Plasticized single conductung polyelectrolytes based on poly (AMPS)

Poly(2-acrylamido-2-methyl-propane-1-sulphonic acid), poly(AMPS), has been ion exchanged with lithium and sodium to form alkali metal ion conducting polyelectrolytes. In the pure form these materials are rigid and would thus show limited conductivity. However addition of water or dimethylsulphoxide, as plasticizers, increases the conductivity by several orders or magnitude. The thermal analysis and NMR relaxation studies of these systems suggest that the increase in conductivity is as a direct result of increased ion mobility although the FTIR evidence still suggests significant ion association consistent with weak electrolytes. Although the Tg's of the sodium form of the polymer were higher, this system displayed higher conductivities than lithium which can be explained by a greater degree of ion dissociation and hence a larger number of charge carriers in the case of sodium poly(AMPS).

Processes of task performance as measured by the assessment of motor and process skills (AMPS): a predictor of work-related outcomes for adults with schizophrenia?

Objective: To determine whether the processes of task performance as measured by the Assessment of Motor and Process Skills (AMPS) would discriminate between the employment levels of adults with schizophrenia. Participants: Twenty adults with schizophrenia who were engaged either in competitive employment, supported employment, prevocational training, or nonvocational activities, participated in this exploratory study. Methods: Each participant completed the AMPS, the Positive and Negative Syndrome Scale (PANSS), the Addiction Severity Index (ASI), and theWorker Role Interview (WRI) to gather data about their occupational performance, symptoms, drug / alcohol use, and psychosocial / environmental factors that might influence their work related outcomes. Results: Analysis revealed a moderate correlation between the level of employment and the global scores of the process skills scale in the AMPS. Conclusions: This should be seen as preliminary evidence that beyond the basic cognitive functions, processes of task performance may also be a predictor of work related outcomes for this population. The results also highlighted the importance of considering personal causation and worker roles when assessing the work capacities of these clients. Finally, findings supported the four levels of employment used in this study, which appeared to form a continuum from nonvocational activities, prevocational training, supported employment, through to competitive employment.

The enhancement of lithium ion dissociation in polyelectrolyte gels on the addition of ceramic nano-fillers

Nano-particle oxide fillers including TiO₂, SiO₂ and Al₂O₃ have previously been shown to have a significant affect on the properties of both polymer and polymer gel electrolytes. In some cases, conductivity increases of one order of magnitude have been reported in crystalline PEO–base complexes. In this work, we report the effects of TiO₂ and SiO₂ on a poly(Li-AMPS)-based gel polyelectrolyte. Impedance spectroscopy and pfg-NMR spectroscopy indicates an increase in the number of available charge carriers with the addition of filler. An ideal amount of ceramic filler has been identified, with additional filler only saturating the system and reducing the conductivity below that of the pristine polyelectrolyte system. SEM micrographs suggest a model whereby the filler interacts readily with the sulfonate group; the surface area of the filler being an important factor.

The additive effect of zwitterion and nano-particles on ion dissociation in polyelectrolytes

To realise the battery potential of gel polyelectrolytes greater ion dissociation, ultimately leading to higher conductivities, must be achieved. Higher conductivities will result through increasing the ion-dissociating properties of the gel polyelectrolyte. The poor degree of ion dissociation arises as the active ion tends to remain in close proximity to the backbone charge. Nano-particle inorganic oxides, and zwitterionic compounds have been shown to act as dissociation enhancers in certain polyelectrolyte systems. In an attempt to further increase ion dissociation the addition of both TiO₂ nano-particles and a zwitterionic compound based on 1-butylimidazolium-3-N-(butanesulphonate) were added to the gel polyelectrolyte system poly (Li-2-acrylamido-2-methyl-1-propane sulphonate-co-N,N′-dimethylacrylamide), poly(Li-AMPS-co-DMAA) to determine if a synergistic effect occurs. Two different solvents were used to determine the breadth of applicability of the additive effect. The use of both dissociators resulted in the maximum ionic conductivity being achieved at lower nano-particle concentrations when compared to an identical system without zwitterion.

