Algorithms and applications of preference based ranking for information retrieval

In this thesis, the author designed three sets of preference based ranking algorithms for information retrieval and provided the corresponsive applications for the algorithms. The main goal is to retrieve recommended, high similar and valuable ranking results to users.

Stretchable graphene-based materials of high conductivity

 The application of graphene based materials in the area of stretchable electronics has driven enormous attention, especially in terms of the design of stretchable structures. This thesis has finely tuned the synthesis process of reduced graphene oxide (rGO), focused on the introduction of a thermo-mechanical shrinking process to fabricate wrinkled rGO structure as stretchable conductors and finally presented another potential application of wrinkled rGO structure.

Development of high performance materials based on smart elastomer nanocomposites

 The present thesis explores the fabrication of technologically relevant nanocomposites out of a few elastomers and conducting fillers like carbon nanotubes, graphene and polyaniline. The developed materials have good applications in sensors, shape memory devices and capacitors. Different characterization methods reveal the influence of filler-elastomer interactions on the various properties of the obtained nanocomposites as well.

Potential applications of discrete-event simulation and fuzzy rule-based systems to structural reliability and availability

This chapter discusses and illustrates some potential applications of discrete-event simulation (DES) techniques in structural reliability and availability analysis, emphasizing the convenience of using probabilistic approaches in modern building and civil engineering practices. After reviewing existing literature on the topic, some advantages of probabilistic techniques over analytical ones are highlighted. Then, we introduce a general framework for performing structural reliability and availability analysis through DES. Our methodology proposes the use of statistical distributions and techniques – such as survival analysis – to model component-level reliability. Then, using failure- and repair-time distributions and information about the structural logical topology (which allows determination of the structural state from their components’ state), structural reliability, and availability information can be inferred. Two numerical examples illustrate some potential applications of the proposed methodology to achieving more reliable and structural designs. Finally, an alternative approach to model uncertainty at component level is also introduced as ongoing work. This new approach is based on the use of fuzzy rule-based systems and it allows the introduction of experts’ opinions and evaluations in our methodology.

Fabrication of meso-porous sintered metal thin films by selective etching of silica based sacrificial template

 Meso-porous metal materials have enhanced surface energies offering unique surface properties with potential applications in chemical catalysis, molecular sensing and selective separation. In this paper, commercial 20 nm diameter metal nano-particles, including silver and copper were blended with 7 nm silica nano-particles by shear mixing. The resulted powders were cold-sintered to form dense, hybrid thin films. The sacrificial silica template was then removed by selective etching in 12 wt% hydrofluoric acid solutions for 15 min to reveal a purely metallic meso-porous thin film material. The impact of the initial silica nano-particle diameter (7–20 nm) as well as the sintering pressure (5–20 ton·m−2) and etching conditions on the morphology and properties of the final nano-porous thin films were investigated by porometry, pyknometery, gas and liquid permeation and electron microscopy. Furthermore, the morphology of the pores and particle aggregation during shear mixing were assessed through cross-sectioning by focus ion beam milling. It is demonstrated that meso-pores ranging between 50 and 320 nm in average diameter and porosities up to 47% can be successfully formed for the range of materials tested.

Functionally graded porous scaffolds made of Ti-based agglomerates

Mono- and double-layer porous scaffolds were successfully fabricated using ball-milled agglomerates of Ti and Ti-10Nb-3Mo alloy. For selectively controlling the level of porosity and pore size, the agglomerates were sieved into two different size fractions of 100-300μm and 300-500μm. Compressive mechanical properties were measured on a series of cylindrical sintered compacts with different ratios of solid core diameter to porous layer width. The graded porous scaffolds exhibited stress-strain curves typical for metallic foams with a defined plateau region after yielding. The compressive strengths and elastic moduli ranged from 300 to 700MPa and 14 to 55GPa, respectively, depending on the core diameter and the material used. The obtained properties make these materials suitable for load-bearing implant applications.

