In hot pursuit : fluctuating mating system and sexual selection in sand lizards

A changing climate is expected to have profound effects on many aspects of ectotherm biology. We report on a decade-long study of free-ranging sand lizards (Lacerta agilis), exposed to an increasing mean mating season temperature and with known operational sex ratios. We assessed year-to-year variation in sexual selection on body size and postcopulatory sperm competition and cryptic female choice. Higher temperature was not linked to strength of sexual selection on body mass, but operational sex ratio (more males) did increase the strength of sexual selection on body size. Elevated temperature increased mating rate and number of sires per clutch with positive effects on offspring fitness. In years when the “quality” of a female's partners was more variable (in standard errors of a male sexual ornament), clutches showed less multiple paternity. This agrees with prior laboratory trials in which females exercised stronger cryptic female choice when male quality varied more. An increased number of sires contributing to within-clutch paternity decreased the risk of having malformed offspring. Ultimately, such variation may contribute to highly dynamic and shifting selection mosaics in the wild, with potential implications for the evolutionary ecology of mating systems and population responses to rapidly changing environmental conditions.

A study on compressive anisotropy and nonassociated flow plasticity of the AZ31 Magnesium Alloy in hot rolling

Effect of anisotropy in compression is studied on hot rolling of AZ31 magnesium alloy with a three-dimensional constitutive model based on the quadratic Hill48 yield criterion and nonassociated flow rule (non-AFR). The constitutive model is characterized by compressive tests of AZ31 billets since plastic deformations of materials are mostly caused by compression during rolling processes. The characterized plasticity model is implemented into ABAQUS/Explicit as a user-defined material subroutine (VUMAT) based on semi-implicit backward Euler's method. The subroutine is employed to simulate square-bar rolling processes. The simulation results are compared with rolled specimens and those predicted by the von Mises and the Hill48 yield function under AFR. Moreover, strip rolling is also simulated for AZ31 with the Hill48 yield function under non-AFR. The strip rolling simulation demonstrates that the lateral spread generated by the non-AFR model is in good agreement with experimental data. These comparisons between simulation and experiments validate that the proposed Hill48 yield function under non-AFR provides satisfactory description of plastic deformation behavior in hot rolling for AZ31 alloys in case that the anisotropic parameters in the Hill48 yield function and the non-associated flow rule are calibrated by the compressive experimental results.

Deformation behaviour of a commercial pure titanium alloy during hot compression testing

The flow curve behaviour and microstructure evolution of commercially pure titanium (CP-Ti) through uniaxial hot compression was investigated at 850 °C and a strain rate of 0.1/s. Electron back scattered diffraction (EBSD) was employed to characterize the microstructure and crystallographic texture development for different thermomechanical conditions. The stress-strain curves of CP-Ti alloy under hot compression displayed a typical flow behaviour of metals undergoing dynamic recrystallization (DRX), which resulted in grain refinement. The critical strain for the onset of DRX was 0.13 using the double differentiation analysis technique. It was also revealed that the texture was markably altered during hot deformation. © (2014) Trans Tech Publications, Switzerland.

The development of ultrafine-grained hot rolling products using advanced thermomechanical processing

The aim of the work is development of industry guidance concerning production of ultrafine-grained (UFG) High Strength Low Alloy (HSLA) steels using strain-induced dynamic phase transformations during advanced thermomechanical processing. In the first part of the work, the effect of processing parameters on the grain refinement was studied. Based on the obtained results, a multiscale computer model was developed in the second part of the work that was subsequently used to predict the mechanical response of studied structures. As an overall outcome, a process window was established for the production of UFG steels that can be adopted in existing hot rolling mills. © 2014 Elsevier B.V.

Artificial neural network modeling of flow stress in hot rolling

In this study, an artificial neural network model is proposed to predict the flow stress variations during the hot rolling process. Optimization of the proposed neural network with respect to number of neurons within the hidden layer, different training methods and transfer functions of the neural network is performed. The results of the optimal network were compared with those of the conventional analytic method and it is shown that using an optimal neural network the mean calculated error is drastically reduced.

