The allometric relationship between mean fibre diameter of mohair and the fleece-free liveweight of Angora goats over their lifetime

As mean fibre diameter (MFD) is the primary determinant of mohair price we aimed to quantify the lifetime changes in mohair MFDas Angora goats aged and grew. Measurements were made over 12 shearing periods on a population of Angora goats representing the current range and diversity of genetic origins including South African, Texan and interbred admixtures of these and Australian sources. Records of sire, dam, birthweight, birth parity, liveweight, fleece growth and fleece quality were taken for does and castrated males (wethers) (n = 267 animals). Fleece-free liveweights (FFL_wt) were determined for each goat at shearing time by subtracting the greasy fleece weight from the liveweight recorded immediately before shearing. A restricted maximum likelihood growth curve model was developed for relating MFD to FFL_wt, age and other measurements.Asimple way of describing the results is:MFD= k (FFL_wt)b E; where k is a parameter that can vary in a systematic way with shearing(age), breed, weaning weight, sire, dam and individual; b is a parameter that is the same for nearly the whole study; and E are independent errors from a log-normal distribution. The analysis shows that ^b = 0.34, with s.e. (^b) = 0.021. Thus, mohair MFD was allometrically related to the cube root of FFLwt over the lifetime of Angora goats. However, the allometric proportionality constant differed in a systematic way with age at shearing, genetic strain, weaning weight, sire, dam and individual. For Texan-breed goats, MFD decreased as weaning weight increased (P = 0.00016). The findings indicate that management factors that affect liveweight and weaning weight have lifetime effects on mohair fibre diameter and therefore the value of mohair and the profitability of the mohair enterprise.

Glass/carbon fibre hybrid composite laminates for structural applications in automotive vehicles

Light-weight structure is one of the keys to improve the fuel efficiency and reduce the environmental buden of transport vehicles (automotive and rail). While fibreglass composites have been increasingly used to replace steel in automotive industry, the adoption rate for carbon fibre composites which are much lighter, stronger and stiffere than glass fibre composites, remains low. The main reason is the high cost of carbon fibres. To further reduce vehicle weight without excessive cost increase, one technique is to incorporate carbon fibre reinforcement into glass fibre composites and innovative design by selectively reinforcing along the main load path. Glass/carbon woven fabrics with epoxy resin matrix were utilised for preparing hybrid composite laminates. The in-plane mechanical properties such as tensile and three-point-bending flexural properties were investigated for laminates with different carbon fibre volume and lay-up scheme. It is shown that hybrid composite laminates with 50% carbon fibre reinforcement provide the best flexural properties when the carbon layers are at the exterior, while the alternating carbon/glass lay-up provides the highest compressive strength.

Relationships between skin follicle characteristics and fibre properties of Suri and Huacaya alpacas and Peppin Merino sheep

We aimed to quantify the number, type and arrangement of skin follicles in Huacaya and Suri alpaca skin and correlate their follicle characteristics with fibre traits of harvested fibre and compared these relationships with those of Merino sheep. Fibre and skin samples were collected from the mid-side of 12 Huacaya alpacas, 24 Suri alpacas and 10 Merino sheep. The mean fibre diameter (MFD ± s.e.) of the Huacaya and Suri were: 35.5 ± 0.9 and 28.3 ± 1.0 μm, respectively. The follicle groups found for alpacas were very different from the normal trio of primary follicles found in sheep and goats. The follicle group of the alpacas consisted of a single primary follicle surrounded by a variable number of secondary follicles. The mean ± s.e. primary follicle density was 3.1 ± 0.3 and 2.7 ± 0.1 follicles/mm² for Huacaya and Suri, respectively. The mean ± s.e. secondary follicle density (SFD) was 13.7 ± 1.2 and 17.5 ± 0.6 follicles/mm² for Huacaya and Suri, respectively. The mean ± s.e. ratio of secondary to primary follicles (S/P ratio) was 5.1 ± 0.5 for the Huacaya and 7.3 ± 0.2 for the Suri alpacas. The sheep had higher S/P ratios and SFD, lower MFD and produced significantly heavier fleeces. The key correlations found between traits in alpacas include a negative correlation between SFD and MFD (r = –0.71, P = 0.001) and a negative correlation between S/P ratio and MFD (r = –0.44, P = 0.003) and a positive correlation between S/P ratio and total follicle density (r = 0.38, P = 0.010). The study revealed that important relationships exist between alpaca skin follicle characteristics and fibre characteristics. It was the number of secondary follicles in a group that imparts density and a corresponding reduced MFD.

Variation in the whiteness and brightness of white Australian cashmere associated with farm of origin and fibre attributes

While white cashmere is preferred by processors, its whiteness and brightness is affected by country of origin, amino acid composition, nutrition and cashmere production of goats. This work aimed to quantify the factors which affect the whiteness and brightness of 36 batches of processed Australian white cashmere sourced from nine different farms. The cashmere was tested for tristimulus values brightness (Y) and whiteness, as measured by yellowness (Y-Z). Linear models, relating Y and Y-Z were fitted to farm of origin and other objective measurements. Mean attributes (range) were: mean fibre diameter, 16.9 µm (13.9–20.4 μm); fibre curvature, 45°/mm (31–59°/mm); clean washing yield, 91.3% (79.5–97.3%); Y, 78.7 (74.7–82.2); Y-Z, 11.9 (10.3–13.6). Farm alone accounted for 72% of the variation in Y and 65% of the variation in Y-Z (P < 0.001). Once farm had been taken into account only fibre curvature (P = 0.003) was significant in predicting Y and only clean washing yield (P = 0.047) affected Y-Z. Neither the proportion of the fleece present as guard hair (clean cashmere yield) nor cashmere staple length was a significant determinant of Y or Y-Z. For each 10°/mm increase in fibre curvature Y increased 1.3 units. For each 10% increase in clean washing yield Y-Z declined 0.9 units. Variations in Y and Y-Z among farms were probably related to differences in geographic and climatic conditions and were significantly correlated to cashmere production. The effect of clean washing yield was probably related to a reduction in suint content.