Enhanced photocatalytic activities of TiO2-SiO2 nanohybrids immobilized on cement-based materials for dye degradation

Using cement-based material as a matrix for photocatalytic hybrids is an important development for the large-scale application of photocatalytic technologies. In this work, photocatalytic activity of nanosized hybrids of TiO2/SiO2 (nano-TiO2-SiO2) for degradation of some organic dyes on cementitious materials was highlighted. For this purpose, an optimal inorganic sol-gel precursor was firstly applied to prepare the composites of nano-TiO2-SiO2 which was characterized by XRD, SEM and UV-Vis. Then, a thin layer was successfully coated on white Portland cement (WPC) blocks using a dipping process in a nano-TiO2-SiO2 solution. The effect of nano-TiO2-SiO2-coated WPC blocks on photocatalytic decomposition of three dyes, including Malachite green oxalate (MG), Methylene blue (MB) and Methyl orange (MO) were studied under UV irradiation and monitored by chemical oxygen demand tests. The results showed an increase in photocatalytic effects which depends on the structure and pH of the applied cement.

Tracking and tracing applications of 3G for SMEs

With dynamic growth and acceptance of mobile devices, many innovative business applications are beginning to emerge. Tracking and tracing seems to be one of the popular applications which many organisations have initiated, often facilitated by location based services provided by mobile network operators. However, there are many issues associated with the provisioning of this application with current technologies and business models. Small and Medium-size Enterprises (SMEs) that make up a significant segment of businesses worldwide do not yet seem able to benefit widely from these services. In this chapter, we initially review current technologies/ applications and the issues associated with them, drawing from research and the experiences of a long term ongoing action research project with SMEs in the trade sector. Subsequently, we explore the opportunities offered by 3G services/business applications to SMEs, and provide a broad critical outlook on future opportunities for SMEs to benefit from 3G services.

Chalk and cheese: Grounded theory case studies of the introduction and usage of activity-based information in two British banks

During the conduct of a research project into influences on the use of management accounting information, the use of activity-based techniques and information in two British banks was studied by the application of grounded theory principles. Juxtaposition of these two case studies reveals insights about the managers' significantly different experiences of ongoing applications, and the different outcomes of implementation that may arise, despite commonality in the organization and industry environment. This paper presents these two case studies, highlights the similarities and differences between them, and draws some conclusions about the causes of the differences. Factors that can be managed to achieve a greater use of these particular management accounting techniques, and the information they generate, are revealed. In particular, the findings suggest that the introduction of transfer charging between the bank's internal units highlights the need for activity-based techniques, and that education, communication and implementor support are vital, both for implementation success and for the widespread continuing use of the resultant applications. Further, between the two cases the greatest consensus was found in a common concern about the amount of detail in the databank and reports.

Staff and student views of the usefulness of information technology materials within an integrated curriculum: are these educational resources effective in promoting student learning?

This paper reports on a study on the perceived effectiveness of educational resources within the context of a single course in a first-year biology program at the University of Sydney (Australia). The overall study examined the dynamic state of perceptions towards these resources by the major stakeholders involved with the course (students, teaching staff, and technical staff). A major focus of the research was the extent to which the students used the computer-based resources made available to them, and staff and students' perceptions of the usefulness of these resources in supporting their learning. Specifically, results are discussed related to student use of computers and the Internet, use of biology online materials in the virtual learning environment, use and perceptions of communication technologies, and use and perceptions of computer-based online resources. Data were collected from the students using surveys and focus groups and from staff using surveys and interviews within an action-research paradigm. While the majority of students found the resources to be of use in supporting learning, some did not find them useful, and some did not use them at all. In comparison, the staff had higher expectations of both usage and usefulness. The level of student use was not a function of access to computers or the Internet, so the findings suggest that the provision of online resources will not necessarily generate value-added learning.

Applications of electrospun nanofibers

Polymeric nanofiber non-woven materials produced by electrospinning have extremely high surface-to-mass (or volume) ratio and a porous structure with excellent pore-interconnectivity. These characteristics plus the functionalities and surface chemistry of the polymer itself impart the nanofibers with desirable properties for a range of advanced applications. This review summarizes the recent progress in electrospun nanofibers, with an emphasis on their applications.

