An evaluation of the viability of photovoltaics in residential schemes managed by UK registered social landlords

Global demands on fossil fuels require the investigation of renewable and viable alternative energy supplies. The Intergovernmental Panel on Climate Change (IPCC) has concluded that current consumption of fossil fuels is untenable as atmospheric emissions of gases, in particular carbon dioxide (CO²), is having a significant and worsening effect on global climate change (IPCC 1992).

25% of UK CO² emissions are generated in the housing sector (UKCCP 2000). As major providers of UK social housing, Registered Social Landlords (RSLs), indirectly make a significant contribution to UK CO² emissions. In delivering UK Government policies, RSLs are required to meet national social and economic targets, as well as environmental targets. Clearly, social, environmental and economic issues combine in the arena of energy efficiency and social housing.

Potentially, the use of photovoltaics (PV) in social housing could assist the UK government in meeting targets in terms of affordable housing, providing "free" electricity to low income tenants, and with minimal environmental impact in urban areas. However, uptake of PV amongst RSLs in the UK has been minimal to date. This paper explores the factors that act as barriers to energy efficiency in this market.

Do we challenge students enough? Model Solar vehicle project challenges potential engineers.

A major challenge to Australia and New Zealand is the perceived need to develop "knowledge economies" based on the expertise of university graduates,  especially engineers. However, many countries are finding less students are choosing to study engineering. At the same time, there is increasing concern about increased levels of greenhouse gases leading to global warming with species loss, rising sea levels and desertification being likely outcomes. Numerous competitions have been established aimed at attracting school students into science and engineering careers. Environmental groups have also sponsored educational activities to increase student awareness of alternative energy technologies. One activity which provides both a science and engineering challenge while also raising awareness of alternative energy and more efficient conversion of that energy for transport is the Model Solar Vehicle Challenge (MSVC). The Challenge, which provides a solar powered boat competition for younger students and a car race for the older ones, has involved thousands of Victorian school students since 1990 and students from all Australian states since 1993. Boats race in 2 or 3 lanes guided by an overhead wire in a 10 metre pool, and cars race 100 metres around a figure 8 track. Top boats average over 7 kph and cars reach speeds of 25 kph at the finish line. This paper will discuss the conduct of the Challenge, motivation of participants, the depth of learning which can be achieved and the effectiveness of the Challenge in encouraging students to continue with science subjects through school and to select engineering at university. It will also briefly discuss the lessons that can be learnt from the MSVC and applied to first year university courses.

Decoupled ion conduction in poly(2-acrylamido-2-methyl-1-propane-sulfonic acid) homopolymers

As the focus on developing new polymer electrolytes continues to intensify in the area of alternative energy conversion and storage devices, the rational design of polyelectrolytes with high single ion transport rates has emerged as a primary strategy for enhancing device performance. Previously, we reported a series of sulfonate based copolymer ionomers based on using mixed bulky quaternary ammonium cations and sodium cations as the ionomer counterions. This led to improvements in the ionic conductivity and an apparent decoupling from the Tg of the ionomer. In this article, we have prepared a new series of ionomers based on the homopolymer of poly(2-acrylamido-2-methyl-1-propane-sulfonic acid) using differing sizes of the ammonium counter-cations. We observe a decreasing Tg with increasing the bulkiness of the quaternary ammonium cation, and an increasing degree of decoupling from Tg within these systems. Somewhat surprisingly, phase separation is observed in this homopolymer system, as evidenced from multiple impedance arcs, Raman mapping and SEM. The thermal properties, morphology and the effect of plasticizer on the transport properties in these ionomers are also presented. The addition of 10 wt% plasticizer increased the ionic conductivity between two and three orders of magnitudes leading to materials that may have applications in sodium based devices. This journal is

Energy and greenhouse gas emissions implications of alternative housing types for Australia

Many cities around the world are looking for ways to reduce their per capita greenhouse gas emissions. The outward growth of cities from a central business district, typical of many cities around the world, is often seen as working against this goal and as unsustainable. This is especially the case in circumstances where this growth is not supported by the necessary infrastructure, often resulting in an increase in the use of private transport. However, alternative scenarios to contain the outward growth are being proposed. This paper provides a comparison of the energy demand and greenhouse gas emissions between typical detached outer-suburban housing currently being built in Australia's major cities and inner-city and -suburban apartments, which are increasingly seen as a legitimate alternative to the housing that is currently being built on our outer city fringes. By analysing the energy demand associated with the construction and operation of each housing type and for occupant travel it was found that the location of the housing and its size are the dominant factors determining energy use and greenhouse gas emissions. The findings from this analysis provide useful information for policy-makers in planning the development of our cities into the future, when faced with a growing population and an increasing need to minimise greenhouse gas emissions.

CO2 credit or energy credit in emission trading?

