Zinc doped ferrite magnetic resonance imaging contrast agent for atherosclerosis

 This project focuses on the development of zinc doped ferrite nanoparticle based MRI contrast agents with enhanced contrast and site-specific targeting for atherosclerosis diagnosis. The engineered nanocomplexes developed were validated through MRI scans using rat models with potential for multimodal imaging and effective therapy.

Effect of cooling rate on phase transformations in a high-strength low-alloy steel studied from the liquid phase

The phase transformation and precipitation in a high-strength low-alloy steel have been studied over a large range of cooling rates, and a continuous cooling transformation (CCT) diagram has been produced. These experiments are unique because the measurements were made from samples cooled directly from the melt, rather than in homogenized and re-heated billets. The purpose of this experimental design was to examine conditions pertinent to direct strip casting. At the highest cooling rates which simulate strip casting, the microstructure was fully bainitic with small regions of pearlite. At lower cooling rates, the fraction of polygonal ferrite increased and the pearlite regions became larger. The CCT diagram and the microstructural analysis showed that the precipitation of NbC is suppressed at high cooling rates, and is likely to be incomplete at intermediate cooling rates.

Novel reversible and switchable electrolytes based on magneto-rheology

Replacing organic liquid electrolytes with solid electrolytes has led to a new perspective on batteries, enabling high-energy battery chemistry with intrinsically safe cell designs. However, most solid/gel electrolytes are easily deformed; under extreme deformation, leakage and/or short-circuiting can occur. Here, we report a novel magneto-rheological electrolyte (MR electrolyte) that responds to changes in an external magnetic field; the electrolyte exhibits low viscosity in the absence of a magnetic field and increased viscosity or a solid-like phase in the presence of a magnetic field. This change from a liquid to solid does not significantly change the conductivity of the MR electrolyte. This work introduces a new class of magnetically sensitive solid electrolytes that can enhance impact resistance and prevent leakage from electronic devices through reversible active switching of their mechanical properties.

Development of a resin based silica monolithic column encapsulation

As monolithic columns become more extensively used in separation based applications due to their good flow and high surface characteristics, there has arisen the need to establish simple, reliable fabrication methods for fluidic coupling and sealing. In particular, the problem of liquid tracking between a monolith's outer surface and the sealing wall, resulting in poor flow-through performance, needs to be addressed. This paper describes a novel resin-based encapsulation method that penetrates 0.3 mm into the outer surface of a 4 mm diameter monolith, removing the so-called wall-effect. Results based on the peak analysis from 1 μL of 0.4% thiourea injected into a 98:2 water:methanol mobile phase flowing at 1 mL min^-1 indicate excellent flow conservation through the monolith. A comparison of peak shape and height equivalent to a theoretical plate (HETP) data between the reported resin-based method and the previously reported heat shrink tubing encapsulation methodology, for the same batch of monoliths, suggests the resin based method offers far superior flow characteristics. In addition to the improved flow properties, the resin casting method enables standard polyether ether ketone (PEEK) fittings to be moulded and subsequently unscrewed from the device offering simple reliable fluidic coupling to be achieved.

A facile synthesis of mesoporous silica nanoparticle and its morphology manipulation by varying pH value

 Mesoporous silica nanoparticles (MSNs) with particle size of20 nm have been synthesised through the template directed method at low temperature. The pH value of the reaction solution was found to have a great impact on the morphology of the final products. The morphology of resultant MSNs were investigated through transmission electron microscope. The mesoporous structure was examined by Brunauer-Emmett-Teller and Barrett-Joyner-Halenda methods. The results suggested that the high pH value had a great effect on the morphology of the final MSNs. Higher pH value intensified the interaction between particles. The pH value less than 10 is good for the formation of nanoparticles, while at pH 12, a silica framework with heterogeneous mesopore structure can be obtained.

The formation of ultrafine ferrite through static transformation in low carbon steels

A novel approach was used to produce an ultrafine grain structure in low carbon steels with a wide range of hardenability. This included warm deformation of supercooled austenite followed by reheating in the austenite region and cooling (RHA). The ultrafine ferrite structure was independent of steel composition. However, the mechanism of ferrite refinement changed with the steel quench hardenability. In a relatively low hardenable steel, the ultrafine structure was produced through dynamic strain induced transformation, whereas the ferrite refinement was formed by static transformation in steels with high quench hardenability. The use of a model Ni-30Fe austenitic alloy revealed that the deformation temperature has a strong effect on the nature of the intragranular defects. There was a transition temperature below which the cell dislocation structure changed to laminar microbands. It appears that the extreme refinement of ferrite is due to the formation of extensive high angle intragranular defects at these low deformation temperature that then act as sites for static transformation. © 2008 World Scientific Publishing Company.

Mesoporous silica nanoparticles enhance seedling growth and photosynthesis in wheat and lupin

The application of mesoporous silica nanoparticles (MSNs) as a smart delivery system to agricultural crops is gaining attention but the release of nanoparticles into the environment may pose a potential threat to biological systems. We investigated the effects of MSNs on the growth and development of wheat and lupin plants grown under controlled conditions. We report a dramatic increase in the growth of wheat and lupin plants exposed to MSNs. We also found that, in leaves, MSNs localised to chloroplasts and that photosynthetic activity was significantly increased. In addition, absorption and cellular distribution of MSNs by the two plant species following root uptake were observed using scanning electron microscopy equipped with energy dispersive spectroscopy (SEM-EDS). Following uptake of MSNs at 500 and 1000 mg L(-1), there was enhancement of seed germination, increased plant biomass, total protein and chlorophyll content. Treatment of both species with MSNs at the highest concentration (2000 mg L(-1)) did not result in oxidative stress or cell membrane damage. These findings show that MSNs can be used as novel delivery systems in plants and that over the range of concentrations tested, MSNs do not have any negative impacts on plant growth or development.