoria for 100 years (1913 to 2012) in 20 year periods using long-term historical climatic data and advanced spatial statistics methods in GIS, and (2) Analyse the spatial and temporal changes of TMI in Victoria. Preliminary results suggest that a better understanding of climate change through long-term TMI mapping can assist urban planning and guide construction regulations towards the development of cities which are more resilient.

Mapping 100 years of Thornthwaite moisture index: Impact of climate change in Victoria, Australia

Geographer C. W. Thornthwaite proposed in 1948 a moisture index called Thornthwaite Moisture Index (TMI) as part of a water balance model for a new classification system for climate. The importance of TMI climatic classification has been recognised in many areas of knowledge and practice worldwide over the last 60 years. However, although past climate research was focused on developing adequate methods for climate classification, current research is more concerned with understanding the patterns of climate change. The use of TMI as an indicator for climate change is still an incipient area of research. The contributions of this paper are twofold. First, it is to fully document a methodology based on geostatistics adopted to produce a time series of TMI maps that are accurate and have high spatial resolution. The state of Victoria, in Australia, over the last century, is used as the case study. Second, by analysing these maps, the paper presents a general evaluation of the spatial patterns found in Victoria related to moisture variability across space and over time. Some potential implications of the verified moisture changes are discussed, and a number of ideas for further development are suggested. © 2014 Institute of Australian Geographers.