Education to gain sustainability : analysis and approach from the experience obtained from two high school systems in mexican rural communities

The decade “Education for Sustainability” is just emerging and one of its goals emphasized the importance of considering the currícula in a transdisciplinary and community based programs. This includes recognizing local and regional interests as relevant topics into the currícula. “Education for sustainability” does not appear to have a strong basis on their actions as its theoretical discourse does. The study we present here about content analysis in the curricula of two high schools systems in rural Mexican communities is an example. In this research we analyzed: 1) how the curricula is oriented towards forest management and the way is connected to the social reality of the communities; 2) how does the learning process develops in the classroom and its dynamics with teachers and students and 3) how does the environmental learning take place. Results revealed that more research is needed with adolescents in order to change the educational structure in rural Mexican high schools.

Profiling of polar metabolites in biological extracts using diamond hydride-based aqueous normal phase chromatography

Highly polar metabolites, such as sugars and most amino acids are not retained by conventional RP LC columns. Without sufficient retention low concentration compounds are not detected due ion suppression and structural isomers are not resolved. In contrast, hydrophilic interaction chromatography (HILIC) and aqueous normal phase chromatography (ANP) retain compounds based on their hydrophilicity and therefore provides a means of separating highly polar compounds. Here, an ANP method based on the diamond hydride stationary phase is presented for profiling biological small molecules by LC. A rapid separation system based upon a fast gradient that delivers reproducible chromatography is presented. Approximately 1000 compounds were reproducibly detected in human urine samples and clear differences between these samples were identified. This chromatography was also applied to xylem fluid from soyabean (Glycine max) plants to which 400 compounds were detected. This method greatly increases the metabolite coverage over RP-only metabolite profiling in biological samples. We show that both forms of chromatography are necessary for untargeted comprehensive metabolite profiling and that the diamond hydride stationary phase provides a good option for polar metabolite analysis.

Distribution of carbon nanotubes in fresh ordinary Portland cement pastes: understanding from a two-phase perspective

Significant research advances have been made in the field of carbon nanotube (CNT) reinforced ordinary Portland cement (OPC) paste composites in recent years. However, the distribution of CNTs in fresh OPC paste is yet to be fully researched and quantified, thereby creating a technical barrier to CNT utilization in concrete construction. In this study, fresh OPC paste was treated as a two-phase material containing solid particles (cement grains) and liquid solutions (pore solutions). A centrifugation-based technique was proposed to separate these two phases and the presence of CNTs in each phase was quantified. UV-Vis spectrometry showed that the degree of dispersion can achieve above 90 wt% using polycarboxylate superplasticizer. The results suggested an upper limit of 0.26 wt% for CNT addition into water before mixing with OPC, and the dispersion was found to be stable for at least 4 hours. Based on scanning electron imaging, the adsorption phenomenon of CNTs on OPC grains with size less than 4 μm was discovered. Energy-dispersive X-ray spectroscopy indicated these adsorptive particles have lower Ca to Si ratio. It was observed that about 0.5 mg of CNTs per gram of OPC grains was adsorbed in solid OPC grains in typical fresh OPC pastes. On the basis of these results, a conceptual model was proposed for the distribution of CNTs in fresh OPC paste where about 33 wt% of the CNTs stay in pore solution and 65 wt% of CNTs are adsorbed on OPC grains.

Stability of two-dimensional Roesser systems with time-varying delays via novel 2D finitesum inequalities

This study considers the problem of stability analysis of discrete-time two-dimensional (2D) Roesser systems with interval time-varying delays. New 2D finite-sum inequalities, which provide a tighter lower bound than the existing ones based on 2D Jensen-type inequalities, are first developed. Based on an improved Lyapunov-Krasovskii functional, the newly derived inequalities are then utilised to establish delay-range-dependent linear matrix inequality-based stability conditions for a class of discrete time-delay 2D systems. The effectiveness of the obtained results is demonstrated by numerical examples.

Acid–organic base swollen polymer membranes

In this work, two different polymer membrane systems based on Nafion and Teflon were investigated as proton conductors for polymer membrane fuel cells. Water-free Nafion117 membranes swollen with different non-aqueous solvents were prepared. The solvents included imidazole, imidazole–imidazolium salt solutions, room temperature molten salts and molten salt–acid solutions. Teflon films were treated with a surfactant, or a Nafion solution, to improve their surface properties, and were subsequently swollen with phosphoric acid. Conductivity measurements were carried out on both the Nafion and Teflon membranes. Conductivities in the range of 10⁻³ S cm⁻¹ at around 100°C were obtained. This is still an order of magnitude lower than the corresponding water swollen Nafion at 80°C.

