Fluorescent photoinduced electron transfer (PET) sensors for anions; from design to potential application

This mini review highlights the synthesis and photophysical evaluation of anion sensors, for nonaqueous solutions, that have been developed in our laboratories over the last few years. We have focused our research mainly on developing fluorescent photoinduced electron transfer (PET) sensors based on the fluorophore-spacer-anion receptor principle using several anthracene (emitting in the blue) and 1,8-naphthalimide (emitting in the green) fluorophores, with the aim of targeting biologically and industrially relevant anions such as acetates, phosphate and amino acids, as well as halides such as fluoride. The receptors and the fluorophore are separated by a short methyl or ethyl spacer, where the charge neutral anion receptors are either aliphatic or aromatic urea (or thiourea) moieties. For these, the anion recognition is through hydrogen bonding, yielding anion:receptor complexes. Such bonding gives rise to enhanced reduction potential in the receptor moieties which causes enhancement in the rate of PET quenching of the fluorophore excited state from the anion:receptor moiety. This design can be further elaborated on by incorporating either two fluorophores, or urea/thiourea receptors into the sensor structures, using anthracene as a fluorophore. For the latter design, the sensors were designed to achieve sensing of bis-anions, such as di-carboxylates or pyrophosphate, where the anion bridged the anthracene moiety. In the case of the naphthalimide based mono-receptor based PET sensors, it was discovered that in DMSO the sensors were also susceptible to deprotonation by anions such as F− at high concentrations. This led to substantial changes in the absorption spectra of these sensors, where the solution changed colour from yellow/green to deep blue, which was clearly visible to the naked eye. Hence, some of the examples presented can act as dual fluorescent-colorimetric sensors for anions. Further investigations into this phenomenon led to the development of simple colorimetric sensors for fluorides, which upon exposure to air, were shown to fix carbon dioxide as bicarbonate.

The first dimeric trioganotin fluoride : stabilization by unsymmetrically oriented menthyl substituents

In the solid state, (-)-tris([1R,2S,5R]-menthyl)tin fluoride, Men₃SnF (6), exhibits a dimeric structure in which one tin atom is four-coordinate and the other five-coordinate. This novel dimeric association mode is attributed to the orientation of the unsymmetrical menthyl groups, which are arranged to allow a minimum Sn···Sn separation of 4.84 Å within the dimer. The exocyclic isopropyl groups of the menthyl groups point in opposite directions on each tin atom of the dimer, thus preventing further association (Sn···Sn separation outside the dimer 10.49 Å). ¹¹⁹Sn and ¹⁹F MAS NMR spectroscopy were utilized to probe the diverse coordination numbers found by X-ray crystallography for the geometries of the two tin and fluorine sites. In solution, 6 is a monomer at both room temperature and -100 °C. However, upon addition of Bu₄NF, 6 is in equilibrium with [(Men₃SnF)₂F]- (6a), [Men₃SnF₂]^- (6b), and noncoordinating fluoride anions.

Fluoride-assisted synthesis of mullite (Al5.65 Si0.35 O9.175) nanowires

Novel silicon-deficient mullite (Al_5.65Si_0.35O_9.175) single crystal nanowires were synthesized in large quantities on mica substrates assisted by the intermediate fluoride species. The nanowires have diameters in the range 50–100 nm and typical lengths of several µm. Aligned nanowires were observed at the substrate edge. The nanowires have strong photoluminescence (PL) emission bands at 310, 397, 452 and 468 nm.

Absorption and desorption characteristics of fluoride in the calcareous and siliceous sand sheet aquifers of south-west Victoria, Australia

This study assessed the sustainability of utilising groundwater systems to
manage an aluminium smelter's fluoridated trade wastewater stream. Replacing ocean discharge of the wastewater with land irrigation is one option. Using a groundwater model (developed using MODFLOW incorporating parameter estimation software (PEST-ASP)), we found that most of the groundwater flow takes place through surface sands. Fluoride is adsorbed in these sands during the drier summer months, but desorption is rapid when winter rain flushes the aquifer. Underlying clays and other layers prevent significant contamination of the deeper aquifer.

Microstructures and bond strengths of the calcium phosphate coatings formed on titanium from different simulated body fluids

Calcium phosphate (Ca-P) coatings were deposited on Ti substrates by a biomimetic method from m-SBF and 10× SBF, respectively. Comparative study of microstructures and bond strengths of the Ca-P coatings deposited from those different SBFs was carried out. Effect of the surface roughness of the substrates on the bond strength of the Ca-P coatings was also studied. Scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transformed infrared spectroscopy (FTIR), inductive coupled plasma spectrometry (ICP) and thermogravimetry (TG) were used to characterize the Ca-P coatings. The bond strengths between the coatings and Ti substrates were measured using an adhesive strength test. Results indicated that the ionic concentrations of the SBFs and the surface roughness of the substrate had a significant influence on the formation, morphology and bond strength of the Ca-P precipitates. The induction period of time to deposit a complete Ca-P layer from the m-SBF is much longer, but the Ca-P coating is denser and has higher bond strength than that formed from the 10× SBF. The Ti with a surface roughness of R_a 0.64 µm and R_z 2.81 µm favoures the formation of a compact Ca-P coating from the m-SBF with the highest bond strength of approximately 15.5 MPa.

Aluminium smelter wastewater : groundwater fluoride fate

This study assessed the viability of utilising groundwater systems to manage Portland Aluminium's trade waste water stream. A mathematical groundwater model was created to assess laboratory and field results. Fluoride was modelled for spatio-temporal longevity in the system. All models indicate that fluoride will ultimately exit the site to the seaward boundary.

Simultaneous removal of ammonia and phosphate from wastewater by precipitation of struvite using magnesia

A thorough investigation of conditions required for the precipitation of magnesium ammonium phosphate hexahydrate using magnesia as the source of magnesium was carried out and two computer models were used to make predictions as to optimum conditions for production of suitable crystal size and structure for a successful process. A process was developed and a bench scale model operated for a number of high ammonia wastes. Removal of ammonia was affected to levels of up to 97% with 94% ammonia removal being achievable consistently.