Science professional development for early childhood educators : some identified issues

In a small research project, using a qualitative approach we surveyed eleven pre-school teachers/coordinators asking them for information about the science experiences within their EC setting. We identified the opportunities they had for science professional development and clarified the level of their qualifications and those of a further 22 staff. In addition, we conducted four case studies to interrogate this further, and interviewed four early childhood educators asking for more detail about the science they provided and about their comfort in teaching science. The interviews revealed that although early childhood educators indicated that they provided a large number of varied experiences, often they were unsure of the science content or the science understanding. This limited their abilities to develop the activities further. Early childhood educators also indicated that whilst there was access to some science professional development, more would be welcome. The types of professional development which they felt would be most beneficial were "hands-on" play experiences - a "quick fix" approach. This presentation will discuss the findings of the research through a socio-cultural framework, noting some of the issues being raised in our discussions with the educators.

Lived experience of gay men caring for others with HIV/AIDS : living, loving and dying in the era of HIV/AIDS

This thesis explored gay male carers’ experience of caring for their partner, brother or friend who had HIV/AIDS. Through using phenomenological methodology (van Manen, 1990), the day-to-day caring experiences were uncovered. The data gathered were then analysed through a nursing ‘lens’, with the concept of stigma as an anchoring point. The dual stigmas of homophobia and AIDS phobia impacted on the daily lives of these men as they cared for their loved one. The research identified six themes. These were: 1) the relationship; 2) coping with HIV and AIDS; 3) the corporal impact of HIV/AIDS; 4) experiences of carers including the absence of others; 5) living daily with the virus: Demands of people living with HIV/AIDS (PLWHA); and 6) saying goodbye, but wanting to keep the memory alive. The caring these men undertook, for which they were frequently unprepared, was intensive and complex, but because of their commitment and love they battled on. Because of a sense of shame associated with AIDS phobia on the part of the PLWHA, the carer often had to undertake this care in isolation, without support from family, friends or home health care agencies. The carers struggled with not only the demands of day-to-day care, but also with non-acceptance from family, both of the nature of the relationship with their partner and of their homosexuality. Family members were forced, often with great difficulty, to acknowledge the close commitment the men had to each other. Recognition that one had a terminal disease, HIV/AIDS was also required. The fear of potential transmission was high among carers, friends and family members. Notably, there was an absence of blame on the part of the carer towards his partner for contracting HIV/AIDS. The physical decline and marking of the body further stigmatised the PLWHA, which added to carers’ burdens. They endeavoured to minimise the physical decline in their partner, so he could continue to pass as healthy, and attempted to make the day-to-day living as normal as possible. The methods of combating weight loss and opportunistic infections meant frequent medical appointments, complex intensive medical procedures and help with personal care, which was undertaken at home largely without support from health care staff. Carers frequently struggled also with their partner’s denial of being ill. One strategy all carers used was to escape with their partners from their everyday life in Melbourne and attempt metaphorically to leave the HIV/AIDS behind; this was a time when they could rekindle their life together as it was before HIV/AIDS came into their lives. Some carers chose to holiday without their partner, to give themselves a break from the day-to-day caring, while others planned and took holidays with their partner. The decline of the health in the PLWHA meant that family members had to recognise and accept both the nature of the relationship and the presence of the disease. This recognition and acceptance often came only when the partner was very ill, even at the point of dying. Carers and their partners discussed the potential use of euthanasia, as a means of ending the final phase of life with some dignity. One carer and his partner used euthanasia, despite its illegal status. The main concern for all carers was providing comfort and a reduction in the pain associated with HIV/AIDS for the partner. The widespread grief associated with HIV/AIDS was evident amongst these carers. All had known other gay men who had died, some carers own partner had died, or was about to die. There was an overwhelming sense of grief, which at times was repressed as a means of coping day-to-day. All carers felt it was important and necessary to remember those lost to HIV/AIDS through the various public memorials, as they did not want their partner to be just another faceless person lost to this disease. This phenomenological study of carers’ experience highlights the need for health care workers to be aware of the differing strategies that gay men use to cope with HIV/AIDS. While it may seem that the carers are coping with care of their partner, the outer façade is not always an accurate portrayal of the true situation. Health care workers should enquire as to the assistance these carers need from health care services in order to continue to care for their loved one. Such assistance can be the simple recognition of the partner and acceptance of them as part of the PLWHA’s network; this inclusion and acceptance is half the battle.

