Developing an integrated approach to understanding the effects of climate change and other environmental alterations at a flyway level

The environmental consequences of global climate change are predicted to have their greatest effect at high latitudes and have great potential to impact fragile tundra ecosystems. The Arctic tundra is a vast biodiversity resource and provides breeding areas for many migratory geese. Importantly, tundra ecosystems also currently act as a global carbon “sink”, buffering carbon emissions from human activities. In January 2003, a new three year project was implemented to understand and model the interrelationships between goose population dynamics, conservation, European land use/agriculture and climate change. A range of potential future climate and land-use scenarios will be applied to the models and combined with information from field experiments on grazing and climate change in the Arctic. This paper describes the content of the research programme as well as issues in relation to engaging stakeholders with the project.

Nutrition, management and other environmental influences on the quality and production of mohair and cashmere with particular reference to mediterranean and annual temperate climatic zones : a review

Goat fibre production is affected by genetic and environmental influences. Environmental influences which are the subject of this review include bio–geophysical factors (photoperiod, climate–herbage system and soil–plant trace nutrient composition), nutrition factors and management factors. Nutrition and management influences discussed include rate of stocking, supplementary feeding of energy and protein, liveweight change, parturition and management during shearing. While experimental data suggest affects of seasonal photoperiod on the growth of mohair and cashmere are large, these results may have confounded changes in temperature with photoperiod. The nutritional variation within and among years is the most important climatic factor influencing mohair and cashmere production and quality. Mohair quality and growth is affected significantly by rate of stocking and during periods of liveweight loss by supplementary feeding of either energy or protein. Strategic use of supplements, methods for rapid introduction of cereal grains, influence of dietary roughage on intake and the economics of supplementary feeding are discussed. Cashmere production of young, low producing goats does not appear to be affected by energy supplementation, but large responses to energy supplementation have been measured in more productive cashmere goat strains. The designs of these cashmere nutrition experiments are reviewed. Evidence for the hypothesis that energy-deprived cashmere goats divert nutrients preferentially to cashmere growth is reviewed. The influence and potential use of liveweight manipulation in affecting mohair and cashmere production and quality are described. Estimates of the energy requirements for the maintenance of fibre goats and the effect of pregnancy and lactation on mohair and cashmere growth are summarised. The effects and importance of management and hygiene during fibre harvesting (shearing) in producing quality fibre is emphasised. The review concludes that it is important to assess the results of scientific experiments for the total environmental content within which they were conducted. The review supports the view that scientific experiments should use control treatments appropriate to the environment under study as well as having controls relevant for other environments. In mediterranean and annual temperate environments, appropriate controls are liveweight loss and liveweight maintenance treatments. Mohair producers must graze goats at moderate rates of stocking to maximise animal welfare, but in so doing, they will produce heavier goats and coarser mohair. In mediterranean and annual temperate environments, seasonal changes in liveweight are large and influence both quality and production of mohair and cashmere. Mohair and cashmere producers can manipulate liveweight by supplementary feeding energy during dry seasons to minimise liveweight loss, but the economics of such feeding needs to be carefully examined. Strategic benefits can be obtained by enhancing the growth of young does prior to mating and for higher producing cashmere goats.

Environmental initiatives: towards triple-bottom line reporting

The objective of this study was to investigate the quantity and quality of voluntary environmental disclosures in the annual reports of firms listed by market capitalisation on the Australian Stock Exchange. The periods examined were those immediately prior and subsequent to the release of the Exposure Draft Coalition for Environmentally Responsible Economics (CERES) Global Reporting Initiatives (GRI) issued in March 1999. Using content analysis to focus on the environmental aspects, the study compared 425 annual reports over a two-year period and 60 environmental reports, in order to explore reporting practices in the periods surrounding this intervention. The results suggest a trend to triple-bottom reporting, and a significant change in the quality and quantity of environmental information, albeit in specific categories.

