Forces between bilayers of cetyltrimethylammonium bromide in micellar solutions

A direct force-measuring technique has been used to study the interaction forces between adsorbed CTAB (cetyltrimethylammonium bromide) bilayers at concentrations well above the CMC (critical micelle concentration). An analysis of these results based on the Poisson-Boltzmann equations leads to the conclusion that CTAB micelles and adsorbed bilayers are about 22(±4)% dissociated. The apparent agreement of bilayer and micellar ion binding parameters raises an important challenge for theories of double-layer interactions. In addition, the double-layer decay lengths observed in these micellar solutions appear to be due entirely to the dissociated bromide and free CTA+ ions, with no apparent contribution from charged micelles.

Barrier textiles for protection against microbes

The presence or growth of microbes on textiles may result in a series of problems such as unpleasant odors, cross infection, disease transmission, or discoloration and deterioration of textiles. Imparting textiles with antimicrobial property can effectively eliminate these adversities and thus has been attracting great attention. This chapter summarizes the commonly used antimicrobial agents such as silver, metal oxides, photoactive dyes, quaternary ammonium compounds, N-halamines, triclosan, polybiguanides, chitosan, and plant-derived bioactive agents, their characteristics, toxicity, antimicrobial ability, ecological acceptability, and related textile finishing techniques and evaluation methods. Since durability to repeated washing is the major challenge for the practical use of antimicrobial textiles, the chapter provides details on the technique to immobilize antimicrobial agents onto fibers. In addition, impacts of using antimicrobial textiles on the environment and health are discussed in the last section.

Adsorption and voltammetry of butyltin compounds

The adsorption of tributyltin onto materials commonly used for the construction of sampling and analytical equipment from aqueous solutions of varying ionic composition has been examined. The adsorption appears to be controlled by non-polar interactions between tributyltin and the surface involved. Since the speciation and hence polarity of tributyltin is affected by the ionic composition of the medium, the extent of adsorption is affected by the salinity and pH of a sample. The adsorption is rapid and, unless strategies are adopted to eliminate its effects, may render analytical results invalid. The electrochemistry of tributyltin, dibutyltin and monobutyltin, individually and in mixtures, has been investigated in aqueous media at mercury electrodes. The basic electrochemistry of each compound is summarised by the reaction BunSn (4-n)+ + (4-n)e- right left harpoons BunSn where n is the number of butyl groups attached to the tin atom. However, the electrochemistry of each compound is largely confined to the surface of the mercury electrode, and the simplicity of the above reaction is disrupted by polymerisation reactions and by butyl exchange processes occurring with the mercury electrode. When mixtures of butyltin compounds are present, the various processes that occur for each individual compound interfere with each other. A direct voltaminetric method for the determination of butyltin compounds in natural waters is therefore probably not possible.

π-Selective stationary phases: (II) Adsorption behaviour of substituted aromatic compounds on n-alkyl-phenyl stationary phases

The frontal analysis method was used to measure the adsorption isotherms of phenol, 4-chlorophenol, p-cresol, 4-methoxyphenol and caffeine on a series of columns packed with home-made alkyl-phenyl bonded silica particles. These ligands consist of a phenyl ring tethered to the silica support via a carbon chain of length ranging from 0 to 4 atoms. The adsorption isotherm models that fit best to the data account for solute–solute interactions that are likely caused by π–π interactions occurring between aromatic compounds and the phenyl group of the ligand. These interactions are the dominant factor responsible for the separation of low molecular weight aromatic compounds on these phenyl-type stationary phases. The saturation capacities depend on whether the spacer of the ligands have an even or an odd number of carbon atoms, with the even alkyl chain lengths having a greater saturation capacity than the odd alkyl chain lengths. The trends in the adsorption equilibrium constant are also significantly different for the even and the odd chain length ligands.

Removal of VOCs by photocatalysis process using adsorption enhanced TiO2–SiO2 catalyst