Changes in the Australian Commonwealth departmental machinery of government 1928-1982

The Commonwealth departmental machinery of government is changed by using Orders in Council to create, abolish or change the name of departments. Since 1906 governments have utilised a particular form of Order in Council, the Administrative Arrangements Order (AAO), as the means to reallocate functions between departments for administration. After 1928 successive governments from Scullin to Fraser gradually streamlined and increasingly used the formal processes for the executive to change departmental arrangements and the practical role of Parliament, in the process of change, virtually disappeared. From 1929 to 1982, 105 separate departments were brought into being, as new departments or through merger, and 91 were abolished, following the merger of their functions in one way or another with other departments. These figures exclude 6 situations where the change was simply that of name alone. Several hundred less substantial transfers of responsibilities were also made between departments. This dissertation describes, documents and analyses all these changes. The above changes can be distilled down to 79 events termed primary decisions. Measures of the magnitude of change arising from the decisions are developed with 157.25 units of change identified as occurring during the period, most being in the Whitlam and Fraser periods. The reasons for the changes were assessed and classified as occurring for reasons of policy, administrative logic or cabinet comfort. 47.2% of the units of change were attributed to policy, 34.9% to administrative logic, 17% to cabinet comfort. Further conclusions are drawn from more detailed analysis of the change and the reasons for the changes.

Simultaneous presentation of measured and calculated environmental results

Continuous measurement of internal and external environmental parameters is critical to our understanding of how buildings perform. Yet, the quantity and variety of time-series data can be quite overwhelming as well as onerous to decipher and present. In addition to this, is the fact that several of the collected data are useless in their raw format unless processed through algorithms to obtain identifiable and meaningful results.
These circumstances challenge the conventional way we present accumulated data and their processed outputs in order to get a better understanding of how and why the environmental performance occurred. It would be ideal if all of the collected and processed data could be presented in a simultaneous, yet, useful format. It is exactly the intention of this paper to suggest and present such a process as well as its format.
An example case study is provided where several parameters (air velocity, mean radiant temperature, humidity and air temperature) are measured periodically to calculate a time-series of internal comfort performance. However, external conditions of solar radiation and solar position as well as air temperature drive the interior building surface temperatures and help to explain the end result of internal comfort.
A program has been written to present the various sets of data graphically, in an integrated manner, animated as a function of time. The animation shows solar position, a cursor scanning weather data, the changing infra-red image and a representation of the resulting internal comfort performance throughout the
monitored period.

Processing of fine-grained aluminum foam by spark plasma sintering

Porous materials are now becoming attractive to researchers interested in both scientific and industrial applications due to their unique combinations of physical, mechanical, thermal, electrical and acoustic properties in conjunction with excellent energy absorption characteristics. Metallic foams allow efficient conversion of impact energy into deformation work, which has led to increasing applications in energy absorption devices. In particular, foams made of aluminum and its alloys are of special interest because they can be used as lightweight panels, for energy absorption in crash situations and sound or heat absorbing functions in the automotive industry with the aim to reduce weight to improve crashworthiness, safety and comfort.

Daylight for sustainable development of historic sites

Consideration of daylight is one of the contextual ingredients for maintaining a sustainable identity when intervening in a heritage site. Appropriate consideration of daylighting ensures not only visual and thermal comfort in the urban setting, but also contributes to the preservation of the place visual identity. The historic district of el Darb al-Asfar is undergoing a rehabilitation project that raises questions about the new ‘sparking’ look of the place. The ongoing cultural debate in old Cairo on the extent of success of the rehabilitation efforts in preserving the place identity identified a gap in literature regarding the ingredients that constitute identity in heritage settings. The paper argues that the project using new finishing materials of facades has led to changes in daylight levels in the space and hence the visual perception of the place itself. This paper aims to assess the impact of such intervention on the visual perception and the space identity. A digital model is built utilising a combination of photogrammetric and 3D digital technique. The TOWNSCOPE simulation package is used to trace the performance of direct, diffused, and reflected components of daylight within the original and recently resorted scenes. The output of the simulation exercise has been validated by empirical data. The paper concludes by suggesting a set of measures for achieving an appropriate daylight performance in heritage sites Eastern Mediterranean climatic conditions.

