Suicide among male road and rail drivers in Australia: A retrospective mortality study

Objectives: This paper aims to describe the epidemiology of suicide among males employed in driving occupations (road and rail) compared to other male occupations in Australia. Methods: Suicide cases among road and rail drivers were extracted from a national dataset of occupationally coded suicide cases for the period 2001 to 2010. Suicide rates per 100 000 were calculated and standardised using the Australian standard population (2001). Incidence rate ratios (IRR) with 95% confidence intervals were calculated using Mantell Haenszel rates and compared to all employed suicide cases. Results: The majority of suicides in this occupational category occurred in truck drivers, followed by road and rail drivers. 98% of these suicides were among males; hence only males were included in further analyses. The age-standardised rate of male suicide among Road and Rail drivers over the period 2001 to 2010 was 22.6 per 100 000 (95% CI 19.2 to 25.9). The IRR of suicide in this occupational group compared to other male occupations was 1.42 (95% CI 1.26 to1.60). Conclusions: Suicide among Road and Rail drivers is higher than in the other male occupations. Suicide prevention initiatives addressing these risk factors, while also providing access to treatment for those at risk, are clearly needed.

The use of public transport in coastal Australia : modes of travel to work and greenhouse emissions

Commuting to work is one of the most important and regular routines of transportation in towns and cities. From a geographic perspective, the length of people’s commute is influenced, to some degree, by the spatial separation of their home and workplace and the transport infrastructure. The rise of car ownership in Australia from the 1950s to the present was accompanied by a considerable decrease of public transport use. Currently there is an average of 1.4 persons per car in Australia, and private cars are involved in approximately 90% of the trips, and public transportation in only 10%. Increased personal mobility has fuelled the trend of decentralised housing development, mostly without a clear planning for local employment, or alternative means of transportation. Transport sector accounts for 14% of Australia’s net greenhouse gas emissions. Without further policy action, Australia’s emissions are projected to continue to increase. The Australian Federal Government and the new Department of Climate Change have recently published a set of maps showing that rising seas would submerge large parts of Victoria coastal region. Such event would lead to major disruption in planned urban growth areas in the next 50 years with broad scale inundation of dwellings, facilities and road networks. The Greater Geelong Region has well established infrastructure as a major urban centre and tourist destination and hence attracted the attention of federal and state governments in their quest for further development and population growth. As a result of its natural beauty and ecological sensitivity, scenarios for growth in the region are currently under scrutiny from local government as well as development agencies, scientists, and planners. This paper is part of a broad research in the relationship between transportation system, urban form, trip demand, and emissions, as a paramount in addressing the challenges presented by urban growth. Progressing from previous work focused on private cars, this present paper investigates the use of public transport as a mode for commuting in the Greater Geelong Region. Using a GIS based interaction model, it characterises the current use of the existing public transportation system, and also builds a scenario of increased use of the existing public transportation system, estimating potencial reductions in CO2 emissions. This study provides an improved understanding of the extent to which choices of transport mode and travel activity patterns, affect emissions in the context of regional networks. The results indicate that emissions from commuting by public transportation are significantly lower than those from commuting by private car, and emphasise that there are opportunities for large abatment in the greenhouse emissions from the transportation sector related to efforts in increasing the use of existing public transportation system.

Stochastic models of road geometry and wind condition for vehicle energy management and control

Modeling and simulation is commonly used to improve vehicle performance, to optimize vehicle system design, and to reduce vehicle development time. Vehicle performances can be affected by environmental conditions and driver behavior factors, which are often uncertain and immeasurable. To incorporate the role of environmental conditions in the modeling and simulation of vehicle systems, both real and artificial data are used. Often, real data are unavailable or inadequate for extensive investigations. Hence, it is important to be able to construct artificial environmental data whose characteristics resemble those of the real data for modeling and simulation purposes. However, to produce credible vehicle simulation results, the simulated environment must be realistic and validated using accepted practices. This paper proposes a stochastic model that is capable of creating artificial environmental factors such as road geometry and wind conditions. In addition, road geometric design principles are employed to modify the created road data, making it consistent with the real-road geometry. Two sets of real-road geometry and wind condition data are employed to propose probability models. To justify the distribution goodness of fit, Pearson's chi-square and correlation statistics have been used. Finally, the stochastic models of road geometry and wind conditions (SMRWs) are developed to produce realistic road and wind data. SMRW can be used to predict vehicle performance, energy management, and control strategies over multiple driving cycles and to assist in developing fuel-efficient vehicles.

