Study of acoustic emission (AE) caused by high voltage insulators

Acoustic emission (AE) study based on the acoustic signal ranges from 30MHz to 300MHz has been performed to diagnose the deterioration of insulation level in outdoor ceramic insulator. Different weather conditions combining with artificially created pollution were produced in laboratory and measurements were recorded over a fixed period of time. Pollution due to fine dust particles has been created according to IEC standard under wet and dry conditions. Samples that exhibit internal cracks and fracture were used in this study. The collected AE signals were sampled and analysed using fractal theory. The results of this study have clearly demonstrated the prospect of using AE technique to monitor the working condition of outdoor insulator.

2-Amino-3-aroyl-4,5-alkylthiophenes: Agonist allosteric enhancers at human A1 adenosine receptors

2-Amino-3-benzoylthiophenes are allosteric enhancers (AE) of agonist activity at the A₁ adenosine receptor. The present report describes syntheses and assays of the AE activity at the human A₁AR (hA₁AR) of a panel of compounds consisting of nine 2-amino-3-aroylthiophenes (3a-i), eight 2-amino-3-benzoyl-4,5-dimethylthiophenes (12a-h), three 3-aroyl-2-carboxy-4,5- dimethylthiophenes (15a-c), 10 2-amino-3-benzoyl-5,6-dihydro 4H-cyclopenta[b]thiophenes (17a-j), 14 2-amino-3-benzoyl-4,5,6,7-tetrahydrobenzo[b]thiophenes (18a-n), and 15 2-amino- 3-benzoyl-5,6,7,8-tetrahydro-4H-cyclohepta[b]thiophenes (19a-o). An in vitro assay employing the A₁AR agonist [¹²⁵I]ABA and membranes from CHO-K1 cells stably expressing the hA¹AR measured, as an index of AE activity, the ability of a candidate AE to stabilize the agonist- A₁AR-G protein ternary complex. Compounds 3a-i had little or no AE activity, and compounds 12a-h had only modest activity, evidence that AE activity depended absolutely on the presence of at least a methyl group at C-4 and C-5. Compounds 17a-c lacked AE activity, suggesting the 2-amino group is essential. Polymethylene bridges linked thiophene C-4 and C-5 of compounds 17a-j, 18a-n, and 19a-o. AE activity increased with the size of the -(CH₂)_n- bridge, n ) 3 < n ) 4 < n ) 5. The 3-carbethoxy substituents of 17a, 18a, and 19a did not support AE activity, but a 3-aroyl group did. Bulky (or hydrophobic) substituents at the meta and para positions of the 3-benzoyl group and also 3-naphthoyl groups greatly enhanced activity. Thus, the hA₁AR contains an allosteric binding site able to accommodate 3-aroyl substituents that are bulky and/or hydrophobic but not necessarily planar. A second region in the allosteric binding site interacts constructively with alkyl substituents at thiophene C-4 and/or C-5.

Who, when and where? Identification of patients at risk of an in-hospital adverse event: Implications for nursing practice

Patients who suffer an adverse event (AE) are more likely to die or suffer permanent disability. Many AEs are preventable. Nurses have long played a pivotal role in the prevention of AEs. Much of the literature to date pertains to the role of nurses in the prevention of AEs such as falls, pressure areas and deep vein thrombosis. Prominent risk factors for AEs are the presence of physiological abnormality, failure to recognize or correct physiological abnormality, advanced patient age and location of patient room. Ongoing physiological assessment of patients is a nursing responsibility and the assessment findings of nurses underpin many patient care decisions. The early recognition and correction of physiological abnormality can improve patient outcomes by reducing the incidence of AEs, making nurses' ability to identify, interpret and act on physiological abnormality a fundamental factor in AE prediction and prevention. This paper will examine the role of nurses in AE prevention, using cardiac arrest as an example, from the perspective of physiological safety; that is, accurate physiological assessment and the early correction of physiological abnormality.

Combining extension matrix and integer programming for optimal concept learning

This paper proposes two integer programming models and their GA-based solutions for optimal concept learning. The models are built to obtain the optimal concept description in the form of propositional logic formulas from examples based on completeness, consistency and simplicity. The simplicity of the propositional rules is selected as the objective function of the integer programming models, and the completeness and consistency of the concept are used as the constraints. Considering the real-world problems that certain level of noise is contained in data set, the constraints in model 11 are slacked by adding slack-variables. To solve the integer programming models, genetic algorithm is employed to search the global solution space. We call our approach IP-AE. Its effectiveness is verified by comparing the experimental results with other well- known concept learning algorithms: AQ15 and C4.5.

Force modelling of the crankshaft pin grinding process.