Reducing energy consumption of vehicle air conditioning system by an energy management system

This paper presents an energy management system to reduce the energy consumption of a vehicle when its air conditioning system is in use. The system controls the mass flow rate of the air by dynamically adjusting the blower speed and air-gates opening under various heat and loads circumstances. Simulations were conducted for a travelling vehicle operating the air conditioning system without and with the developed energy management system. The results show that the comfort temperature within the cabin room is achieved for reduced amount of energy consumption.

Using simulated patients to develop doctors' skills in facilitating bahaviour change : addressing childhood obesity

Objectives : This study aimed to describe the application, feasibility and outcomes of using simulated patients (SPs) to increase the skills of general practitioners (GPs) delivering a behavioural intervention to reduce childhood overweight and mild obesity.

Methods : Five female actors were trained as SPs. A total of 67 GPs from 46 general practices in Melbourne, Victoria, Australia, conducted two simulated consultation visits regarding healthy lifestyle family behaviour change, during which they practised their skills and received formative feedback. The GPs and SPs rated GP performance immediately after each consultation. Subsequently, 139 parents of overweight or obese 5–9-year-old children rated GP performance during real-life consultations. Other measures included child body mass index (BMI) Z-scores (at baseline and at a 9-month follow-up) and GP-reported levels of comfort and competence and the perceived value of SP visits.

Results : Simulated patient ratings, but not GP self-ratings, of GP performance predicted both parent ratings of real-life consultations (Spearman's rho 0.39 for correlation with SP rating at Visit 1) and subsequent reductions in BMI Z-scores between baseline and follow-up (Visit 1, rho − 0.45; Visit 2, rho − 0.46). GP levels of comfort and competence were maintained during and after the SP visits. A total of 95% of GPs rated simulated consultations as useful, although only 18% said they would pay for them.

Conclusions : Simulated patient assessment may predict real patient feedback and clinical outcomes, helping to identify doctors who require further training in behaviour change techniques. Randomised controlled trials may establish whether SPs actually raise skills or improve outcomes.

A correlation study of subjective sensorial evaluation and objective softness measurement of wool fabrics

Comfort is one of the most important aspects of clothing, especially for next-to-skin garments such as shirts and trousers for summer. Sensorial comfort has a strong relationship with both the mechanical and surface properties of apparel fabric. A comfortable textile material should have properties of softness, smooth surface or texture, be pleasant to touch and very flexible. When assessing fabric handle subjectively, the assessor usually strokes the fabric surface with one or several fingers and squash the fabric gently in hand. Thus, the perception of such handle includes complex parameters of compression, tactile sensation and textural effect. In this work, we attempted to use a simple technique of objectively evaluating fabric softness related properties, by measuring the force required to pull a fabric strip through a series of parallel pins (the pulling force). We also subjectively rated the fabric handle. The correlation analysis showed very good agreement between the fabric pulling force and subjective hand rating.

A review of occupant control on natural ventilation

According to IPCC (Intergovernmental Panel on Climate Change), the largest use of energy in commercial buildings is space heating in colder climates and air conditioning in hot climates. In Europe, the Directive on the energy performance of buildings EPBD (European Energy Performance of Buildings Directive) [1] provides a framework for national building performance regulations and calculation procedures. However, there are often large discrepancies between calculated and measured energy performance of buildings. One main reason is the behaviour of occupants, which is often not reflected in calculation models.