Do the numbers and locations of road-killed anuran carcasses accurately reflect impacts of vehicular traffic?

Road-killed animals are easy and inexpensive to survey, and may provide information about species distributions, abundances, and mortality rates. As with any sampling method, however, we need to explore methodological biases in such data. First, how does an animal's behavior (e.g., use of the center vs. periphery of the road) influence its vulnerability to vehicular traffic? Second, how rapidly do post-mortem processes (scavenging by other animals, destruction or displacement by subsequent vehicles) change the numbers and locations of roadkills? Our surveys of anurans on a highway in tropical Australia show that different anuran species are distributed in different ways across the width of the road, and that locations of live versus dead animals sometimes differ within a species. Experimental trials show that location on the road affects the probability of being hit by a vehicle, with anurans in the middle of the road begin hit 35% more often than anurans on the edges; thus, center-using species are more likely to be hit than edge-using taxa. The magnitude of post-mortem displacement and destruction by subsequent vehicles depended on anuran species and body size. The mean parallel displacement distance was 122.7 cm, and carcasses of thin-skinned species exhibited greater post-mortem destruction. Scavenging raptors removed 73% of carcasses, most within a few hours of sunrise. Removal rates were biased with respect to size and species. Overall, our studies suggest that investigators should carefully evaluate potential biases before using roadkill counts to estimate underlying animal abundances or mortality rates.

Accessibility impact of proposed Australian high speed rail

High speed rail (also commonly known as HSR) is highly regarded as one of the most significant innovation for mass passenger transportation to travellers willing to pay for reduced travel impediments (shorter travel time, convenience, safety, security, comfort, reliability, flexibility, uniqueness and attractiveness). The transport policy in Australia has until now focused primarily on private passenger car transport and air transportation to the degree that State and Federal Governments’ commitments and actions of rail-oriented mass transportation system still remains sketchy in spite of occasional political and public attentions into it. This has resulted in a limited use of passenger rail as a regional transport system. Using one of the several alternative HSR alignments proposed for the South-Eastern Coast of Australia connecting Melbourne, Canberra, Sydney and Brisbane, this study assesses the regional accessibility impacts of Australian HSR system by means of four indicators: location accessibility, economic potential accessibility, daily accessibility and commuting accessibility. These indicators are commonly used in transport geography literature and they offer different concepts of changes in regional accessibility conditions due to a long distance transport system. The results provide an understanding of differential effects on regional accessibility based on the geographical location and size of urban areas along HSR corridor.

An artificial waterway and road restrict movements and alter home ranges of endangered arboreal marsupial

Artificial linear structures can cause habitat fragmentation by restricting movements of animals and altering home ranges. The negative impacts of these linear structures, especially of those other than roads, on arboreal species have been rarely studied even though these species can be greatly affected because of their fidelity to the canopy. We studied the home ranges of an endangered arboreal marsupial, the western ringtail possum (Pseudocheirus occidentalis), with a focus on the impacts of a road and an artificial waterway on their movement. We radiotracked 18 females and 19 males along a major road and an artificial waterway near Busselton, Western Australia, for 3 years and estimated home ranges using an a-local convex hull (a-LoCoH) estimator. No possum crossed the road successfully during the monitoring period while one crossed the waterway. Males had a mean home range size of 0.31 ± 0.044 (SE) ha, almost double that of the females at 0.16 ± 0.017 ha. Possums near the waterway had larger home ranges (0.30 ± 0.048 ha) than those near the road (0.19 ± 0.027 ha), and the size increased with proximity to the waterway, probably due to the greater availability of nearby canopy connections and the lower availability of preferable foliage. These results demonstrate that both the road and waterway represent significant physical barriers to possums, and the artificial waterway influenced home ranges more severely than the road. This suggests that linear infrastructure other than roads can affect movements of strictly arboreal animals, and negative impacts of these structures need to be assessed and mitigated by reconnecting their habitat, just as those of roads.

