Compressibility of porous magnesium foam: dependency on porosity and pore size

Mechanical properties of porous magnesium with the porosity of 35–55% and the pore size of about 70–400 μm are investigated by compressive tests focusing on the effects of the porosity and pore size on the Young's modulus and strength. Results indicated that the Young's modulus and peak stress increase with decreasing porosity and pore size. The mechanical properties of the porous magnesium were in a range of those of cancellous bone. Therefore, it is suggested that the porous magnesium is one of promising scaffold materials for hard tissue regeneration.

Modelling of porosity defects in high pressure die casting with a neural network

High Pressure Die Casting (HPDC) is a complex process that results in casting defects if configured improperly. However, finding out the optimal configuration is a non-trivial task as eliminating one of the casting defects (for example, porosity) can result in occurrence of other casting defects. The industry generally tries to eliminate the defects by trial and error which is an expensive and error -prone process. This paper aims to improve current modelling and understanding of defects formation in HPDC machines. We have conducted conventional die casting tests with a neural network model of HPDC machine and compared the obtained results with the current understanding of formation of porosity. While most of our findings correspond well to established knowledge in the field, some of our findings are in conflict with the previous studies of die casting.

Porous titanium with porosity gradients for biomedical applications

Highly porous titanium and titanium alloys with an open cell structure are promising implant materials due to their low elastic modulus, excellent bioactivity, biocompatibility and the ability for bone regeneration. However, the mechanical strength of the porous titanium decreases dramatically with increasing porosity, which is a prerequisite for the ingrowth of new bone tissues and vascularization. In the present study, porous titanium with porosity gradients, i.e. solid core with highly porous outer shell was successfully fabricated using a powder metallurgy approach. Satisfactory mechanical properties derived from the solid core and osseointegration capacity derived from the outer shell can be achieved simultaneously through the design of the porosity gradients of the porous titanium. The outer shell of porous titanium exhibited a porous architecture very close to
that of natural bone, i.e. a porosity of 70% and pore size distribution in the range of 200 - 500 μm. The peak stress and the elastic modulus of the porous titanium with a porosity gradient (an overall porosity 63%) under compression were approximately 152 MPa and 4 GPa, respectively. These
properties are very close to those of natural bone. For comparison, porous titanium with a uniform porosity of 63% was also prepared and haracterised in the present study. The peak stress and the elastic modulus were 109 MPa and 4 GPa, respectively. The topography of the porous titanium
affected the mechanical properties significantly.

Conceptual complexity and apparent contradictions in mathematics language

The article explores the conceptual complexity and apparent contradictions in the language of mathematics and suggests ways to handle these problems. Mathematics, as described the author, is a formal, artificially constructed language. One problem arises from the changes of gradient and rates of change of gradient, continuous functions. Conceptual conflicts also arise when least upperbounds and greatest lower-bounds in discussing sequences and series, convergence and limits are considered.

Improving the quality of die castings by using artificial neural networks for porosity defect modelling

The aim of this work is to improve the quality of castings by minimizing defects and scrap through the analysis of the data generated by High Pressure Die Casting (HPDC) Machines using computational intelligence techniques. Casting is a complex process that is affected by the interdependence of die casting process parameters on each other such that changes in one parameter results in changes in other parameters. Computational intelligence techniques have the potential to model accurately this complex relationship. The project has the potential to generate optimal configurations for HPDC Machines and explain the relationships between die casting process parameters.

The effects of an apparent breach of therapeutic regulations on consumers: the Pan Pharmaceuticals recall

The aim of this study was to assess how demographic variables and personal values are related to people's knowledge and cognitive and behavioural responses towards a major drug recall event that occurred in Australia in 2003. For this purpose, a survey was sent out in 2003 to 1000 households in Victoria, Australia. Households had been randomly selected from the electoral role. A total of 415 respondents participated. Results indicated that higher socioeconomic status was related to better information about the recall event and more trust in manufacturers. Respondents who held traditional or naturalistic values were likely to trust that faults in the system would be regulated by the government or consumers themselves. Parents and older respondents were more likely to be critical of the Therapeutic Goods Administration which co-ordinated the recall. Parental status, education and values were related to subsequent changes in respondents' use of complementary medicines. In light of the worth of the health supplement industry to the Australian economy, the results of this survey suggest that the Therapeutic Goods Administration should adopt a more transparent and accountable role towards the public.

