Continuous product innovation : a comparison of key elements across different contingency sets

This paper discusses results from an international study of continuous improvement in product innovation. The empirical research is based upon a theoretical model of continuous product innovation (CPI) that identifies contingencies, behaviours, levers and performances relevant to improving product innovation processes. As successful knowledge management is widely recognised as a key capability for firms to successfully develop CPI, companies have been classified according to identified contingencies and the impact of these contingencies on key knowledge management criteria. Comparative analysis of the identified groups of companies has demonstrated important differences between the learning behaviours found present in the two groups thus identified, and in the levers used to develop and support these behaviours. The selection of performance measures by the two groups has highlighted further significant differences in the way the two groups understand and measure their CPI processes. Finally, the paper includes a discussion of appropriate mechanisms for firms with similar contingency sets to improve their approaches to organisational learning and product innovation.

Continuous product innovation : learning behaviours and knowledge management

The research reported in this paper considers Product Innovation from a broader perspective than that of the isolated NPD (New Product Development) project commonly discussed in the literature. In this perspective, Product Innovation is a continuous and cross-functional process involving the sharing and transfer of knowledge within the many steps of the innovation process, and the integration of a growing number of different competencies inside and outside the organisational boundaries. This paper examines two in-depth case studies that were carried out to establish if and how learning occurred within companies developing new products. Based on a model developed as part of a joint Euro-Australian research project, the way in which the selected companies share and transfer knowledge and learning experiences during their product innovation processes have been examined and analysed. This model uses a number of interrelated variables including performance, behaviours and levers to stimulate improvement, contingencies, and learning/innovation capabilities to describe the learning and knowledge transfer in product innovation processes within the case studies. This paper discusses some of the skills the research has identified that managers need to enable their companies to gain a competitive advantage through improved product innovation. The ongoing research has developed, tested and disseminated a computer-based methodology to assess organisational knowledge capture and transfer in the new product development process. The research is part of the Euro-Australian co-operation project known as CIMA (Continuous Improvement and Product Innovation Management).

Collaborative improvement : interplay but not a game

Collaboration literally means working together. Collaborative improvement is an extension of continuous improvement and can be defined as a purposeful inter-company interactive process that focuses on continuous incremental innovation aimed at enhancing the collaboration’s overall performance. Developing collaborative improvement is a protracted and difficult process. Previous research has identified a number of factors affecting that process and suggested that it is not so much the individual factors, but rather their interplay that determines the successful development of collaborative improvement. This article reports research aimed at developing a deeper understanding of that interplay. Ten relationships between ten factors are presented and discussed. It appears that vision, approach, trust and commercial reality are the strongest factors. These factors are, however, influenced by, or affect the other factors, notably national culture, partner characteristics and competences, the use of power, individual behaviour and commitment. The way this interplay develops varies from case to case and has great influence on the development of collaborative improvement.

Knowledge management in continuous product innovation : a contingent approach

There is a growing interest in new organisational forms and integrated managerial and technological approaches supporting companies in continuously innovating their products and processes to survive in a turbulent environment. Successful product innovation will more and more depend upon a company's ability to manage knowledge and integrate a growing number of competencies within and outside the organisational boundaries. These abilities require a complex set of interrelated managerial, technological and organisational conditions that must be designed according to the individual firm's characteristics. This paper aims to identify and analyse the relation between individual firms' contingent variables and managerial approaches to foster knowledge management in product innovation. Evidence is based on a survey of 70 companies, including European and Australian firms, developed within the Euro-Australian cooperation project entitled CIMA (Continuous Improvement for global innovation management).

