Structural studies of ambient temperature plastic crystal ion conductors

A number of novel organic ionic compounds based on the pyrrolidinium cation are described which have been found to be ion conductors in their solid states around room temperature. The properties of the compounds are consistent with their exhibiting plastic crystal phases. In order to understand some of the molecular origins of the plastic crystal behaviour and the ion conductivity that it promotes, a number of related compounds based on the imidazolium and ammonium cations are also described which have structural elements in common with the pyrrolidinium cation, but which do not show the plastic behaviour. It is found therefore that the nature of the cation is quite critical to the development of this behaviour. The alkyl methyl pyrrolidinium cation is found to produce plastic crystal phases when the alkyl chains are short, thereby preserving the ability of the cation to rotate with minimal steric hindrance. The ammonium and imidazolium cations of comparable size and structure are less able to produce these plastic phases, in many cases because the low temperature phase proceeds to melt rather than forming a stable rotator phase.

Conductivity, NMR and crystallographic study of N,N,N,N-tetramethylammonium dicyanamide plastic crystal phases : an archetypal ambient temperature plastic electrolyte material

N,N,N,N-Tetramethylammonium dicyanamide (Me₄NDCA) has been examined via differential scanning calorimetry (DSC), thermogravimetric analysis, conductivity, single crystal X-ray diffraction and ¹H nuclear magnetic resonance (NMR) analyses, and was found to be highly conductive in the solid state (σ =10−3 S cm⁻² at 420 K) and to also exhibit unusual plastic crystal behaviour. To investigate the correlation between such behaviour and the occurrence of molecular rotations in the crystal, ¹H NMR second moment measurements are compared with calculated values predicted from the crystal structure. While DSC analysis indicates a number of solid–solid transitions at ambient temperatures, subsequent ¹H NMR analysis of the Me₄N⁺ cation shows that a variety of rotational motions become active at low (<240 K) temperatures, and that such transitions in rotational states occur over a range of temperatures rather than in a sharp transition. Conductivity analysis reveals that between 320 K and 420 K the conductivity increases by more than six orders of magnitude in the solid state, in line with the transition of the Me₄N⁺ cation to a diffusive state, and that other phase transitions observed in this temperature range have no marked effect on the conductivity. Conduction in this solid state is therefore envisaged to involve a vacancy-diffusion model, involving Me₄N⁺ cation vacancies.

Synthesis and properties of ambient temperature molten salts based on the quaternary ammonium ion

The synthesis of 16 tetraalkyl ammonium bis(trifluoromethane sulfonyl) imide salts, (C_nH_2n+1)₄ +N -N (SO₂CF₃)₂ (n = 1, 2, 3, 4),  (C₂H₅)₂(i-C₃H₇)₂ +N -N(SO₂CF₃)₂, (C₂H₅)(CH₃)(i-C₃H₇)₂+N-N(SO₂CF₃)₂, (n-C₇H₁₅)(C₂H₅)i-C₃H₇)₂+N-N(SO₂CF₃)₂ and (C_nH_2n+1)(C_mH_2m+1)₃+N-N(SO₂CF₃)₂ (n = 6,7,8; m = 1, 2, 4) are reported in this paper. Trends in properties of these salts are discussed. The symmetrical tetraalkyl ammonium salts with the bis(trifluoromethyl sulfonyl) imide anion exhibited a lower melting point than that of corresponding ammonium halides. The salts with low symmetry ammonium cations were found to be of generally lower melting point, and many were stable liquids at room temperature. Several of these did not crystallize during cooling below room temperature and exhibited glass transition temperatures in the region of −60 °C∼−80 °C. A comparison of properties between the ammonium imide salts and corresponding trifluoromethane sulfonates is also presented.

N,N-Dimethylpyrrolidinium hydroxide : a highly conductive solid material at ambient temperature

N,N-Dimethylpyrrolidinium hydroxide (P₁₁OH·4H₂O) was found to exhibit high ionic conductivity in the solid state (7 × 10⁻³ S cm⁻¹ at 25°C) and unusual thermal properties, and ²H solid state NMR measurements indicate liquid-like mobility of the deuterium species in the solid state of P₁₁OD·4.5D₂O.