Emission trading is a good concept and approach to tackle global warming. However, what “currency” or “credit” should be used in the trading has remained a debatable topic. This paper proposed an “Energy Credit” concept as an alternative to the “CO₂ credit” that is currently in place. From the thermodynamic point of view, the global warming problem is an “energy balance” problem. The energy credit concept is thought to be more thermodynamically correct and tackles the core of the global warming problem more directly. The Energy credit concept proposed can be defined as: the credit to offset the extra energy trapped/absorbed in the earth (and its atmosphere) due to the extra anthropogenic emission (or other activities) by a country or company. A couple of examples are given in the paper to demonstrate the concept of the Energy credit and its advantages over the CO₂ credit concept.

The core of the global warming problem: energy

From the thermodynamic point of view, the global warming problem is an ''energy balance'' problem. The heat (energy) accumulation in the earth and its atmosphere is the cause of the global warming. This accumulation is mainly due to the imbalance of (solar) energy reaching and the energy leaving the earth, caused by ''greenhouse effect'' in which the CO₂ and other greenhouse gases play a critical role; so that balance of the energy entering and leaving the earth should be the key to solve the problem. Currently in the battle of tackling the global warming, we mainly focus on the development of CO₂-related measures, i.e., emission reduction, CO₂ sequestration, and CO₂ recycle technologies. It is right in technical aspect, because they are attempting thinner the CO₂ ''blanket'' around the earth. However, ''Energy'' that is the core of the problem has been overlooked, at least in management/policy aspect. This paper is proposing an ''Energy Credit'' i.e., the energy measure concept as an alternative to the ''CO₂ credit'' that is currently in place in the proposed emission trading scheme. The proposed energy credit concept has the advantages such as covering broad activities related to the global warming and not just direct emissions. Three examples are given in the paper to demonstrate the concept of the energy measure and its advantages over the CO₂ credit concept.

Solar adsorption refrigeration : an alternative/auxiliary way for thermal storage for air conditioning

This paper presents an idea of using solar powered adsorption ice making system as an alternative or an auxiliary way for the traditional ice storage air conditioning systems. A simple solar adsorption refrigeration system runs in intermittent cycle. It makes cooling effect at night, and the cooling effect can be stored for the day use. It fits in well with the cycle of the existing off-peak ice storage air conditioning system. On the top of green effect of the solar powered ice making system, the idea is specifically beneficial for places where the price of the off-peak electricity is not significantly lower than peak price. Based on our many years experience on the solar ice making systems, the paper discusses the technical feature of the solar ice making technology and the solutions we are working on to attack the problems which may have potential damage to application of the solar ice making system for air conditioning purposes.

Energy efficient on-demand addressing for wireless sensor networks

Conserving of battery power is a critical requirement in WSNs. Past studies have shown that the transceiving process consumes more energy than the internal processing. This work focuses on eliminating overhead messages used for address allocation by employing multiple base-stations. In this context we explore address allocation without Duplicate Address Detection (DAD). We present an alternative approach to Duplicate address detection using the sink as an address pool to maintain and systematize available addresses. Experimental results show that this approach eliminates overhead messages generated by DAD; resulting in energy savings when used in conjunction with an on-demand address allocation mechanism.

Electrosorption: an alternative option for desalination

Electrosorption is generally defined as adsorption on the surfaces of charged electrodes by applying potential or current. Electrosorption deionization method is a low-pressure non-membrane deionization process, with the potential to be a low energy cost alternative for desalination in the future. In this paper, the principle and mechanism of the electrosorption deionization method are discussed, the materials and properties of the electrode used in electrosorption process are summarized and the application and prospect of this promising desalination method are reviewed.

A comprehensive framework for assessing the life cycle energy of building construction assemblies

Environmental decision making during the building design process has typically focused on improvements to operational efficiencies. Improvements to thermal performance and efficiency of appliances and systems within buildings both aim to reduce resource consumption and environmental impacts associated with the operation of buildings. Significant reductions in building energy and water consumption are possible; however often the impacts occurring across the other stages of a building‘s life are not considered or are seen as insignificant in comparison.

Previous research shows that embodied impacts (raw material extraction, processing, manufacture, transportation and construction) can be as significant as those related to building operation. There is, however, limited consistent and comprehensive information available for building designers to make informed decisions in this area. Often the information that is available is from disparate sources, which makes comparison of alternative solutions unreliable and risky. lt is also important that decisions are made from a life cycle perspective, ensuring that strategies to reduce environmental impacts from one life cycle stage do not come at the expense of an increase in overall life cycle impacts

A consistent and comprehensive framework for assessing and specifying building assemblies for enhanced environmental outcomes does not currently exist. This paper presents the initial findings of a project that aims to establish a database of the life cycle energy requirements of a broad range of construction assemblies, based on a comprehensive assessment framework. Life cycle energy requirements have been calculated for eight standard residential construction assemblies integrating an innovative embodied energy assessment technique with thermal performance simulation modelling and ranked according to their performance.

