Does dynamic vulcanization induce phase separation?

Immiscible and miscible blends of poly(vinylidene fluoride) (PVDF) and acrylic rubber (ACM) were subjected to dynamic vulcanization to investigate the effect of crosslinking on phase separation. As a result of different processability, mixing torque behavior of miscible and immiscible blends was significantly different from one another. Scanning electron microscopy (SEM) was used to investigate the morphology of the system. After dynamic vulcanization, submicron ACM droplets were observed in the samples near the binodal curve of the system under mixing conditions. Small angle X-ray scattering (SAXS) and differential scanning calorimetry (DSC) analysis were used to investigate the effect of dynamic vulcanization on the lamellar structure of the system. It was shown that for samples near the boundary of phase separation, increasing the crosslink density led to a decrease in the lamellar long period (L) as a sign of increment of crosslink density induced phase decomposition. Effects of shear rate on the final morphology of the system were investigated by changing the mixing temperature and by comparing the results of dynamic vulcanization at one phase and two phase regions.

Mixing vector construction for single channel semi-blind source separation using empirical mode decomposition

The Empirical Mode Decomposition (EMD) method is a commonly used method for solving the problem of single channel blind source separation (SCBSS) in signal processing. However, the mixing vector of SCBSS, which is the base of the EMD method, has not yet been effectively constructed. The mixing vector reflects the weights of original signal sources that form the single channel blind signal source. In this paper, we propose a novel method to construct a mixing vector for a single channel blind signal source to approximate the actual mixing vector in terms of keeping the same ratios between signal weights. The constructed mixing vector can be used to improve signal separations. Our method incorporates the adaptive filter, least square method, EMD method and signal source samples to construct the mixing vector. Experimental tests using audio signal evaluations were conducted and the results indicated that our method can improve the similar values of sources energy ratio from 0.2644 to 0.8366. This kind of recognition is very important in weak signal detection.

Image encryption based on compressed sensing and blind source separation

A novel image encryption scheme based on compressed sensing and blind source separation is proposed in this work, where there is no statistical requirement to plaintexts. In the proposed method, for encryption, the plaintexts and keys are mixed with each other using a underdetermined matrix first, and then compressed under a project matrix. As a result, it forms a difficult underdetermined blind source separation (UBSS) problem without statistical features of sources. Regarding the decryption, given the keys, a new model will be constructed, which is solvable under compressed sensing (CS) frame. Due to the usage of CS technology, the plaintexts are compressed into the data with smaller size when they are encrypted. Meanwhile, they can be decrypted from parts of the received data packets and thus allows to lose some packets. This is beneficial for the proposed encryption method to suit practical communication systems. Simulations are given to illustrate the availability and the superiority of our method.

Hybrid high internal phase emulsion (HIPE) organogels with oil separation properties

Hybrid HIPE organogels were prepared from pre-formed hybrid organogels, which were formed from a triblock ionomer and Fe3O4 nanoparticles via charge-driven assembly. Magnetic materials can be obtained from these hybrid HIPE organogels simply by removal of solvents, and these materials have been confirmed to be excellent candidates for absorption of oil from water.

Revisiting the relationship between marriage and wellbeing : does marriage quality matter?

This paper revisits the marriage and wellbeing relationship using variables reflecting marriage quality and data from the US, the UK and Germany. People in self-assessed poor marriages are fairly miserable and much less happy than unmarried people, even in the first year of marriages. However, people in self-assessed good marriages are even happier than the literature suggests. Women show greater range of responses to marriage quality than men. The effect of employment status and subjective health on happiness and the marriage effects on interpersonal trust and mental health change dramatically when marriage quality is controlled for. A strong link from happiness to marriage does not exist. However, happier people are more likely to stay single instead of being unhappily married, but less likely to stay single compared to being very happily married and happiness cannot predict staying single versus being pretty happily married.

A parametric study of a monolithic microfluidic system for on-chip biomolecular separation

A microfabricated poly(dimethylsiloxane) (PDMS) chip containing channel filled with polymer monolith has been developed for on-chip biomolecule separation. Methacrylate monolithic polymers were prepared by photo-initiated polymerization within the channel to serve as a continuous stationary phase. The monolithic polymer was functionalized with a weak anion-exchange ligand, and key parameters affecting the binding characteristics of the system were investigated. The total binding capacity was unaffected by the flow rate of the mobile phase but varied significantly with changes in ionic strength and pH of the binding buffer. The binding capacity decreased with increasing buffer ionic strength, and this is due to the limited available binding sites for protein adsorption resulting from cationic shielding effect. Similarly, the binding capacity decreased with decreasing buffer pH towards the isoelectric point of the protein. A protein mixture, BSA and ovalbumin, was used to illustrate the capacity of the methacrylate-based microfluidic chip for rapid biomolecule separation.