Water-soluble acrylamide sulfonate copolymer for inhibiting shale hydration

Here we report a water-soluble acrylamide sulfonate copolymer for inhibiting shale hydrate formation. The copolymer, denoted as PANAA, was synthesized via copolymerization of acrylamide (AM), N,N-diallylbenzylamine (NAPA), acrylic acid (AA), and 2-(acrylamide)-2-methylpropane-1-sulfonic acid (AMPS). The performance of this new water-soluble copolymer for inhibiting shale hydration was investigated for the first time. The retention ratio of apparent viscosity of 2 wt % PANAA solution can reach 61.6% at 130 C and further up to 72.2% with 12 000 mg/L NaCl brine. The X-ray diffraction studies show that the addition of copolymer PANAA (5000 mg/L), in combination with a low loading of KCl (3 wt %), remarkably reduces the interlayer spacing of sodium montmorillonite (Na-MMT) in water from 19.04 to 15.65 Å. It has also found that these copolymer solutions, blending with KCl, can improve the retention of indentation hardness from 22% to 74% and increase the antiswelling ratio up to 84%. All results have demonstrated that the PANAA copolymer not only has excellent temperature-resistance and salt-tolerance but also exhibits a significant effect on inhibiting the hydration of clays and shale. © 2014 American Chemical Society.

Thermally stable imidazoline-based sulfonate copolymers for enhanced oil recover

Novel imidazoline-based sulfonate copolymers (noted PAMDSCM and PAMPSCM) were successfully prepared by copolymerization of acrylamide (AM), acrylic acid (AA), 1-acrylamido ethyl-2-oleic imidazoline (ACEIM) with the sodium salts of 3-(diallyl-amino)-2-hydroxypropyl (NDS) or 2-acrylamido-2-methylpropane sulfonic acid (AMPS), respectively. The copolymers were characterized by infrared (IR) spectroscopy, 1H nuclear magnetic resonance (1H NMR) spectroscopy, pyrene fluorescence probe spectroscopy, viscosimetry and thermogravimetry (TG). Both PAMDSCM and PAMPSCM copolymers had excellent high-temperature tolerance in comparison with the same concentration of HPAM, and the residual viscosities were 32.0 mPa s and 31.3 mPa s (viscosity retention rates were 38.8% and 37.1%) at 140 °C, respectively. The copolymers possessed superior long-term thermal stability and their residual viscosity rates were up to 81.8% and 63.8% (52.9 mPa s and 47.1 mPa s) lasting 1.5 hours at 100 °C and 170 s-1, respectively.

Molecular dynamics study of a dual-cation ionomer electrolyte

The poly(N1222)xLi1-x[AMPS] ionomer system with dual cations has previously shown decoupled Li ion dynamics from polymer segmental motions, characterized by the glass transition temperature, which can result in a conductive electrolyte material whilst retaining an appropriate modulus (ie. stiffness) so that it can suppress dendrite formation, thereby improving safety when used in lithium metal batteries. To understand this ion dynamics behavior, molecular dynamics techniques have been used in this work to simulate structure and dynamics in these materials. These simulations confirm that the Li ion transport is decoupled from the polymer particularly at intermediate N1222+ concentrations. At 50 mol% N1222+ concentration the polymer backbone is more rigid than for higher N1222+ concentrations, but with increasing temperature Li ion transport is more significant than polymer or quaternary ammonium cation motions. Here we suggest an ion hopping mechanism for Li+, arising from structural rearrangement of ionic clusters that could explain its decoupled behavior. Higher temperatures favor an aggregated ionic structure as well as enhancing these hopping motions. The simulations discussed here provide an atomic-level understanding of ion dynamics that could contribute to designing an improved ionomer with fast ion transport and mechanical robustness.