Environmental reporting initiatives: towards triple-bottom line reporting or the intergration of financial and environmental performance

This objective of this study was to investigate the quantity and quality of voluntary environmental disclosures in the annual reports of the top 500 firms listed by market capitalisation on the Australian Stock Exchange. The periods examined were those immediately prior and subsequent to the release of the Exposure Draft Coalition for Environmentally Responsible Economics (CERES) Global Reporting Initiatives(GRI) issued in March 1999. Using content analysis to focus on the environmental aspects, and drawing heavily on the research of Gamble et al (1995), the study compared 425 annual reports over a two year period and 60 environmental reports, in order to explore reporting practices in the periods surrounding this intervention. The results suggest a trend to triple bottom reporting, and a significant change in the quality and quantity of environmental information, albeit in specific categories.

Making long-term economic growth more sustainable: evaluating the costs and benefits

Currently, traditional development issues such as economic stagnation, poverty, hunger, and illness as well as newer challenges like environmental degradation and globalisation demand attention. Sustainable development, including its economic, environmental and social elements, is a key goal of decisionmakers. Optimal economic growth has also been a crucial goal of both development theorists and practitioners. This paper examines the conditions under which optimal growth might be sustainable, by assessing the costs and benefits of growth. Key environmental and social aspects are considered. The Ecol-Opt-Growth-1 model analyses economic–ecological interactions, including resource depletion, pollution, irreversibility, other environmental effects, and uncertainty. It addresses some important issues, including savings, investment, technical progress, substitutability of productive factors, intergenerational efficiency, equity, and policies to make economic growth more sustainable—a basic element of the sustainomics framework. The empirical results support growing concerns that costs of growth may outweigh its benefits, resulting in unsustainability. Basically, in a wide range of circumstances, long term economic growth is unsustainable due to increasing environmental damage. Nevertheless, the model has many options that can be explored by policy makers, to make the development path more sustainable, as advocated by sustainomics. One example suggests that government supported abatement programs are needed to move towards sustainable development, since the model runs without abatement were infeasible. The optimal rate of abatement increases over time. Abatement of pollution is necessary to improve ecosystem viability and increase sustainability. Further research is necessary to seek conditions under which alternative economic growth paths are likely to become sustainable.

Investigating social marketing, benchmarking and public policy development in environmental management

This paper discusses, an application of social marketing relating to pro-environmental awareness and social change. The integration of consumer behaviour theory into social marketing has been highlighted in the literature as requiring greater attention. Social marketing campaigns, like all marketing activities, rely on an understanding of stakeholders' attitudes and motivations in regard to the issue of concern, as well as towards the desired modified behaviour or lack of behaviour. The study highlights the marketing paradigms of benchmarking and social marketing in a not for profit governmental environment. Serrated Tussock has been designated as a weed of national significance and therefore the program has national implications (Thorp 2000). Even though issues associated with introduced species are less publicised than other environmental issues on the world stage, the associated environmental problems are no less severe than those caused by production and consumption activities. Weed control is a widespread problem facing individuals, communities and governments at all levels. A triangulatory approach, involving three distinct phases and incorporating both qualitative and quantitative tools, was used for the research design. The qualitative phase involved focus groups and in depth interviews with landholders, focus groups with professionals in the field and a focus group of key stakeholders. The mail survey resulted in a representative sample of 608 usable responses from the infestation area. The research conducted in this study illustrates how the various stages in the social marketing process were achieved and recommendations consistent with social marketing theory were generated.