The cost of recovery protocols in web-based database systems

The cost of recovery protocols is important with respect to system performance during normal operation and failure in terms of overhead, and time taken to recover failed transactions. The cost of recovery protocols for web database systems has not been addressed much. In this paper, we present a quantitative study of cost of recovery protocols. For this purpose, we use an experiment setup to evaluate the performance of two recovery algorithms, namely the, two-phase commit algorithm and log-based algorithm. Our work is a step towards building reliable protocols for web database systems.

Extraction of silver(i) from aqueous solutions in the absence and presence of copper(ii) with a methimazole-based ionic liquid

The ionic liquid (IL) 2-butylthiolonium bis(trifluoromethanesulfonyl)amide, [mimSBu][NTf₂], facilitates the efficient extraction of silver(i) from aqueous media via interaction with both the cation and anion components of the IL. Studies with a conventional aqueous-IL two phase system as well as microextraction of silver(i) by a thick IL film adhered to an electrode monitored in situ by cyclic voltammetry, established that [mimSBu][NTf₂] can extract electroactive silver(i) ions from an aqueous solution. The pH of the aqueous phase decreases upon addition of [mimSBu]⁺, which is attributed to partial release of the hydrogen attached to the N(3) nitrogen atom of the imidazolium ring. The presence of silver(i) further increase the acidity of the aqueous phase as a consequence of coordination with the IL cation component. Voltammetric and ¹H and ¹³C NMR techniques have been used to establish the nature of the silver(i) complexes extracted, and show that the form of interaction with the IL differs from that outlined previously for the extraction of copper(ii). Insights on the competition established when silver(i) is extracted in the presence of copper(ii) are provided. Finally, it is noted that metallic silver can be directly electrodeposited at the electrode surface after extraction of silver(i) into [mimSBu][NTf₂] and that back extraction of silver(i) into aqueous media is achieved by addition of an acidic aqueous solution.

Superimposed channel training for two-way MIMO relay systems

Two-way relaying systems are known to be capable of providing higher spectral efficiency compared with one-way relaying systems. However, the channel estimation problem for two-way relaying systems becomes more complicated. In this paper, we propose a superimposed channel training scheme for two-way MIMO relay communication systems, where the individual channel information for users-relay and relay-users links are estimated. The optimal structure of the source and relay training sequences are derived when the mean-squared error (MSE) of channel estimation is minimized. We also optimize the power allocation between the source and relay training sequences to improve the performance of the algorithm. Numerical examples are shown to demonstrate the performance of the proposed channel training algorithm.

Does dynamic vulcanization induce phase separation?

Immiscible and miscible blends of poly(vinylidene fluoride) (PVDF) and acrylic rubber (ACM) were subjected to dynamic vulcanization to investigate the effect of crosslinking on phase separation. As a result of different processability, mixing torque behavior of miscible and immiscible blends was significantly different from one another. Scanning electron microscopy (SEM) was used to investigate the morphology of the system. After dynamic vulcanization, submicron ACM droplets were observed in the samples near the binodal curve of the system under mixing conditions. Small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) analysis were used to investigate the effect of dynamic vulcanization on the lamellar structure of the system. It was shown that for samples near the boundary of phase separation, increasing the crosslink density led to a decrease in the lamellar long period (L) as a sign of increment of crosslink density induced phase decomposition. Effects of shear rate on the final morphology of the system were investigated by changing the mixing temperature and by comparing the results of dynamic vulcanization at one phase and two phase regions.

Phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs)