Ambient temperature plastic crystal electrolyte for efficient, all-solid-state dye-sensitized solar cell

Doping the molecular plastic crystal of succinonitrile with solid N-methyl-N-butylpyrrolidinium iodide salt and iodine has produced a highly conductive solid iodide/triiodide conductor. Furthermore, it was employed for a highly efficient, all-solid-state dye-sensitized solar cell.

Exhaled air temperature as a function of ambient temperature in flying and resting ducks

Exhaled air temperature (T exh) has a paramount effect on respiratory water loss during flight. For migratory birds, low T exh potentially reduces water loss and increases flight range. However, only three studies provide empirical data on T exh during flight. The aim of this study was to record T exh of birds during rest and flight at a range of controlled ambient temperatures (T amb). One wigeon and two teal flew a total of 20 times in a wind tunnel at T amb ranging from 1° to 24°C. T exh during flight did not differ between the two species and was strongly correlated with T amb (T exh=1.036 T amb + 13.426; R²=0.58). In addition, body temperature had a weak positive effect on T exh. At a given T amb, T exh was about 5°C higher during flight than at rest.

Positive association between ambient temperature and salmonellosis notifications in New Zealand, 1965-2006

Objective: To investigate the temporal relationship between the monthly count of salmonellosis notifications and the monthly average temperature in New Zealand during the period 1965–2006.

Methods: A negative binomial regression model was used to analyse monthly average ambient temperature and salmonellosis notifications in New Zealand between 1965 and 2006.

Results: A 1°C increase in monthly average ambient temperature was associated with a 15% increase in salmonellosis notifications within the same month (IRR 1.15; 95% CI 1.07 – 1.24).

Conclusion: The positive association found in this study between temperature and salmonellosis notifications in New Zealand is consistent with the results of studies conducted in other countries. New Zealand is projected to experience an increase in temperature due to climate change. Therefore, all other things being equal, climate change could increase salmonellosis notifications in New Zealand.

Implications: This association between temperature and salmonellosis should be considered when developing public health plans and climate change adaptation policies. Strategically, existing food safety programs to prevent salmonellosis could be intensified during warmer periods. As the association was strongest within the same month, focusing on improving food handling and storage during this time period may assist in climate change adaptation in New Zealand.

Performance of tropical fish recruiting to temperate habitats: role of ambient temperature and implications of climate change

The warming of coastal oceans due to climate change is increasing the overwinter survival of tropical fishes transported to temperate latitudes by ocean currents. However, the processes governing early post-arrival mortality are complex and can result in minimum threshold temperatures for overwinter survival, which are greater than those predicted based upon physiological temperature tolerances alone. This 3.5 mo laboratory study monitored the early performance of a tropical damselfish Abudefduf vaigiensis that occurs commonly during austral summer along the SE Australian coast, under nominal summer and winter water temperatures, and compares results with a co-occurring year-round resident of the same family, Parma microlepis. Survivorship, feeding rate, growth and burst swimming ability (as a measure of predator escape ability) were all reduced for the tropical species at winter water temperatures compared to those in summer, whereas the temperate species experienced no mortality and only feeding rate was reduced at colder temperatures. These results suggest that observed minimum threshold survival temperatures may be greater than predicted by physiology alone, due to lowered food intake combined with increased predation risk (a longer time at vulnerable sizes and reduced escape ability). Overwinter survival is a significant hurdle in pole-ward range expansions of tropical fishes, and a better understanding of its complex processes will allow for more accurate predictions of changes in biodiversity as coastal ocean temperatures continue to increase due to climate change.

An organic ionic plastic crystal electrolyte for rate capability and stability of ambient temperature lithium batteries

Reliable, safe and high performance solid electrolytes are a critical step in the advancement of high energy density secondary batteries. In the present work we demonstrate a novel solid electrolyte based on the organic ionic plastic crystal (OIPC) triisobutyl(methyl)phosphonium bis(fluorosulfonyl)imide (P1444FSI). With the addition of 4 mol% LiFSI, the OIPC shows a high conductivity of 0.26 mS cm-1 at 22 °C. The ion transport mechanisms have been rationalized by compiling thermal phase behaviour and crystal structure information obtained by variable temperature synchrotron X-ray diffraction. With a large electrochemical window (ca. 6 V) and importantly, the formation of a stable and highly conductive solid electrolyte interphase (SEI), we were able to cycle lithium cells (LiLiFePO4) at 30 °C and 20 °C at rates of up to 1 C with good capacity retention. At the 0.1 C rate, about 160 mA h g-1 discharge capacity was achieved at 20 °C, which is the highest for OIPC based cells to date. It is anticipated that these small phosphonium cation and [FSI] anion based OIPCs will show increasing significance in the field of solid electrolytes.

