Feltability of cashmere and other rare animal fibres and the effects of nutrition and blending with wool on cashmere feltability

Felting is a unique attribute of animal fibres used for the production of a range of industrial and apparel textiles. Felting can be an adverse attribute as a consequence of dimensional shrinkage during laundering. As there is little objective information regarding the feltability of rare animal fibres or the factors which may affect felting three investigations were undertaken. A survey (n = 114) of the feltability of cashmere from different origins of production, cashgora, quivet, camel hair, llama, guanaco, bison wool, cow fibre and yak wool quantified the large variation between and within these fibre types. Cashmere from some origins and cashgora produced higher feltball density than the other fibres. Different nutritional management of cashmere goats (n = 35) showed that cashmere grown by poorly fed goats had a lower propensity to felt compared with cashmere grown by better fed goats. A consequence of the progressive blending of cashmere (n = 27) with a low propensity to felt superfine wool (high fibre curvature) increased the propensity of the blend to felt, but when the same cashmere was blended with low curvature superfine wool, there was little or no effect on feltability. The mechanisms which lead to variance in feltability of these fibres were quantified with multiple regression modelling. The mechanisms were similar to those reported for wools, namely variations in the resistance to compression, fibre curvature and mean fibre diameter, with likely effects of fibre crimp form. It is possible to source cashmere and other animal fibres which have different propensities to felt and therefore to produce textiles which are likely to have different textile properties.

Effect of surface functionality of PAN-based carbon fibres on the mechanical performance of carbon/epoxy composites

The performance of composite laminates depends on the adhesion between the fibre reinforcement and matrix, with the surface properties of the fibres playing a key role in determining the level of adhesion achieved. For this reason it is important to develop an in-depth understanding of the surface functionalities on the reinforcement fibres. In this work, multi-scale surface analysis of carbon fibre during the three stages of manufacture; carbonisation, electrolytic oxidation, and epoxy sizing was carried out. The surface topography was examined using scanning electron microscopy (SEM), which revealed longitudinal ridges and striations along the fibre-axis for all fibre types. A small difference in surface roughness was observed by scanning probe microscopy (SPM), while the coefficient of friction measured by an automated single fibre tester showed 51% and 98% increase for the oxidised and sized fibres, respectively. The fibres were found to exhibit heterogeneity in surface energy as evidenced from SPM force measurements. The unsized fibres were much more energetically heterogeneous than the sized fibre. A good correlation was found between fibre properties (both physical and chemical) and interlaminar shear strength (ILSS) of composites made from all three fibre types. © 2014 Elsevier Ltd.

Review on fabrication and applications of ultrafine particles from animal protein fibres

Protein fibre wastes from animal hairs, feathers and insect secreted filaments can be aptly utilized by converting them into ultra-fine particles. Particles from animal protein fibres present large surface-to-weight ratio and significantly enhanced surface reactivity, that have opened up novel applications in both textile and non-textile fields. This review article summarizes the state-of-the-art routes to fabricate ultrafine particles from animal protein fibres, including direct route of mechanical milling of fibres and indirect route from fibre proteins. Ongoing research trends in novel applications of protein fibre particles in various fields, such as biomedical science, environmental protection and composite structures are presented. © 2014 The Korean Fiber Society and Springer Science+Business Media Dordrecht.

Intrinsic tensile properties of cocoon silk fibres can be estimated by removing flaws through repeated tensile tests

 ilk fibres from silkworm cocoons have lower strength than spider silk and have received less attention as a source of high-performance fibres. In this work, we have used an innovative procedure to eliminate the flaws gradually of a single fibre specimen by retesting the unbroken portion of the fibre, after each fracture test. This was done multiple times so that the final test may provide the intrinsic fibre strength. During each retest, the fibre specimen began to yield once the failure load of the preceding test was exceeded. For each fibre specimen, a composite curve was constructed from multiple tests. The composite curves and analysis show that strengths of mass-produced Muga and Eri cocoon silk fibres increased from 446 to 618 MPa and from 337 to 452 MPa, respectively. Similarly, their toughness increased from 84 to 136 MJ m(-3) and from 61 to 104 MJ m(-3), respectively. Composite plots produced significantly less inter-specimen variations compared to values from single tests. The fibres with reduced flaws as a result of retests in the tested section have a tensile strength and toughness comparable to naturally spun dragline spider silk with a reported strength of 574 MPa and toughness of 91-158 MJ m(-3), which is used as a benchmark for developing high-performance fibres. This retesting approach is likely to provide useful insights into discrete flaw distributions and intrinsic mechanical properties of other fatigue-resistant materials.

Rapid surface functionalization of carbon fibres using microwave irradiation in an ionic liquid

The modification of carbon fibre surfaces has been achieved using a novel combination of low power microwave irradiation (20 W) in both an ionic liquid (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and an organic solvent (1,2-dichlorobenzene). The use of the ionic liquid was superior to the organic solvent in this application, resulting in a higher density of surface grafted material. As a consequence, carbon fibres treated in the ionic liquid displayed improved interfacial adhesion in the composite material (+28% relative to untreated fibres) compared to those treated in organic solvent (+18%). The methodology presented herein can be easily scaled up to industrially relevant quantities and represent a drastic reduction in both reaction time (30 min from 24 h) and energy consumption, compared to previously reported procedures. This work opens the door to potential energy and time saving strategies which can be applied to carbon fibre manufacture for high performance carbon fibre reinforced composites.