Improving wool/polyester yarn quality by transposal spinning with movable balloon control ring

To improve yarn quality in ring spinning frame, this paper examines transposal spinning with the movable balloon control ring. The left-transposal spinning and the right-transposal spinning were experimented to spin two yarns; after installing the movable balloon control ring, the two methods were respectively used to spin two other yarns again. All the experiments were on the same ring frame and the raw material was wool/polyester blend roving with a ration of 30/70. The main quality indexes of the four yarns were tested and analyzed, including hairiness, tensile property, evenness and usual faults. The results show that the yarn spun by the left-transposal spinning has a better quality than the right-transposal spinning, and after adding the movable balloon control ring, the improvement of yarn hairiness strength and evenness, as well usual faults, is very obvious. So, in the advantage of transposal spinning, the method of installing the movable balloon control ring can improve some deteriorative problems and make yarn quality better. In addition, the method gives new insight into energy efficiency. The research in this field in on the way and the result is in accord with the Low-carbon Economy.

The effect of resistance training on functional capacity and quality of life in individuals with high and low number of metabolic risk factors

OBJECTIVE—There are limited data on the effects of resistance training on the capacity to perform activities of daily living (ADLs) and quality of life (QoL) for individuals with a high number of metabolic risk factors (HiMF). In this study, we examined the effect of resistance training on the capacity to perform ADLs and QoL in individuals with HiMF and compared any benefits with individuals with a low number of metabolic risk factors (LoMF).

RESEARCH DESIGN AND METHODS—Fifty-five untrained individuals, aged 50.8 ± 6.5 years, were randomized to four groups: HiMF training (HiMFT), HiMF control, LoMF training (LoMFT), and LoMF control. At baseline and after 10 weeks of resistance training, participants underwent anthropometric measurements and assessments of aerobic power (Vo2peak), muscle strength, capacity to perform ADLs, and a self-perceived QoL questionnaire. A repeated-measures ANOVA was used to examine the effect of training over time among groups.

RESULTS—Training increased lean body mass in both HiMFT (P = 0.03) and LoMFT (P = 0.03) groups. Total fat content and Vo2peak improved in the LoMFT group only. Muscle strength improved in both training groups (P < 0.01). Time to complete ADLs was reduced by 8.8% in the LoMFT group (P < 0.01) and 9.7% in the HiMF group (P < 0.01). Only the HiMFT group reported improvement in QoL.

CONCLUSIONS— Resistance training improved muscle strength and the capacity to perform ADLs in individuals with HiMF and LoMF. Resistance training improved QoL for the HiMF group, and this result was independent of changes in body fat content or aerobic power. Longer training regimens may be needed to improve QoL in individuals with LoMF.

Health-related quality of life and functioning in bipolar disorder : the impact of pharmacotherapy

Bipolar disorder has a major deleterious impact on many aspects of a patient's functioning and health-related quality of life. Although the formal measurement of these deficits has been neglected until recently, many well-designed trials now include an assessment of functioning and health-related quality of life using one or more rating scales. This review describes recent developments in the measurement of functioning and health-related quality of life in bipolar disorder, and discusses the evidence that medications that improve symptoms in bipolar disorder also offer clinically relevant benefits in functioning and health-related quality of life. Direct comparisons of the benefits of medications including atypical antipsychotics are problematic due to differences in trial populations, study durations and rating scales. Data from quetiapine trials indicate that this medication offers prompt and sustained improvement of functioning in patients with mania and enhancement of health-related quality of life in patients with bipolar depression, to accompany the significant improvements in mood episodes.

A preliminary investigation of the utility of the "Behavior support plan quality evaluation guide II" for use in Australia

Background The quality of behaviour support plans (BSPs) can be an important influence on the quality of the support provided to people with disability who show challenging behaviours. The Behavior Support Plan Quality Evaluation Guide II (BSP-QE II) is one tool that may be useful in assessing the quality of behaviour support plans. It has previously been used to assess BSPs to support children in schools in the USA. In this preliminary study, we examined the utility of the BSP-QE II for assessing behaviour support plans designed for adults with an intellectual disability in community support services in Australia.

Method  Experienced practitioners were surveyed concerning the relevance of BSP-QE II components to the evaluation of BSPs in Australia, and an audit was conducted of randomly selected BSPs submitted as a statutory requirement to the Office of the Senior Practitioner.

