Forming and sustaining partnerships to provide integrated services for young people : an overview based on the headspace Geelong experience

Aim: To discuss critical considerations in the formation and maintenance of agency partnerships designed to provide integrated care for young people.

Methods: Two years after its establishment, an evaluation of the headspace Barwon collaboration and a review of the health-care and management literature on agency collaboration were conducted. The principal findings together with the authors' experience working at establishing and maintaining the partnership are used to discuss critical issues in forming and maintaining inter-agency partnerships.

Results: Structural and process considerations are necessary but not sufficient for the successful formation and maintenance of inter-agency partnerships and integrated care provision. Specifically, organizational culture change and staff engagement is a significant challenge and planning for this is essential and often neglected.

Conclusions: Although agreeing on common goals and objectives is an essential first step in forming partnerships designed to provide integrated care, goodwill is not enough, and the literature consistently shows that most collaborations fail to meet their objectives. Principles and lessons of organizational behaviour and management practices in the business sector can contribute a great deal to partnership planning.

Numerical simulations on warm forming of stainless steel with trip-effect

In steels with TRIP-effect, a phase transformation from the retained-austenite to martensite occurs during forming, and it significantly affects hardening behaviours. Such an effect is sensitive to the amount of strain as well as the temperature variation. For materials with a strong TRIP-effect, new forming techniques are needed to develop that can lead to lighter and stronger components in automotive industry. This paper presents a coupled thermo-mechanical finite element modelling and simulation of a warm deep drawing of austenitic stainless steel (including a TRIP-effect) using LS-DYNA and temperature effect on forming process of such materials is investigated.

Characterising material and process variation effects on springback robustness for a semi-cylindrical sheet metal forming process

Variation in the incoming sheet material and fluctuations in the press setup is unavoidable in many stamping plants. The effect of these variations can have a large influence on the quality of the final stamping, in particular, unpredictable springback of the sheet when the tooling is removed. While stochastic simulation techniques have been developed to simulate this problem, there has been little research that connects the influence of the noise sources to springback. This paper characterises the effect of material and process variation on the robustness of springback for a semi-cylindrical channel forming operation, which shares a similar cross-section profile as many automotive structural components. The study was conducted using the specialised sheet metal forming package AutoForm^TM Sigma, for which a series of stochastic simulations were performed with each of the noise sources incrementally introduced. The effective stress and effective strain scatter in a critical location of the part was examined and a response window, which indicates the respective process robustness, was defined. The incremental introduction of the noise sources allows the change in size of the stressstrain response window to be tracked. The results showed that changes to process variation parameters, such as BHP and friction coefficient, directly affect the strain component of the stressstrain response window by altering the magnitude of external work applied to forming system. Material variation, on the other hand, directly affected the stress component of the response window. A relationship between the effective stressstrain response window and the variation in springback was also established.

e-learning through digital theatre : breaking down the tyranny of distance and limits of location

In this article, we report on a cross-disciplinary, cross-cultural digital exchange project between Australian Drama and Education students and Dutch English Language and Culture students, and examine the impact of the place-independent, technology-mediated communications and collaboration on their learning trajectories. The intensive, intercultural collaboration between the two groups of students resulted in a 50-minute group-devised, digital theatre play entitled Quarter Acre Dreaming. This play, performed through live interactive media by both Dutch and Australian students, traced the historical development of the Australian suburb, while integrating scenes of Dutch immigration into Australia. In the creative process, the students on either side of the globe interacted through Computer-Mediated Communication (CMC), and used videoconferencing and Skype for live rehearsals and discussions to advance their learning of English, their performance repertoire and cross-cultural understanding.

Sub-ppt detection limits for copper ions with Gly-Gly-His modified electrodes

An electrochemical metal ion sensor has been developed with a detection limit of less than 0.2 ppt by the covalent attachment of the tripeptide Gly-Gly-His as a recognition element to a 3-mercaptopropionic acid modified gold electrode.

Animal migration : linking models and data beyond taxonomic limits

An international workshop on animal migration was held at the Lorentz Center in Leiden, The Netherlands, 2–6 March 2009, bringing together leading theoreticians and empiricists from the major migratory taxa, aiming at the identification of cutting-edge questions in migration research that cross taxonomic borders.

Material flow forming the shoulder flow zone using scroll shoulder tool during friction stir welding of thick section aluminum alloys

Scroll shoulder tools are widely used and they do not need to be tilted during friction stir welding (FSW). However, the detailed material flow, which is important for proper scroll shoulder tool design and subsequently for forming the defect-free shoulder flow zone, has not been fully explained. In the present study, features of material flow in shoulder flow zone, during FSW of thick 6061 aluminium (Al) plates using a scroll shoulder tool were investigated. It was observed that there is a simple layer-to-layer banded structure which appears in the bottom portion of shoulder flow zone, but disappears in the top portion of this weld zone. When the scroll shoulder tool is plunged into the workpiece to a determined depth, the workpiece material is extruded by the tool pin, and pushed up into the scroll groove beneath the shoulder forming the pick-up material. During the forward movement of the tool, the central portion of pick-up material was driven downward by the root portion of pin and then it detaches from the tip portion of pin in a layer-to-layer manner to form the weld.

