Chemiluminescence detection of MDMA in street drug samples using tris (2,2'-bipyridine) ruthenium (III)

Tris(2,2'-bipyridine)ruthenium(II) chemiluminescence was investigated for the detection of 3,4-methylenedioxymethamphetamine (MDMA) and several related compounds in street drug samples. Optimization using flow injection analysis showed that the selectivity of the reagent can be targeted towards the detection of secondary amines by altering the pH of the reaction environment. The greater selectivity of this mode of detection, compared to UV-absorbance, reduces the probability of false positive results from interfering compounds. The detection limit for MDMA under these conditions was 0.48 μM. A HPLC method incorporating post-column tris(2,2'-bipyridine)ruthenium(II) chemiluminescence detection was applied to the determination of MDMA in five street drug samples. The results obtained were in good agreement with quantification performed using traditional UV-absorbance detection, which demonstrates the viability of this method for confirmatory analysis of drug samples. This is the first report of tris(2,2'-bipyridine)ruthenium(II) chemiluminescence for the detection of MDMA and related amphetamine derivatives.

The epidemiology of ecstasy use and harms in New South Wales, Australia

Aims:This paper examines the epidemiology of ecstasy use and harm in Australia using multiple data sources.

Design: The data included (1) Australian Customs Service 3,4-methylenedioxymethamphetamine (MDMA) detections; (2) the National Drug Strategy Household and Australian Secondary Student Alcohol and Drug Surveys; (3) data from Australia's ecstasy and Related Drugs Reporting System; (4) the number of recorded police incidents for ecstasy possession and distribution collated by the N.S.W. Bureau of Crime Statistics and Research; (5) the number of calls to the Alcohol and Drug Information Service and Family Drug Support relating to ecstasy; (6) the Alcohol and Other Drug Treatment Services National Minimum Dataset on number of treatment episodes for ecstasy, and (7) N.S.W. Division of Analytical Laboratories toxicology data on number of deaths where MDMA was detected.

Findings: Recent ecstasy use among adults in the general population has increased, whereas among secondary students it has remained low and stable. The patterns of ecstasy consumption among regular ecstasy users have changed over time. Polydrug use and use for extended periods of time (>48 h) remain common among this group. Frequent ecstasy use is associated with a range of risk behaviours and other problems, which tend to be attributed to a number of drugs along with ecstasy. Few ecstasy users present for treatment for problems related to their ecstasy consumption.

Conclusions: Messages and interventions to reduce the risks associated with polydrug use and patterns of extended periods of use are clearly warranted. These messages should be delivered outside of traditional health care settings, as few of these users are engaged with such services.

Crystal structure of (3S*,4S*)-4-hydroxy-2-(2`-methoxyethyl)-3-phenyl-3,4-dihydroisoquinol-1(2H)-one,C18H19NO3

C₁₈H₁₉N0₃, monoclinic, P12₁/n1 (No. 14), a =8.454(6) Å,
b =13.123(3) Å, c =14.698(3) Å, ß =104.85(3)^o, V =1576.2ų,
Z =4, R_gt(F) =0.062, wR_ref(F²) =0.184, T =293 K.

Order–disorder transitions in poly(3,4-ethylenedioxythiophene)

The commonly held perception that high conductivity in conducting polymers is linked to a high level of π-stacking order in the material is shown here to be of lesser importance in highly conducting poly(3,4-ethylenedioxythiophene) (PEDT), which has been prepared by chemical vapour phase polymerisation. Despite the fact that there is a highly energetic phase transition about 130 °C (110 J/g), and that this transition corresponds to a loss of the long-range π-stacking as observed in grazing angle XRD, the conductivity remains unchanged beyond the transition and only decreases by a factor of two when heating to above 200 °C. The XRD data suggest that order in two dimension remains above the phase transition measured by DSC and this order is sufficient to maintain a high level of electronic conductivity. Furthermore, as the ligand on the iron salt used in the synthesis is varied, the conductivity of the PEDT varies over two orders of magnitude. These phenomena cannot be explained by different degree of doping or crystallinity and it is proposed that the iron salt has an ordering effect during the vapour phase polymerisation.

Methyl 3-[4-(4-nitrobenzyloxy)phenyl]propanoate

The title compound, C17H17NO5, crystallizes with two molecules (A and B) in the asymmetric unit. The conformational structures of the two molecules show small but significant differences in the dihedral angles between the two aryl rings with values of 18.8 (1)_ for molecule A and 7.5 (1)_ for molecule B. In molecule A, the propanoate group is twisted out of the plane of the benzene group [Car—Car—C—C torsion angle = _44.9 (2)_], while for molecule B, this group lies closer to the plane [Car—Car—C—C torsion angle = 8.6 (3)_]. C—H_ _ _O interactions characterize the crystalpacking interactions in this compound.

Simultaneous synthesis of gold nanoparticles and conducting poly(3,4-ethylenedioxythiophene) towards optoelectronic nanocomposites

In this paper, a new method for obtaining poly(3,4-ethylenedioxythiophene) (PEDOT/PSS)/gold nanocomposites is described. In a first step, PEDOT/PSS gold nanoparticle aqueous dispersions were obtained by simultaneous chemical synthesis of PEDOT and gold nanoparticles in the presence of PSS that acts as a stabilizer. In a second step, these PEDOT/PSS gold nanoparticle dispersions were used to formulate nanocomposites by mixing the initial dispersion with commercially available PEDOT/PSS aqueous dispersion. Nanocomposite thin films, obtained by casting these dispersions, present an intimate contact between the inorganic and organic components

Robust, electro-conductive, self-healing superamphiphobic fabric prepared by one-step vapour-phase polymerisation of poly(3,4-ethylenedioxythiophene) in the presence of fluorinated decyl polyhedral oligomeric silsesquioxane and fluorinated alkyl silane

A robust, electrically conductive, superamphiphobic fabric was prepared by vapour-phase polymerisation of 3,4-ethylenedioxythiophene (EDOT) on fabric in the presence of fluorinated decyl polyhedral oligomeric silsesquioxane (FD-POSS) and a fluorinated alkyl silane (FAS). The coated fabric had contact angles of 169° and 156° respectively to water and hexadecane, and a surface resistance in the range of 0.8–1.2 kΩ o⁻¹ . The incorporation of FD-POSS and FAS into the PEDOT layer showed a very small influence on the conductivity but improved the washing and abrasion stability considerably. The coated fabric can withstand at least 500 cycles of standard laundry and 10000 cycles of abrasion without apparently changing the superamphiphobicity, while the conductivity only had a small reduction after the washing and abrasion. More interestingly, the coating had a self-healing ability to auto-repair from chemical damages to restore the liquid repellency.