Influence of porosity on shape memory behavior of porous TiNi shape memory alloy

Porous Ti-50.5at.%Ni shape memory alloy (SMA) samples with a range of  porosities were prepared by spacer sintering. The porous structure of the alloy was examined using scanning electron microscopy (SEM). The phase constituents of the porous TiNi alloy were determined by X-ray diffraction (XRD). The shape memory behavior of the porous TiNi alloy was investigated using loading–unloading compression tests. Results indicate that the porous TiNi alloy exhibits superelasticity and the recoverable strain by the superelasticity decreases with the increase of porosity. After a prestrain of 7%, the superelastically recovered strains for the porous TiNi alloy samples with porosities of 46%, 59%, 69% and 77% are 2.0%, 1.8%, 1.5% and 1.3%, respectively. The pores in the TiNi alloy samples cause stress/strain concentration, as well as crack initiation, which adversely affect the shape memory behavior of the porous TiNi alloy.

True and apparent scaling : the proximity of the Markov-switching multifractal model to long-range dependence

In this paper, we consider daily financial data of a collection of different stock market indices, exchange rates, and interest rates, and we analyze their multi-scaling properties by estimating a simple specification of the Markov-switching multifractal (MSM) model. In order to see how well the estimated model captures the temporal dependence of the data, we estimate and compare the scaling exponents H(q) (for q=1,2) for both empirical data and simulated data of the MSM model. In most cases the multifractal model appears to generate ‘apparent’ long memory in agreement with the empirical scaling laws.

Apparent in vivo Δ-6 desaturase activity, efficiency, and affinity are affected by total dietary C18 PUFA in the freshwater fish Murray cod

Dietary fatty acids are known to modulate fatty acid metabolism in fish. However, the innate capability of fish to bioconvert short chain fatty acids to health promoting long chain fatty acids (LCPUFA) is insufficient to compensate for a reduced dietary intake. While many studies have focused on the dietary regulation of the fatty acid bioconversion pathways, there is little known regarding the effects of the dietary levels of C18 polyunsaturated fatty acids (PUFA) on fatty acid metabolism. Here, we show a greater degree of apparent enzyme activity (Δ-6 desaturase) in fish fed a diet with higher amounts of dietary C18 PUFA. In particular, fish receiving high amounts of dietary C18 PUFA had a greater amount of Δ-6 desaturase activity acting on 18:3n-3 than 18:2n-6. However, with the gradual reduction of dietary C18 PUFA there was a shift in substrate preference of Δ-6 desaturase from 18:3n-3 to 18:2n-6. This information will provide valuable insight for the implementation of low fish oil diets, which permit the maintenance of n-3 LCPUFA levels in farmed Murray cod.

Three-dimensional tissue scaffolds from interbonded poly(e-caprolactone) fibrous matrices with controlled porosity

In this article, we report on the preparation and cell culture performance of a novel fibrous matrix that has an interbonded fiber architecture, excellent pore interconnectivity, and controlled pore size and porosity. The fibrous matrices were prepared by combining melt-bonding of short synthetic fibers with a template leaching technique. The microcomputed tomography and scanning electron microscopy imaging verified that the fibers in the matrix were highly bonded, forming unique isotropic pore architectures. The average pore size and porosity of the fibrous matrices were controlled by the fiber/template ratio. The matrices having the average pore size of 120, 207, 813, and 994 mm, with the respective porosity of 73%, 88%, 96%, and 97%, were investigated. The applicability of the matrix as a three-dimensional (3D) tissue scaffold for cell culture was demonstrated with two cell lines, rat skin fibroblast and Chinese hamster ovary, and the influences of the matrix porosity and surface area on the cell culture performance were examined. Both cell lines grew successfully in the matrices, but they showed different preferences in pore size and porosity. Compared with two-dimensional tissue culture plates, the cell number on 3D fibrous matrices was increased by 97.27% for the Chinese hamster ovary cells and 49.46% for the fibroblasts after 21 days of culture. The fibroblasts in the matrices not only grew along the fiber surface but also bridged among the fibers, which was much different from those on two-dimensional scaffolds. Such an interbonded fibrous matrix may be useful for developing new fiber-based 3D tissue scaffolds for various cell culture applications.