Fixers and foreign correspondents : news production and autonomy

The television foreign correspondent's licence to roam and generate news is increasingly under threat. This paper concentrates on the micro production processes of today s correspondent as he or she goes about the job of newsgathering 'on the road', and considers the changing nature of the correspondent's autonomy. It inserts the missing character in foreign newsgathering - the locally hired fixer - and explores how this person affects the correspondent's autonomy. An analysis of interviews with 20 foreign correspondents and five fixers leads to the conclusion that the foreign correspondent is rarely the sole editorial figure on the road but is instead the main actor representing the creative interplay of a succession of fixers or 'local producers'. This deconstruction of the ways in which a correspondent builds an ad-hoc newsgathering team each time he or she lands in d new place allows for a deeper understanding of the modus operandi of reporters.

Economic linkages across commodity futures : hedging and trading implications

We investigate cross-market trading dynamics in futures contracts written on seemingly unrelated commodities that are consumed by a common industry. On the Tokyo Commodity Exchange, we find such evidence in natural rubber (NR), palladium (PA) and gasoline (GA) futures markets. The automobile industry is responsible for more than 50% of global demand for each of these commodities. VAR estimation reveals short-run cross-market interaction between NR and GA, and from NR to PA. Cross-market influence exerted by PA is felt in longer dynamics, with PA volatility (volume) affecting NR (GA) volume (volatility). Our findings are robust to lag-specification, volatility measure, and consistent with full BEKK-GARCH estimation results. Further analysis, which benchmarks against silver futures market, TOCOM index and TOPIX transportation index, confirms that our results are driven by a common industry exposure, and not a commodity market factor. A simple trading rule that incorporates short-run GA and long-run PA dynamics to predict NR return yields positive economic profit. Our study offers new insights into how commodity and equity markets relate at an industry level, and implications for multi-commodity hedging.

Ecologically sustainable noise barrier – further developments

This paper reports on the second phase of a research project aimed at the development of an environmentally friendly noise barrier for urban freeways, also known as KMAK (Krezel and McManus, 2007). The concrete barrier, which has some unique capabilities to mitigate transportation noise, is made from recycled concrete (RC) aggregate and industrial by-products such as fly ash and reclaimed water. The current developmental work expands on a research project that resulted in a two-layer (2L) concrete barrier. Two prototypes of the 2L barrier were produced, followed by extensive acoustic testing and a number of simulations where standard timber and/or concrete barriers were substituted with KMAK barrier (Krezel et al, 2004). Current research investigates a variety of architectural finishes applied to the original KMAK barrier with the aim of improving its visual appearance and also fine-tuning its acoustic performance. The new three-layer (3L) barrier optimises sound absorption in a frequency range characteristic to that of transportation noise, especially road traffic noise. Three major aspects related to the development of architectural finishes were considered; environmentally responsible materials, surface features and production methods. The light-weight material used in the architectural finish is based on ordinary Portland cement (OPC) and uses very fine fraction of RC aggregate. The manufacturing process of the 3L barrier was tested in a commercial setting and two sets of prototype barrier were cast. An innovative, cost effective method of applying pattern and perforation to the surface of architectural finish was also developed and tested. The findings of the current investigation demonstrate that there is a positive correlation between surface features, percentage of perforation as well as depth of the architectural layer and increased potential of the 3L barrier to mitigate transportation noise. On average, the addition of perforated architectural finish contributes to 20% increase in sound absorption. The preliminary results also show that the sound absorbency of the 3L barrier can be better controlled and tuned to specific noise frequency. The visual appearance has been significantly improved with the addition of the architectural finish, which makes the barrier an attractive, feasible and viable alternative to road barriers made from standard concrete or timber.

A study on look-ahead control and energy management strategies in hybrid electric vehicles

Fuel efficiency in a hybrid electric vehicle requires a fine balance between usage of combustion engine and battery power. Information about the geometry of the road and traffic ahead can have a great impact on optimized control and the power split between the main parts of a hybrid electric vehicle. This paper provides a survey on the existing methods of control and energy management emphasizing on those that consider the look-ahead road situation and trajectory information. Then it presents the future trends in the control and energy management of hybrid electric vehicles.

Gender differences in recreational and transport cycling : a cross-sectional mixed-methods comparison of cycling patterns, motivators, and constraints

Background
Gender differences in cycling are well-documented. However, most analyses of gender differences make broad comparisons, with few studies modeling male and female cycling patterns separately for recreational and transport cycling. This modeling is important, in order to improve our efforts to promote cycling to women and men in countries like Australia with low rates of transport cycling. The main aim of this study was to examine gender differences in cycling patterns and in motivators and constraints to cycling, separately for recreational and transport cycling.