Physiological response to extreme fasting in subantarctic fur seal (Arctocephalus tropicalis) pups : metabolic rates, energy reserve utilization, and water fluxes

Physiological response to extreme fasting in subantarctic fur seal (Arctocephalus tropicalis) pups: metabolic rates, energy reserve utilization, and water fluxes. Am J Physiol Regul Integr Comp Physiol 297: R1582–R1592, 2009. First published September 23, 2009; doi:10.1152/ajpregu.90857.2008.— Surviving prolonged fasting requires various metabolic adaptations, such as energy and protein sparing, notably when animals are simultaneously engaged in energy-demanding processes such as growth. Due to the intermittent pattern of maternal attendance, subantarctic fur seal pups have to repeatedly endure exceptionally long fasting episodes throughout the 10-mo rearing period while preparing for nutritional independence. Their metabolic responses to natural prolonged fasting (33.4 ± 3.3 days) were investigated at 7 mo of age. Within 4–6 fasting days, pups shifted into a stage of metabolic economy characterized by a minimal rate of body mass loss (0.7%/day) and decreased resting metabolic rate  (5.9 ± 0.1 ml O₂ ·kg^-1·day^-1) that was only 10% above the level predicted for adult terrestrial mammals. Field metabolic rate (289 ± 10 kJ·kg^-1 ·day^-1) and water influx (7.9 ± 0.9 ml·kg^-1 ·day^-1) were also among the lowest reported for any young otariid, suggesting minimized energy allocation to behavioral activity and thermoregulation. Furthermore, lean tissue degradation was dramatically reduced. High initial adiposity (>48%) and predominant reliance on lipid catabolism likely contributed to the exceptional degree of protein sparing attained. Blood chemistry supported these findings and suggested utilization of alternative fuels, such as β-hydroxybutyrate and de novo synthesized glucose from fat-released glycerol. Regardless of sex and body condition, pups tended to adopt a convergent strategy of extreme energy and lean body mass conservation that appears highly adaptive for it allows some tissue growth during the repeated episodes of prolonged fasting they experience throughout their development.

Relationship between indices of adiposity obtained by peripheral quantitative computed tomography and dual-energy X-ray absorptiometry in pre-pubertal children

Background/Aim: The study investigated the relationship between indices of adiposity measured by peripheral quantitative computed tomography (pQCT) and dual-energy X-ray absorptiometry (DXA) in pre-pubertal children.

Subjects and methods: DXA-derived per cent body fat (%BF) was measured in 284 boys and 288 girls, aged 7–10 years. Cross-sections of the forearm (n=427) and lower leg (n=560) were obtained by pQCT to measure total cross-sectional area of the limb (Total CSA), Muscle CSA, Fat CSA, %Fat CSA (Fat CSA/Total CSA×100) and muscle density.

Results: Peripheral QCT-derived %Fat CSA in the forearm and lower leg correlated strongly with DXA-derived %BF (r=0.83–0.89, p<0.01) in both boys and girls. However, forearm and lower leg %Fat CSA were higher than whole body %BF by 5% and 10%, respectively. A better prediction of whole-body %BF was achieved by including %Fat CSA, muscle density and height into a hierarchical regression model. Using sex-specific regression equations, 87.7% of the boys and 83.7% of the girls had a predicted %BF within 3% units of the %BF obtained by DXA.

Conclusion: In pre-pubertal children, pQCT measures of adiposity are strongly associated with whole-body per cent body fat. This reproducible method could be an alternative technique to estimate body composition in this population.

Impact of past and future residential housing development patterns on energy demand and related emissions

The continued outward growth from a central business district has been the dominant characteristic of most cities in Australia. However, this feature is seen as unsustainable and alternative scenarios to contain the outward growth are being proposed. Melbourne is currently grappling with this issue while simultaneously trying to reduce per capita greenhouse gas emissions. Housing size, style and its location are the three principal factors which determine the emissions from the residential sector. This paper describes a methodology to assess the combined impact of these factors on past and possible future forms of residential development in Melbourne. The analysis found that the location of the housing and its size are the dominant factors determining energy use and greenhouse gas emissions.

Optimising the life cycle energy performance of residential buildings

A holistic approach to low-energy building design is essential to ensure that any efficiency improvement strategies provide a net energy benefit over the life of the building. Previous work by the authors has established a model for informing low-energy building design based on a comparison of the life cycle energy demand associated with a broad range of building assemblies. This model ranks assemblies based on their combined initial and recurrent embodied energy and operational energy demand. The current study applies this model to an actual residential building in order to demonstrate the application of the model for optimising a building’s life cycle energy performance. The aim of this study was to demonstrate how the availability of comparable energy performance information at the building design stage can be used to better optimise a building’s energy performance. The life cycle energy demand of the case study building, located in the temperate climate of Melbourne, Australia, was quantified using a comprehensive embodied energy assessment technique and TRNSYS thermal energy simulation software. The building was then modelled with variations to its external assemblies in an attempt to optimise its life cycle energy performance. The alternative assemblies chosen were those shown through the author’s previous modelling to result in the lowest life cycle energy demand for each building element. The best performing assemblies for each of the main external building elements were then combined into a best-case scenario to quantify the potential life cycle energy savings possible compared to the original building. The study showed that significant life cycle energy savings are possible through the modelling of individual building elements for the case study building. While these findings relate to a very specific case, this study demonstrates the application of a model for optimising building life cycle energy performance that may be applied more broadly during early-stage building design to optimise life cycle energy performance.