Results  The BSP-QE II showed evidence of acceptable construct validity and interrater reliability. There was evidence of a need for substantial improvement in the quality of BSPs, consistent with previous findings conducted using other audit tools.

Conclusions The findings support the utility of the BSP-QE II, to inform and evaluate service planning in supporting adults with intellectual disability who show challenging behaviour.

A flexible receiver-driven cache replacement scheme for continuous media objects in best-effort networks

In this paper, we investigate the potential of caching to improve quality of reception (QoR) in the context of continuous media applications over best-effort networks. Specifically, we investigate the influence of parameters such as loss rate, jitter, delay and area in determining a proxy's cache contents. We propose the use of a flexible cost function in caching algorithms and develop a framework for benchmarking continuous media caching algorithms. The cost function incorporates parameters in which, an administrator and or a client can tune to influence a proxy's cache. Traditional caching systems typically base decisions around static schemes that do not take into account the interest of their receiver pool. Based on the flexible cost function, an improvised Greedy Dual (GD) algorithm called GD-multi has been developed for layered multiresolution multimedia streams. The effectiveness of the proposed scheme is evaluated by simulation-based performance studies. Performance of several caching schemes are evaluated and compared with those of the proposed scheme. Our empirical results indicate GD-multi performs well despite employing a generalized caching policy.

Adaptive depletion for improvement of MPEG video compression

Traditional data compression algorithms for 2D images work using the information theoretic paradigm, attempting to reduce redundant information by as much as possible. However, through the use of a depletion algorithm that takes advantage of characteristics of the human visual system, images can be displayed using only half or a quarter of the original information with no appreciable loss of quality.

The characteristics of the human visual system that allows the viewer to perceive a higher rate of information than is actually displayed is known as the beta or picket fence effect. It is called the picket fence effect because its effect is noticeable when a person is travelling along a picket fence. Despite the person not having an unimpeded view of the objects behind the fence at any instant, as the person is moving, the objects behind the picket fence are clearly visible. In fact, in most cases the fence is hardly noticeable at all.

The techniques we have developed uses this effect to achieve higher levels of compression than would otherwise be possible. As a fundamental characteristic of the beta effect is the requirement that there is movement of the fence in relation to the object, the beta effect can only be used in image sequences where movement between the depletion pattern and objects within the image can be achieved.

As MPEG is the recognised standard by which image sequences are coded, compatibility with MPEG is essential. We have modified our technique such that it performs in conjunction with MPEG, providing further compression over MPEG.

The spiral of learning : 4 R’s of education

The purpose of this paper is to explore the integration of learning, continuous improvement theories and reflective evaluation for enhancing management education. Conceptual development is combined with the outcomes of a pilot focus group as an example of reflective evaluation. The Spiral of Learning concept is uniquely augmented through hermeneutics, action research and the Deming cycle. Four R’s are identified in the Spiral of Learning: Review, Revise, Reconstruct and Reveal. Recommendations for each of the 4 R’s are made to assist continuous improvement of management education. For instance, emerging suites of social software appropriately chosen, timed and applied can assist student learning. Direct human connection in some form is recommended for learners when information is delivered online. The concepts and resultant recommendations inform practice through prioritization of online applications and development of appropriate checks and balances by academics and administrators.

A generalised cost-aware caching scheme for caching continuous media objects in best-effort network environments

In this paper, we investigate the potential of caching to improve QoS in the context of continuous media applications over wired best-effort networks. We propose the use of a flexible caching scheme, called GD-Multi in caching continuous media (CM) objects. An important novel feature of our scheme is the provision of user or system administrator inputs in determining the cost function. Based on the proposed flexible cost function, Multi, an improvised Greedy Dual (GD) replacement algorithm called GD-multi (GDM) has been developed for layered multi-resolution multimedia streams. The proposed Multi function takes receiver feedback into account. We investigate the influence of parameters such as loss rate, jitter, delay and area in determining a proxy’s cache contents so as to enhance QoS perceived by clients. Simulation studies show improvement in QoS perceived at the clients in accordance to supplied optimisation metrics. From an implementation perspective, signalling requirements for carrying QoS feedback are minimal and fully compatible with existing RTSP-based Internet applications.