Management of SPMD based parallel processing on clusters of workstations

Current attempts to manage parallel applications on Clusters of Workstations (COWs) have either generally followed the parallel execution environment approach or been extensions to existing network operating systems, both of which do not provide complete or satisfactory solutions. The efficient and transparent management of parallelism within the COW environment requires enhanced methods of process instantiation, mapping of parallel process to workstations, maintenance of process relationships, process communication facilities, and process coordination mechanisms. The aim of this research is to synthesise, design, develop and experimentally study a system capable of efficiently and transparently managing SPMD parallelism on a COW. This system should both improve the performance of SPMD based parallel programs and relieve the programmer from the involvement into parallelism management in order to allow them to concentrate on application programming. It is also the aim of this research to show that such a system, to achieve these objectives, is best achieved by adding new special services and exploiting the existing services of a client/server and microkernel based distributed operating system. To achieve these goals the research methods of the experimental computer science should be employed. In order to specify the scope of this project, this work investigated the issues related to parallel processing on COWs and surveyed a number of relevant systems including PVM, NOW and MOSIX. It was shown that although the MOSIX system provide a number of good services related to parallelism management, none of the system forms a complete solution. The problems identified with these systems include: instantiation services that are not suited to parallel processing; duplication of services between the parallelism management environment and the operating system; and poor levels of transparency. A high performance and transparent system capable of managing the execution of SPMD parallel applications was synthesised and the specific services of process instantiation, process mapping and process interaction detailed. The process instantiation service designed here provides the capability to instantiate parallel processes using either creation or duplication methods and also supports multiple and group based instantiation which is specifically design for SPMD parallel processing. The process mapping service provides the combination of process allocation and dynamic load balancing to ensure the load of a COW remains balanced not only at the time a parallel program is initialised but also during the execution of the program. The process interaction service guarantees to maintain transparently process relationships, communications and coordination services between parallel processes regardless of their location within the COW. The combination of these services provides an original architecture and organisation of a system that is capable of fully managing the execution of SPMD parallel applications on a COW. A logical design of a parallelism management system was developed derived from the synthesised system and was shown that it should ideally be based on a distributed operating system employing the client server model. The client/server based distributed operating system provides the level of transparency, modularity and flexibility necessary for a complete parallelism management system. The services identified in the synthesised system have been mapped to a set of server processes including: Process Instantiation Server providing advanced multiple and group based process creation and duplication; Process Mapping Server combining load collection, process allocation and dynamic load balancing services; and Process Interaction Server providing transparent interprocess communication and coordination. A Process Migration Server was also identified as vital to support both the instantiation and mapping servers. The RHODOS client/server and microkernel based distributed operating system was selected to carry out research into the detailed design and to be used for the implementation this parallelism management system. RHODOS was enhanced to provide the required servers and resulted in the development of the REX Manager, Global Scheduler and Process Migration Manager to provide the services of process instantiation, mapping and migration, respectively. The process interaction services were already provided within RHODOS and only required some extensions to the existing Process Manager and IPC Managers. Through a variety of experiments it was shown that when this system was used to support the execution of SPMD parallel applications the overall execution times were improved, especially when multiple and group based instantiation services are employed. The RHODOS PMS was also shown to greatly reduce the programming burden experienced by users when writing SPMD parallel applications by providing a small set of powerful primitives specially designed to support parallel processing. The system was also shown to be applicable and has been used in a variety of other research areas such as Distributed Shared Memory, Parallelising Compilers and assisting the port of PVM to the RHODOS system. The RHODOS Parallelism Management System (PMS) provides a unique and creative solution to the problem of transparently and efficiently controlling the execution of SPMD parallel applications on COWs. Combining advanced services such as multiple and group based process creation and duplication; combined process allocation and dynamic load balancing; and complete COW wide transparency produces a totally new system that addresses many of the problems not addressed in other systems.

