Design based learning – student's views on industry requirements

The focus of this research paper is to illustrate students views on design based learning, and in particular  to investigate and present how important design based learning is for a career in engineering. Students  need to  acquire  various skills by  learning  and practicing  engineering, which  is necessary to  explore themselves according to the industry requirements. However students and educators are not aware of  existing industry requirements of graduates. In learning and teaching institutions, practicing design is  one of the fundamental processes in engineering and all other engineering activities related to it. When  students require the  opportunity to  apply their  knowledge to solve  design  problems,  design  based learning is generally recorded as an innovative method for engineering education. This paper presents  research findings from  a quantitative  analysis  of student  views on design based  learning for future  career readiness in engineering.

One-size-fits-all housing : an exploration of 6-star requirements in the volume builder sector

Energy consumption attributed to the residential sector makes up around 8% of the total consumption in Australia. Roughly a third of all houses built in Victoria are done so by the largest 20 builders. These volume builders keep costs down by offering a selection of ‘clone’ designs from which the client can choose, however they lose the site-specific customisation which is required for effective passive design in favour of a one-size-fits-all approach where designs are developed to a point where they can satisfy just the minimum requirements in a range of orientations and site locations. The Australian government has implemented regulations regarding the minimum efficiency standards for housing and these initiatives to limit the carbon emissions have brought the question of energy use to the table, yet are they enough? This paper will explore the concept of cloned house designs in terms of energy efficiency and optimal siting and through computer simulation, evaluate how a cloned house design performs under different site conditions in Victoria.

Facilitating child witness interviews' understanding of evidential requirements through prosecutor instruction

Prosecutors report that the evidential usefulness of child witness statements about abuse is often limited by unnecessary interview content and excessive length. Prior research indicates that this limitation may be attributed to a mismatch between interviewers' and prosecutors' understandings of the legal requirements of an interview. The aim of this study is to examine whether differences in the evidential qualities that are perceived as important by prosecutors and interviewers can be reduced through simple instruction. Five prosecutors and 33 interviewers completed a written exercise wherein participants were required to identify what aspects of information required follow-up in five hypothetical narrative accounts of abuse. Twenty of the interviewers had (prior to completing the exercise) received prosecutor instruction on the requirements of interviews in terms of the elements and particulars of sexual offences, and the manner in which necessary information is best elicited in an interview (from a legal perspective). The responses to the exercise of interviewers who had and had not received prosecutor instruction were compared. The results indicated that interviewers who had received instruction were more consistent with prosecutors in their responses to the exercise. The importance of these findings, and directions for future research, are discussed.

The unique inter-disciplinary requirements of a museum development : a case study of the Kelabit Highland community museum development project.

Each museum development presents complex and unique challenges. In particular, the Kelabit Highland Community Museum Development Project (KHCMDP) is a museum development that requires both discipline-specific and interdisciplinary collaboration to reach the common goal of the preservation and conservation of the fragile Kelabit heritage. Still in its infancy, however rich with potential, the engagement required to realize the development of this community-based museum, in the remote region of Bario in the Highlands of Borneo, offers a stimulating environment in which both discipline specific and creative interdisciplinary thinking are utilized to create a suitable and sustainable development. This paper will describe the process of extensive community consultation required by the interdisciplinary team of academics to address the areas of curatorial policies, preservation and conservation, the design of the built environment and the creation of the communication strategies for the project. It demonstrates the unique opportunity for diverse tertiary disciplines at Deakin University to further develop their knowledge of museology, preservation, identity creation and issues of representation and communication from an interdisciplinary perspective. Within each of the areas of concern, the interconnecting nature of the project has resulted in a strong intersection of each of the normally separate professional departments. Furthermore, adding to the complexity, this case study is a multi-disciplined research opportunity situated in a cross-cultural context.

The National Safety and Quality Health Service Standards requirements for orientation and induction within Australian healthcare: a review of the literature

Introduction: A workplace orientation program is a core requirement of the National Safety and Quality Health Service (NSQHS) Standards in Australia. This is particularly important within healthcare as patient safety and the patient experience are at risk if the healthcare workforce is not supported with an effective orientation and induction program. Aim: This study aimed to review the literature and map the requirements of the NSQHS Standards in relation to orientation and induction. Method: This study utilised online databases to search for literature pertaining to orientation and induction within healthcare. Inclusion criteria included relevance to research questions, and originating in a country with a comparative health system to Australia. Results: The search identified a total of 202 articles of potential relevance with 42 articles meeting the inclusion criteria. Articles were ranked according to hierarchy of evidence criteria for both qualitative and quantitative studies. The importance of using orientation to detail safety and quality roles, the organisations' risk management system, governance structure, operational processes and procedures was highlighted. Patient-centred care, antimicrobial stewardship, clinical handover and mechanisms for escalation of care and emergency assistance should also be covered within the orientation process. Conclusion: There is a dearth of studies in relation to orientation and induction in the healthcare literature. Orientation content is now clearly prescribed, what is lacking within healthcare is a standardised framework. Concept mapping, educational theory and adult learning methods have been shown to enhance workforce problem solving and engagement with orientation, however further research is needed to enhance practice

Teleoperation of ABB industrial robots

Purpose - The purpose of this paper is to analyse teleoperation of an ABB industrial robot with an ABB IRC5 controller. A method to improve motion smoothness and decrease latency using the existing ABB IRC5 robot controller without access to any low-level interface is proposed. Design/methodology/ approach - The proposed control algorithm includes a high-level proportional-integral-derivative controller (PID) controller used to dynamically generate reference velocities for different travel ranges of the tool centre point (TCP) of the robot. Communication with the ABB IRC5 controller was performed utilising the ABB PC software development kit. The multitasking feature of the IRC5 controller was used to enhance the communication frequency between the controller and the remote application. Trajectory tracking experiments of a pre-defined three-dimensional trajectory were carried out and the benefits of the proposed algorithm were demonstrated. The robot was intentionally installed on a wobbly table and its vibrations were recorded using a six-degrees-of-freedom force/torque sensor fitted to the tool mounting interface of the robot. The robot vibrations were used as a measure of the smoothness of the tracking movements. Findings - A communication rate of up to 250 Hz between the computer and the controller was established using C#.Net. Experimental results demonstrating the robot TCP, tracking errors and robot vibrations for different control approaches were provided and analysed. It was demonstrated that the proposed approach results in the smoothest motion with tracking errors of < 0.2 mm. Research limitations/implications - The proposed approach may be employed to produce smooth motion for a remotely operated ABB industrial robot with the existing ABB IRC5 controller. However, to achieve high-bandwidth path following, the inherent latency of the controller must be overcome, for example by utilising a low-level interface. It is particularly useful for applications including a large number of short manipulation segments, which is typical in teleoperation applications. Social implications - Using the proposed technique, off-the-shelf industrial robots can be used for research and industrial applications where remote control is required. Originality/value - Although low-level control interface for industrial robots seems to be the ideal long-term solution for teleoperation applications, the proposed remote control technique allows out-of-the-box ABB industrial robots with IRC5 controllers to achieve high efficiency and manipulation smoothness without requirements of any low-level programming interface. © Copyright - 2014 Emerald Group Publishing Limited. All rights reserved.