Impact of depression treatment on mental and physical health-related quality of life of cardiac patients : a meta-analysis

PURPOSE: To conduct a meta-analysis evaluating the effectiveness of depression treatment on mental and physical health-related quality of life (HRQOL) of cardiac patients.

METHODS: Studies were identified using medical, health, psychiatry, psychology, and social sciences databases. Inclusion criteria were (1) 1 or more control conditions, (2) random assignment to condition after admission for myocardial infarction (MI)/acute coronary syndrome, after recording positive results on a depression screener, (3) documentation of depression symptoms at baseline, (4) depression management as a component of the rehabilitation/intervention, (5) validated measure of HRQOL as an outcome, at minimum 6-month followup. For meta-analysis, mental and physical HRQOL were the end points studied, using standardized mean differences for continuous outcome measures, with 95% confidence intervals. Heterogeneity was explored by calculating I2 statistic.

RESULTS: Five randomized controlled trials included in the analysis represented 2105 participants (1058 intervention vs 1047 comparator). Compared with a comparator group at 6 months, a test for overall effect demonstrated statistically significant improvements in mental HRQOL in favor of the intervention (standardized mean differences = −0.29 [−0.38 to −0.20], [P < .00001]; I2 = 0%). Depression treatment had a modest yet significant impact on physical HRQOL (standardized mean differences = −0.14 [−0.24 to −0.04] [P = .009]; I2 = 15%).

CONCLUSION: While the impact of post-MI depression interventions on physical HRQOL is modest, treatment can improve mental HRQOL in a significant way. Future research is required to develop and evaluate a program that can achieve vital improvements in overall HRQOL, and potentially cardiovascular outcomes, of cardiac patients.

A model to select processes for IT service management improvement

IT organisations are continually seeking improvements in managing IT service management processes. The selection of relevant processes to improve is one of the most crucial initial decisions to make in service improvement projects. In this paper, we focus on developing a process selection decision model using service perception factors from the Service Quality (SERV-QUAL) model and business drivers from the Balanced Scorecard perspectives along with the main objective of service improvement as improvement driver. We use a Design Science Research method to develop the model and then a prototype from our proposed model. We establish an evaluation protocol to determine the effectiveness of the prototype which will be demonstrated in a case organisation. The main contribution of the paper is to provide evidence-based decision support for IT service providers to select the most relevant service processes to improve.

Characterization of the improvement in depressive symptoms following Bariatric surgery

Background : The Beck Depression Inventory (BDI) has been frequently employed as a measure of depression in studies of obesity, with the majority of studies reporting an improvement in scores following weight loss. Given the potential similarity in obesity-related and depressive symptoms, it is uncertain whether all components of depression would improve equally with weight loss.

Method : The study included obese patients who had undergone laparoscopic adjustable gastric banding (LAGB) surgery and had completed BDIs at baseline and 1 year after surgery. Two groups of patients were included, a general background group (N = 191, mean age = 41 ± 9, mean BMI = 43 ± 8) and a group identified as experiencing elevated depressive symptoms based on BDI scores ≥23 (EDS group; (N = 67, mean age = 40 ± 9, mean BMI = 45 ± 7).

Results : Overall, BDI scores fell for both groups, background group at baseline 17 ± 9–8 ± 7 at 1 year and for the EDS group at baseline 30 ± 5–14 ± 10 at 1 year. Patient scores on the negative self-attitude subscale were significantly greater than the two other subscales and showed the greatest improvement 1 year following LAGB. Preexisting antidepressant therapy had little or no association on the BDI scores or on its change following weight loss.

Conclusion : High rates of depression are continually reported in obesity, as is a remarkable decrease in depressive symptoms following weight loss. Negative attitudes towards one’s self appears to be driving elevated BDI scores rather than the overlap in physical symptoms between obesity and depression.