A force model was developed for crankshaft pin grinding to predict the forces generated during grinding. The force model developed builds on the authors’ previously developed model, which predicted the out-of-roundness in crankshaft pin grinding. The model includes key grinding variables, such as the work removal parameter (WRP), system sti€ ness and Young’s modulus to determine the end forces produced. The model also includes the important geometrical relationships that are unique to this type of grinding. The model was veriŽ ed using an experiential set-up involving sophisticated strain gauge force measurements on a commercial Landis CP grinding machine, with close correlation between the results and the model.

Gait termination : a review of experimental methods and the effects of aging and gait pathologies

The study of human gait has expanded and diversified to the extent that it is now possible to identify a substantive literature concerning a variety of gait tasks, such as gait initiation [Halliday SE, Winter DA, Frank JS, Patla AE, Prince F. The initiation of gait in young, elderly, and Parkinson's disease subjects. Gait Posture 1998;8:8–14; Mickelborough J, van der Linden ML, Tallis RC, Ennos AR. Muscle activity during gait initiation in normal elderly people. Gait Posture 2004;19:50–57], stepping over and across obstacles [Patla AE, Prentice SD, Robinson C, Newfold J. Visual control of locomotion: strategies for changing direction and for going over obstacles. J Exp Psych 1991;17:603–34; Chen, HC, Ashton-Miller JA, Alexander NB, Schultz AB. Effect of age and available response time on ability to step over an obstacle. J Gerontol 1994;49:227–33; Sparrow WA, Shinkfield AJ, Chow S, Begg RK. Gait characteristics in stepping over obstacles. Hum Mov Sci 1996;15:605–22; Begg RK, Sparrow WA, Lythgo ND. Time-domain analysis of foot–ground reaction forces in negotiating obstacles. Gait Posture 1998;7:99–109; Patla AE, Rietdyk S. Visual control of limb trajectory over obstacles during locomotion: effect of obstacle height and width. Gait Posture 1993;1:45–60] negotiating raised surfaces such as curbs and stairs [Begg RK, Sparrow WA. Gait characteristics of young and older individuals negotiating a raised surface: implications for the prevention of falls. J Gerontol Med Sci 2000;55A:147–54; Mcfayden BJ, Winter DA. An integrated biomechanical analysis of normal stair ascent and descent. J Biomech 1988;21:733–44]. In addition, increasing research interest in age-related declines in gait that might predispose individuals to falls has engendered a very extensive literature concerning ageing effects on gait. While rapid locomotor adjustments are common in the course of daily activities there has been no previous review of the findings concerning gait adaptations when walking is terminated both rapidly and unexpectedly. The aims of this review were first, to summarise the key research findings and methodological considerations from studies of termination. The second aim was to demonstrate the effects of ageing and gait pathologies on termination with respect to the regulation of step characteristics, lower-limb muscle activation patterns and foot–ground reaction forces.

Acoustic condition monitoring for cold metal forming

One of the most important objectives of cold metal forming research is to develop techniques that enable better manufacturing efficiencies. Within this monitoring of tooling condition is vital to providing high quality manufacturing. The objective of this research is to determine the signature derived from Acoustic Emission (AE) sensors, in order to establish the current condition of a machine tool, as applied to bolt-making. From here we aim to develop and implement an on-line condition monitoring tool for the cold forming process. A review of the literature has shown that much research into AE has been successfully applied in metal cutting operations; such as milling, drilling and turning, but little research has been done related to metal forming. This appears to be due to the complexity of obtaining consistent signals using Acoustic Emission systems, because the presence of noise in many forms. This paper will detail many of the AE signals acquired and analysed through our research. The extensive results indicate this form of condition monitoring is not suitable for metal forming in its current configuration. Further tests are proposed to enable such research to move forward, so a condition monitoring system can be established.

Modeling the tensile strains of non-uniform fibers

The maximum strain experienced by the thinnest segment of a non-uniform fiber governs fiber breakage, yet this maximum strain can not be obtained from a normal single fiber test. Only the average strain of the whole fiber specimen can be obtained from a normal single fiber tensile test. This study has examined the relationship between the average strain, the maximum strain and the degree of fiber non-uniformity, expressed in coefficient of variation (CV) of fiber diameters along fiber length. The tensile strain of irregular fibers has been simulated using the finite element method (FEM). Using this method, average and maximum tensile strains of non-uniform fibers were calculated. The results indicate that for irregular fibers such as wool, there is an exponential relationship (i.e.ɛ _ave ɛ _max=ae ^{−b CV} ) between the ratio of average breaking strain and maximum breaking strain (ɛ _ave ɛ _max) and the along-fiber diameter variation (CV). The strain ratio decreases with the increase of the along-fiber diameter variation.