Effect of manufacturing method and aging environment on painted automotive carbon fibre composite surfaces

In this paper, the effect of various aging environments on the painted surface finish of unidirectional carbon fibre composite laminates, manufactured by autoclave and a novel out-of-autoclave technique was investigated. Laminates were exposed to water immersion, 95 % relative humidity and cyclic environments for 552 h and the surface finish was evaluated using visual and wave-scan distinctness of image (DOI) techniques. It was found that the laminate surface finish was dependent on the amount of moisture in the aging test. Minor surface waviness occurred on the laminates exposed to the cyclic test, whereas, surface waviness, print through and DOI values were all significantly higher as the laminates absorbed larger quantities of moisture from the hygrothermal and hydrothermal tests. The water immersion test, which was the most detrimental to the surface finish of the painted laminates, produced dense blistering on the autoclave manufactured laminate surface whereas the out-of-autoclave laminate surface produced only a few. It was found that the out-of-autoclave laminate had high substrate surface roughness which resulted in improved paint adhesion and, therefore, prevented the formation of surface blistering with aging. © 2012 Springer Science+Business Media Dordrecht.

Hygrothermal effects on painted carbon fibre composite surfaces

In this article, the effect of hygrothermal aging on the painted surface finish of unidirectional and fabric carbon fibre composite laminates, with and without surfacing film was investigated. The results highlighted the importance of ensuring that the composite surface directly beneath the paint layer is made from a uniform material with a consistent thickness in order to minimise surface defects from occurring during aging. The surfacing film was found to minimise the print through development on the painted unidirectional and twill composite surfaces. However, the surfacing film layer was found to intermingle with the carbon fibre plies during cure, which resulted in an uneven film thickness that caused increased levels of orange peel. The twill laminate painted surface produced high levels of print through and surface waviness that was caused by the large resin rich regions located within the tow intersections at the surface which enlarged due to thermal expansion and swelling of the matrix with hygrothermal aging. It was also noted that the small resin rich regions between the individual carbon fibres on the unidirectional composite surface were sufficiently large to print through the painted surface.

Positron annihilation lifetime spectroscopy of mechanically milled protein fibre powders and their free volume aspects

The present study reports the fabrication of ultra-fine powders from animal protein fibres such as cashmere guard hair, merino wool and eri silk along with their free volume aspects. The respectively mechanically cleaned, scoured and degummed cashmere guard hair, wool and silk fibres were converted into dry powders by a process sequence: Chopping, Attritor Milling, and Spray Drying. The fabricated protein fibre powders were characterised by scanning electron microscope, particle size distribution and positron annihilation lifetime spectroscopy (PALS). The PALS results indicated that the average free volume size in protein fibres increased on their wet mechanical milling with a decrease in the corresponding intensities leading to a resultant decrease in their fractional free volumes.

Effect of fibre, yarn and knitted fabric attributes associated with wool comfort properties

In this replicated experiment, we investigated the comfort properties of single jersey fabrics composed of cashmere in blends with superfine wools of different fibre curvature (crimp) where the fibre diameter of the wool and cashmere were tightly controlled. The 81 fabrics were evaluated using the Wool ComfortMeter (WCM) which has been calibrated using wearer trials of wool knitwear. General linear modelling determined the best prediction models for log10 transformed fabric WCM values using 27 fibre, 16 yarn and 30 fabric attributes. Tighter fabrics were less comfortable. Progressively blending cashmere with wool progressively increased comfort assessment. The WCM was able to detect differences between fabrics which were more supple and springy, thinner and lighter, and were composed of more elastic, uniform and stronger yarns. Together these attributes explained 82% of the variance in WCM value.

Relationship between wearer prickle response with fibre and garment properties and Wool ComfortMeter assessment

The prickle evoked by 48 knitted fabrics was assessed by wearers under a defined evaluation protocol. The relationship between the average wearer prickle score and known properties of constituent fibre, yarns and fabrics and fabric evaluation using the Wool ComfortMeter (WCM) was determined using linear modelling. After log transformation, the best model accounted for 87.7% of the variance. The major share of variation could be attributed to differences between mean fibre diameter (MFD) and WCM values. Low prickle scores were linearly associated with lower MFD, lower WCM and lower yarn linear density. There was an indication that yarn twist affected prickle scores and that fabrics composed of cotton evoked less prickle. Measures of fibre diameter distribution or coarse fibre incidence and other fabric properties were not significant. The analysis indicates that wool garments can be constructed to keep wearer assessed prickle to barely detectable levels and textile designers can manipulate a range of parameters to achieve similar wearer comfort responses.