Modified life cycle inventory of aluminium die casting

Aluminium die casting is a process used to transform molten aluminium material into automotive gearbox housings, wheels and electronic components, among many other uses. It is used because it is a very efficient method of achieving near net shape with the required mechanical properties. Life Cycle Assessment (LCA) is a technique used to determine the environmental impacts of a product or process. The Life Cycle Inventory (LCI) is the initial phase of an LCA and describes which emissions will occur and which raw materials are used during the life of a product or during a process. This study has improved the LCI technique by adding in manufacturing and other costs to the ISO standardised methods. Although this is not new, the novel application and allocation methods have been developed independently. The improved technique has then been applied to Aluminium High Pressure Die Casting. In applying the improved LCI to this process, the cost in monetary terms and environmental emissions have been determined for a particular component manufactured by this process. A model has been developed in association with an industry partner so this technique can be repeatedly applied and used in the prediction of costs and emissions. This has been tested with two different products. Following this, specialised LCA software modelling of the aluminium high pressure die casting process was conducted. The variations in the process have shown that each particular component will have different costs and emissions and it is not possible to generalise the process by modelling only one component. This study has concentrated on one process within die casting but the techniques developed can be used across any variations in the die casting process.

Using input-output data in life cycle inventory analysis

The impacts on the environment from human activities are of increasing concern. The need to consider the reduction in energy consumption is of particular interest, especially in the construction and operation of buildings, which accounts for between 30 and 40% of Australia's national energy consumption. Much past and more recent emphasis has been placed on methods for reducing the energy consumed in the operation of buildings. With the energy embodied in these buildings having been shown to account for an equally large proportion of a building's life cycle energy consumption, there is a need to look at ways of reducing the embodied energy of buildings and related products. Life cycle assessment (LCA) is considered to be the most appropriate tool for assessing the life cycle energy consumption of buildings and their products. The life cycle inventory analysis (LCIA) step of a LCA, where an inventory of material and energy inputs is gathered, may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and LCIA methods. These traditional methods of LCIA include process-based and input-output-based LCIA. Process-based LCIA uses process specific data, whilst input-output-based LCIA uses data produced from an analysis of the flow of goods and services between sectors of the Australian economy, also known as input-output data. With the incompleteness and unreliability of these two respective methods in mind, hybrid LCIA methods have been developed to minimise the errors associated with traditional LCIA methods, combining both process and input-output data. Hybrid LCIA methods based on process data have shown to be incomplete. Hybrid LCIA methods based on input-output data involve substituting available process data into the input-output model minimising the errors associated with process-based hybrid LCIA methods. However, until now, this LCIA method had not been tested for its level of completeness and reliability. The aim of this study was to assess the reliability and completeness of hybrid life cycle inventory analysis, as applied to the Australian construction industry. A range of case studies were selected in order to apply the input-output-based hybrid LCIA method and evaluate the subsequent results as obtained from each case study. These case studies included buildings: two commercial office buildings, two residential buildings, a recreational building; and building related products: a solar hot water system, a building integrated photovoltaic system and a washing machine. The range of building types and products selected assisted in testing the input-output-based hybrid LCIA method for its applicability across a wide range of product types. The input-output-based hybrid LCIA method was applied to each of the selected case studies in order to obtain their respective embodied energy results. These results were then evaluated with the use of a number of evaluation methods. These evaluation methods included an analysis of the difference between the process-based and input-output-based hybrid LCIA results as an evaluation of the completeness of the process-based LCIA method. The second method of evaluation used was a comparison between equivalent process and input-output values used in the input-output-based hybrid LCIA method as a measure of reliability. It was found that the results from a typical process-based LCIA and process-based hybrid LCIA have a large gap when compared to input-output-based hybrid LCIA results (up to 80%). This gap has shown that the currently available quantity of process data in Australia is insufficient. The comparison between equivalent process-based and input-output-based LCIA values showed that the input-output data does not provide a reliable representation of the equivalent process values, for material energy intensities, material inputs and whole products. Therefore, the use of input-output data to account for inadequate or missing process data is not reliable. However, as there is currently no other method for filling the gaps in traditional process-based LCIA, and as input-output data is considered to be more complete than process data, and the errors may be somewhat lower, using input-output data to fill the gaps in traditional process-based LCIA appears to be better than not using any data at all. The input-output-based hybrid LCIA method evaluated in this study has shown to be the most sophisticated and complete currently available LCIA method for assessing the environmental impacts associated with buildings and building related products. This finding is significant as the construction and operation of buildings accounts for a large proportion of national energy consumption. The use of the input-output-based hybrid LCIA method for products other than those related to the Australian construction industry may be appropriate, especially if the material inputs of the product being assessed are similar to those typically used in the construction industry. The input-output-based hybrid LCIA method has been used to correct some of the errors and limitations associated with previous LCIA methods, without the introduction of any new errors. Improvements in current input-output models are also needed, particularly to account for the inclusion of capital equipment inputs (i.e. the energy required to manufacture the machinery and other equipment used in the production of building materials, products etc.). Although further improvements in the quantity of currently available process data are also needed, this study has shown that with the current available embodied energy data for LCIA, the input-output-based hybrid LCIA appears to provide the most reliable and complete method for use in assessing the environmental impacts of the Australian construction industry.