Chemistry, spectroscopy and analytical applications of certain chemiluminescent reactions

Chemiluminescence, the production of light from a chemical reaction, has found widespread use in analytical chemistry. Both tris (2, 2’-bipyridyl) ruthenium (II) and acidic potassium permanganate are chemiluminescence reagents that have been employed for the determination of a diverse range of analytes. This thesis encompasses some fundamental investigations into the chemistry and spectroscopy of these chemiluminescence reactions as well as extending the scope of their analytical applications. Specifically, a simple and robust capillary electrophoresis chemiluminescence detection system for the determination of codeine, O6-methylcodeine and thebaine is described, based upon the reaction of these analytes with chemically generated tris(2,2'-bipyridyl)ruthenium(III) prepared in sulfuric acid (0.05 M). The reagent solution was contained in a glass detection cell, which also held both the capillary and the cathode. The resultant chemiluminescence was monitored directly using a photomultiplier tube mounted flush against the base of the detection cell. The methodology, which incorporated a field amplification sample introduction procedure, realised detection limits (3a baseline noise) of 5 x 10~8 M for both codeine and O6-methylcodeine and 1 x 10~7 M for thebaine. The relative standard deviations of the migration times and the peak areas for the three analytes ranged from 2.2 % up to 2.5 % and 1.9 % up to 4.6 % respectively. Following minor instrumental modifications, morphine, oripavine and pseudomorphine were determined based upon their reaction with acidic potassium permanganate in the presence of sodium polyphosphate. To ensure no migration of the permanganate anion occurred, the anode was placed at the detector end whilst the electroosmotic flow was reversed by the addition of hexadimethrine bromide (0.001% m/v) to the electrolyte. The three analytes were separated counter to the electroosmotic flow via their interaction with a-cyclodextrin. The methodology realised detection limits (3 x S/N) of 2.5 x 10~7 M for both morphine and oripavine and 5 x 10~7 M for pseudomorphine. The relative standard deviations of the migration times and the peak heights for the three analytes ranged from 0.6 % up to 0.8 % and 1.5% up to 2.1 % respectively. Further improvements were made by incorporating a co-axial sheath flow detection cell. The methodology was validated by comparing the results realised using this technique with those obtained by high performance liquid chromatography (HPLC), for the determination of both morphine and oripavine in seven industrial process liquors. A complimentary capillary electrophoresis procedure with UV-absorption detection was also developed and applied to the determination of morphine, codeine, oripavine and thebaine in nine process liquors. The results were compared with those achieved using a standard HPLC method. Although over eighty papers have appeared in the literature on the analytical applications of acidic potassium permanganate chemiluminescence, little effort has been directed towards identifying the origin of the luminescence. It was found that chemiluminescence was generated during the manganese(III), manganese(IV) and manganese(VII) oxidations of sodium borohydride, sodium dithionite, sodium sulfite and hydrazine sulfate in acidic aqueous solution. From the corrected chemiluminescence spectra, the wavelengths of maximum emission were 689 ± 5 nm and 734 ± 5 nm when the reactions were performed in sodium hexametaphosphate and sodium dihydrogenorthophosphate or orthophosphoric acid environments respectively. The corrected phosphorescence spectrum of manganese(II) sulfate in a solution of sodium hexametaphosphate at 77 K, exhibited two peaks with maxima at 688 nm and 730 nm. The chemical and spectroscopic evidence presented strongly supported the postulation that the emission was an example of solution phase chemically induced phosphorescence of manganese(II). Thereby confirming earlier predictions that the chemiluminescence from acidic potassium permanganate reactions originated from an excited manganese(II) species. Additionally, these findings have had direct analytical application in that manganese(IV) was evaluated as a new reagent for chemiluminescence detection. The oxidations of twenty five organic and inorganic species, with solublised manganese(IV), were found to elicit analytically useful chemiluminescence with detection limits (3 x S/N) for Mn(II), Fe(II), morphine and codeine of 5 x 10-8 M, 2.5 x 10-7 M, 7.5 x 10-8 M and 5 x 10-8M, respectively. The corrected emission spectra from four different analytes gave wavelengths of maximum emission in the range from 733 nm up to 740 nm indicating that these chemiluminescence reactions also shared a common emitting species, excited manganese(II). Whilst several analytical problems were addressed in this thesis and answers to certain questions regarding the fundamentals of acidic potassium permanganate chemiluminescence were proposed, there are several areas that would benefit from further research. These are outlined in the final chapter of this thesis.