Stress-induced rise in body temperature is repeatable in free-ranging Eastern chipmunks (Tamias striatus)

In response to handling or other acute stressors, most mammals, including humans, experience a temporary rise in body temperature (T b). Although this stress-induced rise in T b has been extensively studied on model organisms under controlled environments, individual variation in this interesting phenomenon has not been examined in the field. We investigated the stress-induced rise in T b in free-ranging eastern chipmunks (Tamias striatus) to determine first if it is repeatable. We predicted that the stress-induced rise in T b should be positively correlated to factors affecting heat production and heat dissipation, including ambient temperature (T a), body mass (M b), and field metabolic rate (FMR). Over two summers, we recorded both T b within the first minute of handling time (T b1) and after 5 min of handling time (T b5) 294 times on 140 individuals. The mean ∆T b (T b5 – T b1) during this short interval was 0.30 ± 0.02°C, confirming that the stress-induced rise in T b occurs in chipmunks. Consistent differences among individuals accounted for 40% of the total variation in ∆T b (i.e. the stress-induced rise in T b is significantly repeatable). We also found that the stress-induced rise in T b was positively correlated to T a, M b, and mass-adjusted FMR. These results confirm that individuals consistently differ in their expression of the stress-induced rise in T b and that the extent of its expression is affected by factors related to heat production and dissipation. We highlight some research constraints and opportunities related to the integration of this laboratory paradigm into physiological and evolutionary ecology.

Individual boldness traits influenced by temperature in male Siamese fighting fish.

Temperature has profound effects on physiology of ectothermic animals. However, the effects on temperature variation on behavioral traits are poorly studied in contrast to physiological endpoints. This may be important as even small differences in temperatures have large effects on physiological rates including overall metabolism, and behavior is known to be linked to metabolism at least in part. The primary aim of this study was to determine the effects of ambient temperature on boldness responses of a species of fish commonly used in behavioral experiments, the Siamese fighting fish (Betta splendens). At 26°C, subjects were first examined for baseline behaviors over three days, using three different (but complementary) 'open field' type assays tested in a fixed order. Those same fish were next exposed to either the same temperature (26°C) or a higher temperature (30°C) for 10days, and then the same behavioral assays were repeated. Those individuals exposed to increased temperatures reduced their latency to leave the release area (area I), spent more time in area III (farthest from release area), and were more active overall; together we infer these behaviors to reflect an increase in general 'boldness' with increased temperature. Our results add to a limited number of studies of temperature effects on behavioral tendencies in ectotherms that are evident even after some considerable acclimation. From a methodological perspective, our results indicate careful temperature control is needed when studying behavior in this and other species of fish.

Slip during tension testing of Mg-3A1-1Zn sheet

The activation of slip and twinning deformation modes in Mg-3Al-1Zn alloy was investigated by means of both in-situ and ex-situ methods at ambient temperature using electron back scattering diffraction (EBSD). The results confirm the importance of non-basal slip and c-axis compression double twinning. During tensile deformation of rolled sheet, 63% of the observed slip traces were ascribed to prismatic slip, 33% to basal slip and 4% to <c+a> slip. Prismatic slip was frequently observed in grain interiors. The density of twinning was quantified in samples tested along transverse, extrusion and rolling directions at failure. The values in the range of 0.02-0.18 twins per square micron were found depending on sample orientation. The results show the effect of twinning on failure.

Carbon nanotubes formed in graphite after mechanical grinding and thermal annealing

Multi-walled carbon nanotubes with cylindrical and bamboo-type structures are produced in a graphite sample after mechanical milling at ambient temperature and subsequent thermal annealing up to 1400 °C. The ball milling produces a precursor structure and the thermal annealing activates the nanotube growth. Different nanotubular structures indicate different formation mechanisms: multi-wall cylindrical carbon nanotubes are probably formed upon micropores and the bamboo tubes are produced because of the metal catalysts. A two-dimensional growth governed by surface diffusion is believed to be one important factor for the nanotube growth. A potential industrial production method is demonstrated with advantages of large production quantity and low cost.