Environmental site assessment for abalone ranching on artificial reef

This study investigated the feasibility of ranching the abalone Haliotis rubra (Leach) and Haliotis laevigata (Donovan) on concrete artificial reefs at a site chosen by industry investors on silty bottom off Altona Beach, Port Phillip Bay, Victoria, Australia. The study started from the premise that artificial reef deployment combined with abalone stock enhancement may achieve the dual purpose of habitat and stock improvement. It evaluated the hydrodynamics of the site in relation to artificial reef structural stability and drift algal transport, the development and ecology of the artificial reef assemblage, and abalone enhancement by seeding the reefs with hatchery juvenile abalone and transplanting adult broodstock abalone. Despite a scarcity of reports on culturing abalone on artificial reef, a literature review examined broadly the functions of artificial reefs, particularly in the context of abalone enhancement, and the relationship between artificial reefs, hydrodynamics and ecology. The major finding was that the success of artificial reef projects is highly dependent on the environment of the chosen site, and that preliminary studies are essential to predict their likely success. This consideration alone provided strong justification to undertake this study. The topography at the Altona site was generally flat, with natural patches of low basalt boulder reef, offering low habitat complexity, yet supporting a diverse range of flora and fauna, including a low-density wild stock of H. rubra. Water depth was a mean of 3.3 m at low tide and 4.4 m at high tide. A single, uncomplicated, concrete artificial reef of H-shape design, was tested as abalone habitat. The hydrodynamic analysis confirmed previous studies of Port Phillip Bay, with mild current speeds of mean 0.045 m.s-1, and maximum-modelled wave height (H1/3) of 1.21 m and period (T1/3) of 4.51 sec. Water temperature ranged from 9.9şC during July to 23.8şC during January, with salinity averaging of 35.5 ppt. The site had a low probability of receiving drift algae, necessary as a food source for abalone, because of its geographic location, potentially affecting ranch productivity. Ecological monitoring of the three-year old artificial reef shows complex changes in the flora and fauna over time, particularly in respect of the sessile fauna. Key differences between the artificial reef and a nearby natural reef community were: lower cover of corallines and late colonisers, such as sponges. High levels of sedimentation were recorded at the Altona site. Hatchery juvenile H. laevigata, with mean survival of 15% after two years and a mean annual growth rate of 39 mm, showed the most promise for outplanting. In comparison, for hatchery juvenile H. rubra, mean survival was 9% after three years and mean annual growth rate was 22 mm. No natural recruitment of H. laevigata was recorded on artificial reef despite transplants of adult broodstock on the reefs. Natural recruitment of H. rubra was also low and insufficient to reliably contribute to abalone ranch stock. Having examined the hydrodynamic, ecological and enhancement attributes of the Altona site, the study concluded that the site was marginally viable for abalone ranching, and that an alternative site near Werribee, 20 km further southwest, had superior attributes for growth and survival of abalone.