A comprehensive method to identify the kinetics of static recrystallization using the hot torsion test results with an inverse solution

Many difficulties exist in directly following the static recrystallization of metals, particularly during hotworking. Indirect measurement of static recrystallization has been extensively performed in the literature where, for example, the recrystallization behavior of austenite in steels has commonly been measured indirectly using the fractional softening method. This method relies on the yield stress changes during recrystallization which are physically simulated by hot torsion or compression tests. However, the inherent heterogeneity of deformation during a mechanical test leads to a non-uniform static recrystallization distribution in the test sample. This, in turn, poses a serious question concerning the reliability of the measurement since the stress calculation techniques during recrystallization are not adequately developed in the existing literature. This paper develops a computer-based method to account for heterogeneous deformation during fractional softening measurements based on the hot torsion test data. The importance of the fractional softening gradient in determining the kinetics is emphasized and deficiencies in our understanding of the basic mechanisms are highlighted. A computer-based method is introduced to generate the experimental and computational components in a cost function. The cost function is then utilized by an inverse solution to calibrate the design parameters in a static recrystallization model.

The hot working flow stress and microstructure in magnesium AZ31

The evolution of flow stress and microstructure for wrought magnesium alloy AZ31 was characterised using torsion and compression testing. Temperatures ranging between 300°C and 450°C and strain rates between 0.001s^-1 and 1s^-1, were employed. Constitutive equations were developed for the flow stress at a strain of 1.0 for torsion, and 0.6 for compression. The flow stress was found to be strongly dependent on deformation mode at low strains. This can be explained in terms of the influence of the deformation accommodating processes of prismatic slip and dynamic recrystallisation (DRX). At higher strains, when the change in flow stress with strain is lower, the flow stress was relatively insensitive to deformation mode. Optical microscopy carried out on torsion samples quenched after twisting to strains between 0.2 and 2 revealed dynamically recrystallised (DRX) grains situated on pre-existing grain boundaries. The average grain size was reduced from 22.5μm down to 7.3 μm after a strain of 2, with the initial grain size being halved after a strain of 0.5.

Too hot to move? Objectively assessed seasonal changes in Australian children's physical activity

BACKGROUND: Seasonal variations may influence children's physical activity patterns. The aim of this study was to examine how children's objectively-measured physical activity differed across seasons, and whether different seasonal patterns were observed for boys and girls. METHODS: Three hundred and twenty-six children aged 8-11 years from nine primary schools in Melbourne, Australia, participated in the study. Physical activity was measured every 15-s using hip-mounted GT3X+ ActiGraph accelerometers for seven consecutive days in the Winter (n = 249), Spring (n = 221), Summer (n = 174) and Autumn (n = 152) school terms. Time spent in moderate (MPA), vigorous (VPA) and moderate- to vigorous-intensity physical activity (MVPA) at each time point was derived using age-specific cut-points. Meteorological data (maximum temperature, precipitation, daylight hours) were obtained daily during each season. Longitudinal data were analysed using multilevel analyses, adjusted for age, sex, accelerometer wear time, number of valid days, and meteorological variables. RESULTS: Compared to Winter, children engaged in significantly less MPA (-5.0 min) and MVPA (-7.8 min) in Summer. Girls engaged in less MVPA in Spring (-18 min) and Summer (-9.2 min) and more MVPA in Autumn (9.9 min) compared to Winter. Significant changes in MPA and VPA bout frequency and duration were also observed. Significant decreases in VPA bout frequency (3.4 bouts) and duration (2.6 min) were observed for girls in Spring compared to Winter. No significant seasonal changes were observed for boys for all intensities and physical activity accumulation. CONCLUSIONS: Physical activity decreased in Summer compared to Winter, contrasting previous research that typically reports that children are most active in summer. Greater fluctuations were observed for girls' activity levels. In addition, girls' activity duration and bouts appeared to be more susceptible to seasonal changes compared to boys. The results suggest that strategies to promote physical activity may be needed in Australia during the hot summer months, particularly for girls.

Still serving hot soup? Two hundred years of a charitable food sector in Australia: a narrative review

OBJECTIVE: Despite the importance of the charitable food sector for a proportion of the Australian population, there is uncertainty about its present and future contributions to wellbeing. This paper describes its nature and examines its scope for improving health and food security. METHODS: The review, using systematic methods for public health research, identified peer-reviewed and grey literature relevant to Australian charitable food programs (2002 to 2012). RESULTS: Seventy publications met the criteria and informed this paper. The sector includes food banks, more than 3,000 community agencies and 800 school breakfast programs. It provides food for up to two million people annually. The scope extends beyond emergency food relief and includes case management, advocacy and other support. Weaknesses include a food supply that is sub-optimal, resource limitations and lack of evidence to evaluate or support their work towards food security. CONCLUSIONS: The sector supports people experiencing disadvantage and involves multiple organisations, working in a variety of settings, to provide food for up to 8% of the population. The limits on the sector's capacity to address food insecurity by itself must be acknowledged so that civil society, government and the food industry can support sufficient, nutritious and affordable food for all.