Modelling of bending-dominated forming processes of metal sheets

Theoretical solutions, finite element models, and experimental techniques are developed for three major sheet metal forming operations: bending (pure bending and cyclic bending), die bending, and deep drawing. These have been applied to two different commercial quality cold-rolled steels, one stainless steel, and one magnesium alloy.

Review of approximate analyses of sheet forming processes

Approximate models are often used for the following purposes: in on-line control systems of metal forming processes where calculation speed is critical; to obtain quick, quantitative information on the magnitude of the main variables in the early stages of process design; to illustrate the role of the major variables in the process; as an initial check on numerical modelling; and as a basis for quick calculations on processes in teaching and training packages. The models often share many similarities; for example, an arbitrary geometric assumption of deformation giving a simplified strain distribution, simple material property descriptions - such as an elastic, perfectly plastic law - and mathematical short cuts such as a linear approximation of a polynomial expression. In many cases, the output differs significantly from experiment and performance or efficiency factors are developed by experience to tune the models. In recent years, analytical models have been widely used at Deakin University in the design of experiments and equipment and as a pre-cursor to more detailed numerical analyses. Examples that are reviewed in this paper include deformation of sandwich material having a weak, elastic core, load prediction in deep drawing, bending of strip (particularly of ageing steel where kinking may occur), process analysis of low-pressure hydroforming of tubing, analysis of the rejection rates in stamping, and the determination of constitutive models by an inverse method applied to bending tests.

Springback data from stamping and simulating the forming of advanced high strength steel

This dataset is comprised of a spreadsheet of simulation result files, cross-section geometries of stamped parts, strain results of cross-section of stamped parts, simulation data (strain stress displacement energies), and variation data of material properties of a single coil. This data is a collection of both experimental and simulation results from industrial and laboratory stamping of advanced high strength steels (AHSS). The steels that were stamped were a typical high-strength low-alloy (HSLA) steel, a transformation-induced plasticity (TRIP) steel, a super HSLA steel, and a dual phase (DP) steel. The selected part was an automatic Ford Falcon front cross-member component using the Ford Geelong stamping plant. The variation of the material and stamped parts was also collected.

Comparison of bending of automotive steels in roll forming and in a V-die

Bending in a V-die has been used to indicate the outcome of bending in cold roll forming, although little direct correlation has been performed. In this work direct comparison of the springback in both processes was performed using six samples of automotive steels in a conventional roll forming line where the transverse springback is measured. A bend of similar radius was formed in a V-die and the springback determined. In general, the springback in V-die forming was greater than in roll forming, in some cases by a factor of 2. The theoretical springback angle was determined for all steels using a simple and approximate analytical equation and compared to the experimental roll forming and bending results. While for the roll forming process good agreement was achieved the theoretical values significantly underestimated springback in the V-bending process.

Effect of cellulose nanofiber dimensions on sheet forming through filtration

Four different cellulose nanofibers samples were prepared from northern bleached softwood kraft fibers. Fiber diameter distributions were measured from SEM images. Fiber aspect ratios ranging from 84 to 146 were estimated from fiber suspension sedimentation measurements. Three samples had heterogeneous distributions of fiber diameters, while one sample was more homogeneous. Sheet forming experiments using filters with pores ranging from 150 to 5 μm showed that the samples with a heterogeneous distribution of fiber dimensions could be easily formed into sheets at 0. 2% initial solids concentration with all filter openings. On the other hand, sheets could only be formed from the homogenous sample by using 0. 5% or more initial solids content and a lower applied vacuum and smaller filter openings. The forming data and estimated aspect ratios show reasonable agreement with the predictions of the crowding number and percolation theories for the connectivity and rigidity thresholds for fiber suspensions.

Distant relations : limits to relational contracting in domestic violence programmes

Purpose – The purpose of this paper is to assess the applicability of relational contract theory in situations where government departments contract with non-government welfare organisations to deliver human service programmes. Its limits are highlighted by an assessment of programmes for domestically violent men that epitomise “management of incomplete contracts” central to the theory.

Design/methodology/approach – The paper is based on an evaluation of contracted-out programmes for perpetrators of domestic violence in Australia that set out to compare and contrast distinct models of service delivery by documenting programme logic, service delivery effectiveness and effects on programme participants. It reflects on the difficulties of monitoring such programmes and considers the implications of this for contracting theory and for human service practice.

Findings – In contrast to critiques of contracting-out in a neo-liberal environment that emphasise how accountability and reporting requirements limit the autonomy of contracted agencies, this paper highlights considerable variation in how programmes were managed and delivered despite standardised service delivery contracts developed by the government department funding the programmes. This leads to a consideration of “incomplete contracts” where service delivery outcomes are hard to measure or there is limited knowledge of the contracted agencies by the contracting government department.

Originality/value – The paper highlights a situation in which the recommendations of relational contracting theory can exacerbate the difficulties of quality assurance rather than minimise them. It then argues a need for workforce development in the government departments and the contracted agencies, to enable a nuanced monitoring of the programmes' service delivery and promotion of quality assurance processes.

Wear mechanisms in forming of HSS and AHSS

Code : C/64/09