A mechanistic study on altered pharmacokinetics of irinotecan by St. Johns wort

Irinotecan (CPT-11) is an important anticancer drug in management of advanced colon cancer. A marked protective effect on CPT-11-induced blood and gastrointestinal toxicity is obtained by combination of St. John's wort (SJW) in recent clinical and rat studies. However, the mechanism is unclear. This study aimed to explore the effects of SJW on the pharmacokinetics of CPT-11 and its major metabolites (SN-38 and SN-38 glucuronide) in rats and the underlying mechanisms using several in vitro models. Short-term (3 days) and long-term (14 days) pretreatment with SJW were conducted in rats to examine the effects of co-administered SJW on the plasma pharmacokinetics of CPT-11, SN-38 and SN- 38 glucuronide. Rat liver microsomes and a rat hepatoma cell line, H4-II-E cells, were utilized to study the effects of aqueous and ethanolic extracts (AE and EE) and major active components (hyperforin, hypericin and quercetin) of SJW on CPT-11 and SN-38 metabolism and intracellular accumulation. Co-administered SJW for consecutive 14 days significantly decreased the initial plasma concentration (C0) of CPT-11, the area under the concentration-time curve (AUC0-10hr) and maximum plasma concentration (Cmax) of SN-38. The ethanolic extracts (EE) of SJW at 5 μ g/ml significantly decreased SN-38 glucuronidation by 45% (P < 0.05) in rat hepatic microsomes. Pre-incubation of aqueous SJW extracts (AE) at 10 g/ml, SJW EE at 5 μg/ml, and quercetin at 10μ M significantly increased the glucuronidation of SN-38 in H4- II-E cells. A 2-hr pre-incubation of quercetin (100μ M) significantly increased the intracellular accumulation of CPT-11 (P < 0.05). However, pre-incubation of hypericin (20 nM and 200 nM) and hyperforin (1μ M) significantly decreased the intracellular accumulation of CPT-11. In addition, pre-incubation of hypericin, SJW EE and quercetin significantly increased the intracellular accumulation of SN-38. Aqueous and ethanolic SJW extracts and its major active components did not alter the plasma protein binding of CPT-11 and SN-38. These results indicated that the aqueous and ethanolic extracts of SJW and its major active components could markedly alter glucuronidation of SN-38 and intracellular accumulation of CPT-11 and SN-38, which probably provides partial explanation for the altered plasma pharmacokinetics of CPT-11 and SN-38 and the antagonizing effects on the toxicities of CPT-11. Further studies are needed to explore the role of both pharmacokinetic and pharmacodynamic components in the protective effect of SJW against the toxicities of CPT-11.

Effect of process variables on formation of dynamic strain induced ultrafine ferrite during hot torsion testing

Ultrafine grain sizes were produced using hot torsion testing of a 0.11C-1.68Mn-0.20Si (wt-%) steel, with ultrafine ferrite (<1 µm) nucleating intragranularly during testing by dynamic strain induced transformation. A systematic study was made of the effect of isothermal deformation temperature, strain level, strain rate, and accelerated cooling during deformation on the formation of ultrafine ferrite by this process. Decreasing the isothermal testing temperature below the Ae₃ temperature led to a greater driving force for ferrite nucleation and thus more extensive nucleation during testing; the formation of Widmanstätten ferrite prior to, or early during, deformation imposed a lower temperature limit. Increasing the strain above that where ferrite first began 0.8 at 675C and a strain rate of 3 s¯¹ increased the intragranular nucleation of ferrite. Strain rate appeared to have little effect on the amount of ferrite formed. However, slower strain rates led to extensive polygonisation of the ferrite formed because more time was available for ferrite recovery. Accelerated cooling during deformation followed by air cooling to room temperature led to a uniform microstructure consisting of very fine ferrite grains and fine spherical carbides located in the grain boundaries regions. Air cooling after isothermal testing led to carbide bands and a larger ferrite grain size.

Ethical, economic and efficient sector : is it a gamble? The case of New Zealand Health

The New Zealand public sector has gone through major reform as a result of fiscal deficit in 1984 (KettI, 1997; Schwartz, 1997), resulting in shift of emphasis from quality service provision to establishing financial supremacy (Kettl, 1997). This raises concern as to how public sector employees are attaining balance between their service objectives with financial ones and how is the ethics negotiated in this process. Following this concern, this paper focuses on determining the organisational variables consisting of organisational policies in the District Health Boards (DHBs) and hospitals of New Zealand on ethical behaviours of managers and the ethical climate of these departments. The aim of this study is to increase our understanding of the ethical climate of the public health. Our findings suggest that little emphasis has been provided to the aspect of ethics in New Zealand health sector. There is no reward for employees who exhibit exemplary ethical behaviour, no hot line to consult/report about ethics, any detailed guidelines and policies, and not enough ethics-related training provided to staff.