Study on the visual performance of a vernacular dwelling in Egypt

Vernacular dwelling buildings located in hot arid regions are well known for their sensitive architecture response to the region’s climatic conditions and the socio-cultural norms. The architectural value of these buildings is not only limited to their historical merit, but also to the human conscious adaptation to its context and the optimum utilisation of natural resources creating both a pleasant and a functional environment. The majority of these traditional dwellings are well recognised for their unique perforated fenestration system and courtyard arrangement that evolved to control the harsh solar, climatic conditions without compromising the quality of space and occupants’ wellbeing. However, the successful design of these features and solutions cannot be fully appreciated without understanding the nature of daylight and solar radiation in which these buildings are revealed. This paper investigates the impact of the characteristic of the dense narrow streets of medieval cities on the visual performance of a typical courtyard house in Cairo.The paper examines the daylight  behaviour of one of the well-known historic alleys and of a courtyard house in Cairo. The paper analyzes and measures the variability in the visual perception and comfort for a typical pedestrian street and the occupants of the house using a simulation modelling tool (Integrated Environmental Solutions (IES) software). The paper gives an insight into the overall visual performance of the urban fabric that shapes of the microclimate, which is an important ingredient of the overall identity of the place.

Using the psychrometric chart in building measurements

This paper centres around the presentation of multiple measured results on a psychrometric chart. The psychrometric chart was programmed in Microsoft Office Excel to accommodate measured results. It was written because existing programs appear not to cater for the researcher wishing to enter results electronically onto the chart. Furthermore, many existing charts are complex and cluttered displaying up to ten attributes, being intended for engineering design, whereas presenting the behaviour of living and working environments is focused on wet and dry bulb temperature and relative humidity. As well as results, users would also like to specify and adjust the ‘comfort zone’ (a shaded area on the chart) for different ‘adaptive’ or ‘seasonal’ conditions. The comfort zone is bounded by lines of constant heat loss from the skin, relative humidity and wet-bulb temperature. The paper presents various applications of the psychrometric chart for the analysis and reporting of research and discusses the programming of Microsoft Office Excel to generate the chart and display user data.

An empirical examination of feedback : user control and performance in a hapto-audio-visual training environment

Utilising advanced technologies, such as virtual environments (VEs), is of importance to training and education. The need to develop and effectively apply interactive, immersive 3D VEs continues to grow. As with any emerging technology, user acceptance of new software and hardware devices is often difficult to measure and guidelines to introduce and ensure adequate and correct usage of such technologies are lacking. It is therefore imperative to obtain a solid understanding of the important elements that play a role in effective learning through VEs. In particular, 3D VEs may present unusual and varied interaction and adoption considerations. The major contribution of this study is to investigate a complex set of interrelated factors in the relatively new sphere of VEs for training and education. Although many of the factors appears to be important from past research, researcher have not explicitly studied a comprehensive set of inter-dependant, empirically validated factors in order to understand how VEs aid complex procedural knowledge and motor skill learning. By integrating theory from research on training, human computer interaction (HCI), ergonomics and cognitive psychology, this research proposes and validates a model that contributes to application-specific VE efficacy formation. The findings of this study show visual feedback has a significant effect on performance. For tactile/force feedback and auditory feedback, no significant effect were found. For satisfaction, user control is salient for performance. Other factors such as interactivity and system comfort, as well as level of task difficulty, also showed effects on performance.

Market analysis study of the value technology systems to home owners

Smart Technology involves the integration of a variety of home systems including lighting, climate control, security etc. to enhance the comfort, convenience and economy of the home for its users. It is currently unknown if home buyers believe that these systems add value to the home. This study used the market value of home sales and an attitudinal survey of home buyers, to determine the increased value of homes containing Smart Technology. The results demonstrated that a significant price premium was paid by for the incorporation of the technology into new homes. In addition, the research suggests that the use of this technology is not limited to high income earners or other demographic stereotypes. Instead it has broad market appeal and the potential to save energy for the community at large.

Analysis of the value of home automation systems

Smart technology involves the integration of a variety of home systems including lighting, climate control, security etc. to enhance the comfort, convenience and economy of the home for its users. It is currently unknown if homebuyers believe that these systems add value to the home. This study used the market value of home sales and an attitudinal survey of homebuyers, to determine the increased value of homes containing smart technology. The results demonstrated that a significant price premium was paid for the incorporation of the technology into new homes. In addition, the research suggests that the use of this technology is not limited to high-income earners or other demographic stereotypes. Instead it has broad market appeal and the potential to save energy for the community at large.