A superamphiphobic coating with an ammonia-triggered transition to superhydrophilic and superoleophobic for oil-water separation

Superhydrophilic and superoleophobic materials are very attractive for efficient and cost-effective oil-water separation, but also very challenging to prepare. Reported herein is a new superamphiphobic coating that turns superhydrophilic and superoleophobic upon ammonia exposure. The coating is prepared from a mixture of silica nanoparticles and heptadecafluorononanoic acid-modified TiO2 sol by a facile dip-coating method. Commonly used materials, including polyester fabric and polyurethane sponge, modified with this coating show unusual capabilities for controllable filtration of an oil-water mixture and selective removal of water from bulk oil. We anticipate that this novel coating may lead to the development of advanced oil-water separation techniques.

Separation of Doppler radar-based respiratory signatures

Respiration detection using microwave Doppler radar has attracted significant interest primarily due to its unobtrusive form of measurement. With less preparation in comparison with attaching physical sensors on the body or wearing special clothing, Doppler radar for respiration detection and monitoring is particularly useful for long-term monitoring applications such as sleep studies (i.e. sleep apnoea, SIDS). However, motion artefacts and interference from multiple sources limit the widespread use and the scope of potential applications of this technique. Utilising the recent advances in independent component analysis (ICA) and multiple antenna configuration schemes, this work investigates the feasibility of decomposing respiratory signatures into each subject from the Doppler-based measurements. Experimental results demonstrated that FastICA is capable of separating two distinct respiratory signatures from two subjects adjacent to each other even in the presence of apnoea. In each test scenario, the separated respiratory patterns correlate closely to the reference respiration strap readings. The effectiveness of FastICA in dealing with the mixed Doppler radar respiration signals confirms its applicability in healthcare applications, especially in long-term home-based monitoring as it usually involves at least two people in the same environment (i.e. two people sleeping next to each other). Further, the use of FastICA to separate involuntary movements such as the arm swing from the respiratory signatures of a single subject was explored in a multiple antenna environment. The separated respiratory signal indeed demonstrated a high correlation with the measurements made by a respiratory strap used currently in clinical settings.

Fabrication of superhydrophobic surfaces by smoke deposition and application in oil-water separation

 Utilizing the smoke emitted by discarded silicone combustion, a simple method of smoke deposition is presented for fabricating a superhydrophobic surface with outstanding water repellence, which exhibited a water contact angle of 164 ± 0.8° and a sliding angle of lower than 1°. In addition, the as-prepared surface possesses favourable heat, water impact and water immersion stabilities. Oil leakages seriously endanger both the environment and the social economy. By this simple smoke deposition method, a selective-wettability copper mesh has been fabricated to separate oil-water mixtures. The smoke-deposited mesh achieved a high separation efficiency of over 93% for various oils, and showed excellent reusability, maintaining a high separation efficiency over 10 cycles. The water repellence of the used mesh can be refreshed by recoating with silicone and smoke deposition. This work provides a new strategy to utilize discarded silicone to fabricate superhydrophobic surfaces and oil-water separation meshes.

On laughter and loss. Children's experiences of shared time, parenting and security post-separation

Among the research, practice and socio-legal commentary on the substantial sharing of parenting time after separation, children’s voices about their experiences remain overwhelmingly silent. This article draws on findings of a descriptive phenomenological study which investigated Australian school-aged (8- to 12-year-old) children’s descriptions of two binary phenomena: security and contentment in shared time arrangements, and the absence of security and contentment in shared time parenting. Specifically, this article focuses on exploring parental behaviours and interactions recognised by children as sources of security in shared time lifestyles, through happy and needy times. Central to this is the juxtaposition of the child’s experience of security and shared enjoyment with the present parent, against the absence of security emanating from unresolved longing for the ‘absent’ parent. The article provides an empirically derived formulation of children’s advice to parents about shared time parenting, with relevance for family law related parent education forums.

A convex geometry-based blind source separation method for separating nonnegative sources

This paper presents a convex geometry (CG)-based method for blind separation of nonnegative sources. First, the unaccessible source matrix is normalized to be column-sum-to-one by mapping the available observation matrix. Then, its zero-samples are found by searching the facets of the convex hull spanned by the mapped observations. Considering these zero-samples, a quadratic cost function with respect to each row of the unmixing matrix, together with a linear constraint in relation to the involved variables, is proposed. Upon which, an algorithm is presented to estimate the unmixing matrix by solving a classical convex optimization problem. Unlike the traditional blind source separation (BSS) methods, the CG-based method does not require the independence assumption, nor the uncorrelation assumption. Compared with the BSS methods that are specifically designed to distinguish between nonnegative sources, the proposed method requires a weaker sparsity condition. Provided simulation results illustrate the performance of our method.