Nutrient contribution to hyper-eutrophic wetlands in Perth, Western Australia

This thesis investigates nutrient contribution to six hyper-eutrophic lakes located within close proximity of each other on the Swan Coastal Plain and 20 kilometres south of the Perth Central Business District, Western Australia. The lakes are located within a mixed land use setting and are under the management of a number of state and local government departments and organisations. These are a number of other lakes on the Swan Coastal Plain for which the majority are less than 3 metres in depth and considered as an expression of the groundwater as their base is below the regional groundwater table throughout most of the year. The limited amount of water quality data available for these six lakes and the surface water and groundwater flowing into them has restricted a thorough understanding of the processes influencing the water quality of the lakes. Various private and public companies and organisations have undertaken studies on some of the individual wetlands and there is a wide difference in scientific opinion as to the major source of the nutrients to those wetlands. These previous studies failed to consider regional surface water and groundwater effects on the nutrient fluxes and they predominantly only investigated single wetland systems. This study attempts for the first time to investigate the regional contribution of nutrients to this system of wetlands existing on the Swan Coastal plain. As such, it also includes new research on the nutrient contribution to some of the remaining wetlands. The research findings indicate that the lake sediments represent a considerable store of nutrients (nitrogen and phosphorus). These sediments in turn control the nutrient status of the lake's water column. Surface water is found to contribute on an event-basis load of nutrients to the lakes whilst the groundwater surprisingly appears to contribute a comparatively low input of nutrients but governs the water depth. Analysis of the regional groundwater shows efficient denitrifying abilities as a result of denitrifying bacteria and the transport is localised. Management recommendations for the remediation of the social and environmental value of the lakes include treatment of the lake’s sediments via chemical bonding or atmospheric oxidation; utilising the regional groundwater’s denitrifying abilities to ‘treat’ the surface water via infiltration basins; and investigating the merits of managed or artificial aquifer recharge (MAR).

Adsorption and voltammetry of butyltin compounds

The adsorption of tributyltin onto materials commonly used for the construction of sampling and analytical equipment from aqueous solutions of varying ionic composition has been examined. The adsorption appears to be controlled by non-polar interactions between tributyltin and the surface involved. Since the speciation and hence polarity of tributyltin is affected by the ionic composition of the medium, the extent of adsorption is affected by the salinity and pH of a sample. The adsorption is rapid and, unless strategies are adopted to eliminate its effects, may render analytical results invalid. The electrochemistry of tributyltin, dibutyltin and monobutyltin, individually and in mixtures, has been investigated in aqueous media at mercury electrodes. The basic electrochemistry of each compound is summarised by the reaction BunSn (4-n)+ + (4-n)e- right left harpoons BunSn where n is the number of butyl groups attached to the tin atom. However, the electrochemistry of each compound is largely confined to the surface of the mercury electrode, and the simplicity of the above reaction is disrupted by polymerisation reactions and by butyl exchange processes occurring with the mercury electrode. When mixtures of butyltin compounds are present, the various processes that occur for each individual compound interfere with each other. A direct voltaminetric method for the determination of butyltin compounds in natural waters is therefore probably not possible.

Evaluation of an environmental rating tool for commercial building design

This research examined the inclusion of environmental rating tools in the design of commercial buildings. Environmental issues are becoming increasingly important for designers and the results of the study suggest that rating tools can be an asset to design teams, provided they are integrated and reinforced throughout the design process.

Recovery of estuaries following disturbance by pollutants

The recovery of a heavily polluted estuary was assessed by comparing the structure of its intertidal community with six other estuaries. Results indicated that some recovery had occurred, however improvements in the study methodology were required to further clarify the ecological status of the creek.

The combined effect of light intensity and temperature on the chlorophyll and carotenoid pigments of phytoplankton

Chlorophyll a and other photosynthetic pigments are used as indicators of phytoplankton biomass, composition and physiological state. Extraction and HPLC procedures were developed to analyse for chlorophyll and carotenoid pigments. The effect of the environment on pigment production must be quantified before the pigments can be used to accurately estimate biomass or quantitatively describe phytoplankton composition.