Herein, we report the phase inversion of ionomer-stabilized emulsions to form high internal phase emulsions (HIPEs) induced by salt concentration and pH changes. The ionomers are sulfonated polystyrenes (SPSs) with different sulfonation degrees. The emulsion types were determined by conductivity measurements, confocal microscopy and optical microscopy, and the formation of HIPE organogels was verified by the tube-inversion method and rheological measurements. SPSs with high sulfonation degrees (water-soluble) and low sulfonation degrees (water-insoluble) can stabilize oil-in-water emulsions; these emulsions were transformed into water-in-oil HIPEs by varying salt concentrations and/or changing the pH. SPS, with a sulfonation degree of 11.6%, is the most efficient, and as low as 0.2 (w/v)% of the organic phase is enough to stabilize the HIPEs. Phase inversion of the oil-in-water emulsions occurred to form water-in-oil HIPEs by increasing the salt concentration in the aqueous phase. Two phase inversion points from oil-in-water emulsions to water-in-oil HIPEs were observed at pH 1 and 13. Moreover, synergetic effects between the salt concentration and pH changes occurred upon the inversion of the emulsion type. The organic phase can be a variety of organic solvents, including toluene, xylene, chloroform, dichloroethane, dichloromethane and anisole, as well as monomers such as styrene, butyl acrylate, methyl methacrylate and ethylene glycol dimethacrylate. Poly(HIPEs) were successfully prepared by the polymerization of monomers as the continuous phase in the ionomer-stabilized HIPEs.

Personality and responses to appetitive and aversive stimuli: the joint influence of behavioural approach and behavioural inhibition systems

Gray’s reinforcement sensitivity theory (RST) posits two separable neurological systems involved in the regulation of personality and behaviour. The behavioural approach and inhibition systems facilitate the expression of appetitive (impulsive-sensation seeking traits) and aversive motivation (anxiety traits), respectively. Inconsistent findings regarding associations between measures of personality and behavioural responses to appetitive and aversive stimuli has led to a modification of RST including the notion that, rather than separable as first hypothesised, the two systems jointly influence behaviour. The current study was designed to investigate this proposal with an additional focus on the role of reinforcement expectancies. Seventy-eight participants completed two questionnaire measures of BIS/BAS activity (EPQ-R, SPSRQ) and two behavioural measures (Q-TASK, Card Arranging Reward Responsivity Objective Task). Findings were in general consistent with the original separable systems approach, however they also showed that aversive responses were highest in high BAS/high BIS individuals, thus suggesting an interactive account of BIS/BAS processes. Further, stronger positive correlations between self-report BAS traits and behavioural reward responsiveness were found for participants who perceived the task as more rewarding than initially expected. Discussion focuses on the role of reward expectancies and on the issue regarding separable vs. joint BIS/BAS systems.

Development of a cooling fabric from conducting polymer coated fibres: proof of concept

It is supposed that there should be a thermal electric effect if a dc current is applied across two dissimilar conducting polymers, similar to so called “Peltier effect” in metals or semiconductors. However, this hypothesis has not been tested on conducting polymers and using these materials to make cooling fabrics has never been attempted before. Polypyrrole coated fabrics were used to test the hypothesis in this preliminary study. Seebeck and the Peltier effects were proven to exist. However, thermoelectricity effect between two conducting polymer coated fabric samples was only about 10 μV/°C. Cooling effect by conductive polymer powder was achieved but performance was unsteady due to electrical degradation of the conducting polymer. Nevertheless, the concept was demonstrated and the development of a cooling fabric is possible.

Cost-effectiveness analysis of a two-stage screening intervention for hepatocellular carcinoma in Taiwan

Background/Purpose

Hepatocellular carcinoma (HCC) has been the leading cause of cancer death in Taiwan since the 1980s. A two-stage screening intervention was introduced in 1996 and has been implemented in a limited number of hospitals. The present study assessed the costs and health outcomes associated with the introduction of screening intervention, from the perspective of the Taiwanese government. The cost-effectiveness analysis aimed to assist informed decision making by the health authority in Taiwan.
Methods

A two-phase economic model, 1-year decision analysis and a 60-year Markov simulation, was developed to conceptualize the screening intervention within current practice, and was compared with opportunistic screening alone. Incremental analyses were conducted to compare the incremental costs and outcomes associated with the introduction of the intervention. Sensitivity analyses were performed to investigate the uncertainties that surrounded the model.
Results

The Markov model simulation demonstrated an incremental cost-effectiveness ratio (ICER) of NT$498,000 (US$15,600) per life-year saved, with a 5% discount rate. An ICER of NT$402,000 (US$12,600) per quality-adjusted life-year was achieved by applying utility weights. Sensitivity analysis showed that excess mortality reduction of HCC by screening and HCC incidence rates were the most influential factors on the ICERs. Scenario analysis also indicated that expansion of the HCC screening intervention by focusing on regular monitoring of the high-risk individuals could achieve a more favorable result.
Conclusion

Screening the population of high-risk individuals for HCC with the two-stage screening intervention in Taiwan is considered potentially cost-effective compared with opportunistic screening in the target population of an HCC endemic area.