Volatile organic compounds (VOCs) exist widely in both the indoor and outdoor environment. The main contributing sources of VOCs are motor vehicle exhaust and solvent utilization. Some VOCs are toxic and carcinogenic to human health, such as benzene. In this study, TiO₂–SiO₂ based photocatalysts were synthesized using the sol–gel method, with high surface areas of 274.1–421.1 m²/g obtained. Two types of pellets were used as catalysts in a fixed-bed reactor installed with a UV black light lamp. Experiments were conducted to compare their efficiencies in degrading the VOCs. Toluene was used as the VOC indicator. When the toluene laden gas stream passed through the photocatalytic reactor, the removal efficiencies were determined using a FTIR multi-gas analyser, which was connected to the outlet of the reactor to analyse the toluene concentrations. As the TiO₂–SiO₂ pellets used have a high adsorption capacity, they had dual functions as a photocatalyst and adsorbent in the hybrid photocatalysis and adsorption system. The experiments demonstrated that the porous photocatalyst with very high adsorptive capacity enhanced the subsequent photocatalysis reactions and lead to a positive synergistic effect. The catalyst can be self-regenerated by photocatalytic oxidation of the adsorbed VOCs. When the UV irradiation and feeding gas is continuous, a destruction efficiency of about 25% was achieved over a period of 20 h. Once the system was designed and operated into adsorption/regeneration mode, a higher removal efficiency of about 55% was maintained. It was found that the catalyst pellets with a higher surface area (421 m²/g) achieved higher conversion efficiency (100%) for a longer period than those with a lower surface area. A full spectrum scan was carried out using a Bio-rad Infrared spectrometer, finding that the main components of the treated gas stream leaving the reactor, along with untreated toluene, were CO₂ and water. The suspected intermediates of aliphatic hydrocarbons and CO were found in minimal amounts or were non detectable. The kinetic rate constants were calculated from the experimental results, it appeared that the stronger adsorption capacity, i.e. larger specific surface area, the higher conversion efficiency would be achieved.

Self-assembly and film stability of a micelle of a single-chain quaternary ammonium amphiphile containing azobenzene on mica

The self-assembling behavior of a single-chain quaternary ammonium amphiphile bearing azobenzene (C₁₂AzoC₆N⁺) on freshly cleaved mica sheet has been investigated by atomic force microscopy (AFM) method. Confocal microscopic Raman spectra confirm the adsorption of the self-assembled monolayer structure. Ex-situ AFM reveals that C₁₂AzoC₆N⁺ forms branch-like stripes indicating the fusion and reorganization of the micelles during drying in air as the in-situ AFM has revealed that surfactant forms spherical micelles on the mica surface. The nano-sized surface structure is strongly dependent on the change of molecular structure, which resulted from photo-induced isomerization. The nano-sized stripe is quite stable even being annealed at 90 °C for 4 h.

Measurement of surface forces between mica sheets immersed in aqueous quaternary ammonium ion solutions

Forces between mica surfaces immersed in Me4NBr, Pr4NBr, and Pe4NBr solutions over a wide concentration range are reported (Me = methyl, Pr = propyl, Pe = pentyl). In each case the cation adsorbs quite strongly onto the negatively charged mica surface and determines the double-layer potential. However, this strong adsorption does not cause complete neutralization of the negative lattice charge apparently because of packing constraints due to the large size of these ions. Adsorption of Me4N+ ions gives rise to a short-range (<2 nm) repulsive force similar to that previously observed between bilayers of CTAB and may be due to the residual hydration of these ions. The large rations also, unexpectedly, give rise to short-range repulsive forces but of a somewhat different nature. In this case, the repulsive forces can be explained by assuming that the large adsorbed ions shift the plane of charge a distance of one ion diameter from the mica surface. At all but very high concentrations these larger ions could be displaced from the mica surfaces on forcing them together. No evidence of any “hydrophobic attraction” was observed between surfaces containing these adsorbed ions. Previous studies on coagulation are discussed in the light of our results.

Electrochemical and quantum chemical assessment of two organic compounds from pyridine derivatives as corrosion inhibitors for mild steel in HCl solution under stagnant condition and hydrodynamic flow

 In this study, the inhibitive performance of two pyridine derivatives as corrosion inhibitors for mild steel was examined under stagnant condition and hydrodynamic flow in HCl solution at 25. °C. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques were employed. To explore the inhibitors adsorption mechanism, Langmuir isotherm and quantum chemical studies were used. The results of electrochemical measurements show that the inhibitor concentration has a positive effect on its efficiency while for hydrodynamic condition, it is vice versa. Corrosion attack morphologies were observed at stagnant and hydrodynamic conditions to verify qualitatively the results obtained by electrochemical methods. © 2013 Elsevier Ltd.

Reduction of oxygen in a trialkoxy ammonium-based ionic liquid and the role of water

The oxygen reduction reaction in a novel trialkoxy ammonium-based ionic liquid, N-ethyl-2-(2-methoxyethoxy)-N,N-bis(2-(2-methoxyethoxy)ethyl)ethan-1-aminium bis(trifluoromethylsulfonyl)imide, [N2(20201)(20201)(20201)] [NTf2] has been studied on glassy carbon and gold electrodes, showing faster electrokinetics on glass carbon because of weaker adsorption of the IL. This has been demonstrated by theoretical calculations and electrochemical studies. In the neat IL, the oxygen is reduced to superoxide (O2 -) through a one electron process; however, better performance is attained in the presence of water (42 mol%), in terms of current density, and onset potential of the reduction process via a reversible 2-electron process. Furthermore, a remarkable increase in cyclic coulombic efficiency is observed for the wet IL (66% in comparison with the neat IL (24%), showing the practicality of a reversible O2/H2O2 system for energy storage.