Hot topics in research: preventive neuroradiology in brain aging and cognitive decline

Preventive neuroradiology is a new concept supported by growing literature. The main rationale of preventive neuroradiology is the application of multimodal brain imaging toward early and subclinical detection of brain disease and subsequent preventive actions through identification of modifiable risk factors. An insightful example of this is in the area of age-related cognitive decline, mild cognitive impairment, and dementia with potentially modifiable risk factors such as obesity, diet, sleep, hypertension, diabetes, depression, supplementation, smoking, and physical activity. In studying this link between lifestyle and cognitive decline, brain imaging markers may be instrumental as quantitative measures or even indicators of early disease. The purpose of this article is to provide an overview of the major studies reflecting how lifestyle factors affect the brain and cognition aging. In this hot topics review, we will specifically focus on obesity and physical activity.

Constitutive analysis of hot deformation behavior of a Ti6Al4V alloy using physical based model

The effect of deformation parameters on the flow behavior of a Ti6Al4V alloy has been studied to understand the deformation mechanisms during hot compression. Cylindrical samples with partially equiaxed grains were deformed in the α+β phase region at different thermo-mechanical conditions. To develop components with tailored properties, the physically based Estrin and Mecking (EM) model for the work hardening/dynamic recovery combined with the Avrami equation for dynamic recrystallization was used to predict the flow stress at varying process conditions. The EM model revealed good predictability up to the peak strain, however, at strain rates below 0.01s^-1, a higher B value was observed due to the reduced density of dislocation tangles. In contrast, the flow softening model revealed higher value of constants a and b at high strain rates due to the reduction in the volume fraction of dynamic recrystallization and larger peak strain. The predicted flow stress using the combined EM+Avrami model revealed good agreement with the measured flow stress resulted in very low average absolute relative error value. The microstructural analysis of the samples suggests the formation of coarse equiaxed grains together with the increased β phase fraction at low strain rate leads to a higher flow softening.

The evolution of microbands and their interaction with NbC precipitates during hot deformation of a Fe-30Ni-Nb model austenitic steel

The present work has investigated the evolution of microbands (MBs) and their interaction with strain-induced NbC precipitates during uniaxial compression of a model austenitic Fe-30Ni-Nb steel at 925 °C. The (1 1 0) fibre grains, both without and with copious amounts of precipitates, contained up to large strains crystallographic MBs aligned close to the highly stressed {1 1 1} slip planes having large Schmid factors. The MBs thus maintained their crystallographic character during straining, through continuously rearranging themselves, and did not follow the macroscopically imposed rigid body rotation. During double-pass deformation, fine NbC particles formed at short inter-pass holding remained strongly pinned at small reloading strains and appeared to be dragged by rearranging MB walls. With increasing reloading strain, the fine precipitates became progressively released from the above walls. During reloading after increased holding time, the coarsened particles tended with their increased size to become increasingly detached from the MB walls already at a small strain. The precipitate-free MB wall segments rearranged during straining to maintain their crystallographic alignment, while the detached precipitates followed the sample shape change and rotated towards the compression plane. The MB wall rearrangement generally occurred through cooperative migration of the corresponding dislocation networks.

Softening behavior of Ti6Al4V alloy during hot deformation

The effect of strain rate and strain on the hot compression behavior of Ti6Al4V has been analysed to understand the microstructural evolution and restoration behavior. Cylindrical samples with partially equiaxed grains were deformed in the α+β region at different thermo-mechanical conditions. EBSD has been used to study the microstructural evolution and the flow softening mechanisms. The microstructural evolution showed a complex restoration behaviour, where both fragmentation and nucleation of new grains have been observed. The volume fraction of the equiaxed grains increased with an increase in the strain, but decreased with the strain rate. At the same time, the average grain size of the equiaxed grains decreased with an increase in both the strain and strain rate. The measured activation energy for deformation revealed a good agreement with reported values in the literature.