Methods
Adult members of a Queensland, Australia, community bicycling organization completed an online survey about their cycling patterns; cycling purposes; and personal, social and perceived environmental motivators and constraints (47% response rate). Closed and open-end questions were completed. Using the quantitative data, multivariable linear, logistic and ordinal regression models were used to examine associations between gender and cycling patterns, motivators and constraints. The qualitative data were thematically analyzed to expand upon the quantitative findings.

Results
In this sample of 1862 bicyclists, men were more likely than women to cycle for recreation and for transport, and they cycled for longer. Most transport cycling was for commuting, with men more likely than women to commute by bicycle. Men were more likely to cycle on-road, and women off-road. However, most men and women did not prefer to cycle on-road without designed bicycle lanes, and qualitative data indicated a strong preference by men and women for bicycle-only off-road paths. Both genders reported personal factors (health and enjoyment related) as motivators for cycling, although women were more likely to agree that other personal, social and environmental factors were also motivating. The main constraints for both genders and both cycling purposes were perceived environmental factors related to traffic conditions, motorist aggression and safety. Women, however, reported more constraints, and were more likely to report as constraints other environmental factors and personal factors.

Conclusion
Differences found in men’s and women’s cycling patterns, motivators and constraints should be considered in efforts to promote cycling, particularly in efforts to increase cycling for transport.

Perceived neighborhood environmental attributes associated with adults’ transport-related walking and cycling: Findings from the USA, Australia and Belgium

Background : Active transportation has the potential to contribute considerably to overall physical activity levels in adults and is likely to be influenced by neighborhood-related built environment characteristics. Previous studies that examined the associations between built environment attributes and active transportation, focused mainly on transport-related walking and were conducted within single countries, limiting environmental variability. We investigated the direction and shape of relationships of perceived neighborhood attributes with transport-related cycling and walking in three countries; and examined whether these associations differed by country and gender.

Methods Data from the USA (Baltimore and Seattle), Australia (Adelaide) and Belgium (Ghent) were pooled. In total, 6,014 adults (20–65 years, 55.7% women) were recruited in high-/low-walkable and high-/low-income neighborhoods. All participants completed the Neighborhood Environmental Walkability Scale and the International Physical Activity Questionnaire. Generalized additive mixed models were used to estimate the strength and shape of the associations.

Results Proximity to destinations, good walking and cycling facilities, perceiving difficulties in parking near local shopping areas, and perceived aesthetics were included in a ‘cyclability’ index. This index was linearly positively related to transport-related cycling and no gender- or country-differences were observed. The ‘walkability’ index consisted of perceived residential density, land use mix access, proximity of destinations and aesthetics. A non-linear positive relationship with transport-related walking was found. This association was stronger in women than in men, and country-specific associations were identified: the strongest association was observed in Seattle, the weakest in Adelaide. In Ghent, the association weakened at higher levels of walkability.

Conclusions For cycling, consistent correlates were found in the three countries, but associations were less straightforward for transport-related walking. Moreover, the identified neighborhood environmental correlates were different for walking compared to cycling. In order to further clarify the shape of these associations and reach more specific international guidelines for developing walkable and bikeable neighborhoods, future studies should include even more countries to maximize environmental variability.

Occupational light vehicle-use: a research driven strategy to improve surveillance and inform policy

Background: Occupational light vehicles (OLV) are light passenger and loadshaped vehicles used for work. The OLV-associated injury burden is as great as that of heavy vehicle users, but has been largely ignored by occupational health and safety (OHS) regulators. Contingent employment growth has accentuated existing gaps in the policy framework between OHS and road-safety. Frequent burden shifting from OHS to road-related health systems undermines the evidence base necessary to inform policy development. Aims: To provide evidence-based recommendations for the collection of OLVuser surveillance data and to underpin OHS procedures and policies for OLVusers. Method: The literature was systematically analyzed to identify OLV-user OHS policy and practice gaps. Strategies to improve and co-ordinate surveillance systems were developed to address the identified limitations. Results: Gaps were identified in OLV-user legislation, data collection, and riskmanagement. These require strategies to improve identification of all OLV-users and to co-ordinate surveillance and OHS practice. Discussion: Contemporary reform of road and OHS, policy, provides a timely opportunity for the implementation of strategic responses to this serious road safety and occupational, public health problem.